Vehicle Style: 6 Foot Bed - excluding Stepside Change
Retractable - Manual Cover Specs:
Features:
...and it retracts easily with the turn of a handle. Retractable Cover with Built-In Pull Strap The original JackRabbit retracts with the turn of a handle. The handle - located on the key latch at the tailgate end...
More Information >Retractable - Manual Cover Specs:
Features:
...of handle. Retractable Cover with Built-In Pull Strap The Full-Metal JackRabbit retracts with the turn of a handle. The handle - located on the key latch at the tailgate end of the cover - activates...
More Information >Retractable - Manual Cover Specs:
Features:
...every 12" along the rails, and it retracts easily with the turn of handle. Retractable Cover with Built-In Pull Strap The Full-Metal JackRabbit retracts with the turn of a handle. The handle -...
More Information >Retractable - Manual Cover Specs:
Features:
...Custom-fit, retractable tonneau cover protects your cargo and your vehicle's bed from the elements Fits over most 5th-wheel trailer hitches Retractable design offers full bed access...
More Information >Videos
for Tonneau Cover
Help Articles
for Tonneau Cover
Expert Answers
for Tonneau Cover
The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is…
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb…
view full answer...Your 265/70R17 size tire is around 31-1/2 inches in diameter. You want to make sure the tire cover you get is large enough and doesn't have to be stretched over the tire. I'd rather have one that's slightly loose than one that tears…
view full answer...The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…
view full answer...Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with a…
view full answer...Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…
view full answer...Great news Rick. The Firestone Ride-Rite Air Helper Springs #F2609 is compatible with the adaptive ride control on your 2024 GMC Sierra 1500 Denali. You can pair this with the Firestone Air Command #F56VV so you will be able to easily adjust the air…
view full answer...Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…
view full answer...