2000 Chevrolet Express Van Suspension Enhancement

Features:

3,400-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.

Installation Notes:

No drilling required for installation

Designed for use on Cutaway models only

Check vertical clearance above spring pack before purchase. Product only fits vehicles with floor pan that is higher than top of frame

Application includes models with dual rear wheels

Tech Tip:

The included polypad must be trimmed 1/4" on each end to fit.

Features:

2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.

Installation Notes:

No drilling required for installation

Designed for vehicles without rear air conditioning

Features:

1,500-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.

Installation Notes:

No drilling required for installation

The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).

Proper installation requires avoidance of air conditioning line

Features:

1,500-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.

Installation Notes:

No drilling required for installation

The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).

Proper installation requires avoidance of air conditioning line

Features:

2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Features:

2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Features:

2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Features:

2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.

Installation Notes:

No drilling required for installation

Designed for vehicles without rear air conditioning

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Features:

1,800-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.

Installation Notes:

No drilling required for installation

Designed for use on Cutaway models only

Check vertical clearance above spring pack before purchase. Product only fits vehicles with floor pan that is higher than top of frame

Features:

3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product is designed for use on Cutaway models only

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Features:

3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Designed for vehicles without rear air conditioning

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Features:

3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Designed for vehicles without rear air conditioning

Product does not fit Cutaway chassis models

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Designed for vehicles without rear air conditioning

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Designed for vehicles without rear air conditioning

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Designed for vehicles without rear air conditioning

Product does not fit Cutaway chassis models

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product is designed for use on Cutaway models only

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Features:

2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.

Installation Notes:

No drilling required for installation

Designed for vehicles without rear air conditioning

Product is designed for vehicles with approximately 3 inch wide springs

Features:

1,350-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.

Installation Notes:

No drilling required for installation

The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).

Proper installation requires avoidance of air conditioning line

Features:

1,900-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.

Installation Notes:

No drilling required for installation

The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).

Does not fit Cutaway models

Proper installation requires avoidance of air conditioning line

Features:

1,900-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.

Installation Notes:

No drilling required for installation

The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).

Does not fit Cutaway models