Towing Mirrors Specs:
Features:
Enhance your towing experience by expanding your field of vision with these towing mirrors. Custom-fit mirrors slide over your vehicle's factory mirrors to improve sightlines while towing your trailer. Tool-free installation.
Installation Notes:
Product does not fit models with telescoping mirrors
Tech Tip:
Product fits black-capped and chrome-capped models. Product does not fit full-chrome mirrors.
More Information >Towing Mirrors Specs:
Features:
Durable mirrors slide over the driver's-side and passenger's-side mirrors on your vehicle to extend your line of sight while you're towing. Felt-covered wedge locks securely fasten the slip-on mirrors in place. Tool-free installation.
Installation Notes:
Product does not fit models with telescoping mirrors
Tech Tip:
Product fits black-capped and chrome-capped models. Product does not fit full-chrome mirrors.
More Information >Videos
for Towing Mirrors
Help Articles
for Towing Mirrors
Expert Answers
for Towing Mirrors
My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…
view full answer...Hi Bruce, To lift your trailer…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...The K-Source Snap…
view full answer...The K-Source Snap…
view full answer...Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the…
view full answer...