Spare Tire Bike Racks Specs:
Features:
Pair your door-mounted spare tire with the SR1 to transport 1 or 2 bikes. Sturdy rack adjusts to center bikes on vehicles with offset spares. The mounting brace clamps around tires up to 15" wide, and 3 straps secure rack to tire.
More Information >Spare Tire Bike Racks Specs:
Features:
This rack lets you carry 2 bikes of different sizes and styles on your spare tire. It has dual arms with anti-sway cradles, and it adjusts for various tire sizes and for offset spares. Locks secure your bikes to the rack and the rack to your vehicle.
More Information >Spare Tire Bike Racks Specs:
Features:
Lightweight rack lets you carry 3 bikes on your vehicle's spare tire. Arms are offset to fit either the right or left side of your vehicle and the rear bar adjusts to fit over wider spare tires. Attaches with 2 cam-buckle straps.
More Information >Spare Tire Bike Racks Specs:
Features:
This spare-tire-mounted rack lets you carry 2 bikes on folding dual arms. SuperCush anti-sway cradles with ratcheting ZipStrip straps offer safe bike transport. Tool-free installation with universal mounting plate. Includes locks for bikes and rack.
More Information >Videos
for Spare Tire Bike Racks
Help Articles
for Spare Tire Bike Racks
Expert Answers
for Spare Tire Bike Racks
To move the arms you just need to push up on the spring loaded bolts to release the arms and swing them into place. That will move the arm up and allow you to move it freely back and forth. When you release the end of the arm with the nut and…
view full answer...For your 2015 Jeep Wrangler Unlimited Sahara we have the Rampage Mass Articulation Front Recovery Bumper #RA88509 that fits which has 1-inch D-rings so you could use the D-Ring adapter part #BX88358 with your Blue Ox tow bar.
view full answer...Yes and no. The RockyMounts AfterParty Swing Away Bike Rack #RKY37ZR can be used if your bike has a smaller fender, but if it's a larger fender that covers most of the tire then it won't work as the clamps will damage the…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…
view full answer...The backing plate of the Surco Bike Rack part #BT300 that you referenced attaches to the rim by it sliding over the mounting plate for the wheel and then using the lug nuts that attach the wheel to the vehicle as a way to secure the wheel and the…
view full answer...The etrailer Invisible Base Plate Kit part #e98946 which is a fit for a 2005 Jeep Wrangler is designed for models with the factory front bumper. It actually attaches to the bottom of the bumper beam which you can see in the attached installation…
view full answer...The good news is that I have an alternate option that will work on RV's. But the reason the Hollywood Racks SR1 2-Bike Carrier - Spare Tire Mount #HRSR1 is not rated for RV use is because that provides additional testing that is…
view full answer...The Malone Hanger Spare Tire Carrier #MPG2147 will work on the spare tire of your daughter's 2021 Jeep Wrangler since the width of your factory spare tire is 9-1/2 inches wide. As far as bike frame adapters for the Malone Hanger, you…
view full answer...The way your 1988 Suzuki Samurai is currently setup, you have both combined and separate lighting systems. The combined system means the stop and turn signals are on the same circuit whereas the separate lighting system means the stop and turn…
view full answer...The Hollywood Racks SR1 2-Bike Carrier #HRSR1 will fit most door-mounted spare tires up to 15" wide. From what I can tell your 33" Jeep tire should fit within this spec, but you'll want to double check. If you…
view full answer...When installing any trailer hitch you would have to use all attachment points specified in the instructions. So if you wanted a higher capacity hitch like #13314 you would have to have that center tow loop welded back onto the vehicle. You will…
view full answer...