Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Level your vehicle when you're hauling a heavy load with these Ride Control air springs. The adjustable springs improve overall stability and ride quality, eliminate rear sag, and reduce strain on your factory suspension.
Installation Notes:
Drilling required for installation
Designed for vehicles with a steel multi-leaf suspension
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Level your vehicle when you're hauling a heavy load with these Ride Control air springs. The adjustable springs improve overall stability and ride quality, eliminate rear sag, and reduce strain on your factory suspension.
Installation Notes:
Drilling required for installation
Designed for vehicles with a steel multi-leaf suspension
More Information >Vehicle Suspension Specs:
Features:
1,100-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.
Installation Notes:
No drilling required for installation
The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).
More Information >Vehicle Suspension Specs:
Features:
1,100-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.
Installation Notes:
No drilling required for installation
The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).
More Information >Vehicle Suspension Specs:
Features:
500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling required for installation
Tech Tip:
Product does not fit vehicles with Composite Rear Springs.
More Information >Vehicle Suspension Specs:
Features:
500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling required for installation
Tech Tip:
Product does not fit vehicles with Composite Rear Springs.
More Information >Videos
for Vehicle Suspension
Help Articles
for Vehicle Suspension
Expert Answers
for Vehicle Suspension
For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based…
view full answer...What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x…
view full answer...I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles -…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...