Towing Mirrors Specs:
Features:
Custom, power towing mirrors replace the factory mirrors on your vehicle. The mirrors telescope out to extend your lines of sight. An LED arrow turn signal is built into the mirror face, and the heated glass clears frost and ice.
Tech Tip:
Mirror includes LED arrow turn signal.
More Information >Towing Mirrors Specs:
Features:
Custom, power towing mirrors replace the factory mirrors on your vehicle. The mirrors telescope out to extend your lines of sight. The built-in spotter mirrors reduce blind spots, and the heated glass on the driver's side clears frost and ice.
Installation Notes:
Additional features, such as LED turn signals, automatic dimming, and puddle lights will be lost, as these mirror replacements do not include such functions
Power, heating, and turn signal functions will only work with vehicles that originally had these features
More Information >Blind Spot Mirror Specs:
Features:
These blind spot mirrors from K-Source are custom fit to your vehicle's factory side-view mirrors. Convex shape provides a wide-angle view to help minimize blind spots. Simple peel-and-stick installation.
More Information >Towing Mirrors Specs:
Features:
These custom, power towing mirrors replace the driver's-side and passenger's-side mirrors on your vehicle and extend up to 4-1/4" to improve your line of sight. Heated mirror glass melts away ice. No-drill installation.
Installation Notes:
Additional features, such as LED turn signals, automatic dimming, and puddle lights may be lost, as these mirror replacements do not include such functions
More Information >Videos
for Towing Mirrors
Help Articles
for Towing Mirrors
Expert Answers
for Towing Mirrors
My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…
view full answer...Hi Bruce, To lift your trailer…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...The K-Source Snap…
view full answer...The K-Source Snap…
view full answer...Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the…
view full answer...