2003 Chevrolet Express Van Vehicle Seat Covers

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For your 2018 Ram 2500 with the factory puck system the best 5th Wheel Hitch is the B&W OEM Companion. If you have the 8 foot bed then you will want the fixed 25K #BWRVK3600 and if you have the short…

To add a hitch to your 2024 Toyota RAV4 Prime, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver.…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Jerry, the install of the Aries Bull Bar part #AAB35-4015 do require you to permanently remove the tow hooks to install. It looks like the similar Westin Ultimate Bull Bar part #32-3645 does allow you to keep them though.

We have a similar etrailer hitch that fits your 2021 Ram 1500 Classic with the part #e98852, but the #e28ZR fits the non-Classic models.

I checked with Classic Accessories and they were able to provide me with some measurements on the Classic Accessories RV Captian Seat Cover #CA80112 seat covers. The seat back on this cover is 24 inches and the overall height is 33 inches. The…

Hey Andrew, for a mostly hidden trailer hitch that fits your 2024 Toyota Sienna XLE we have the EcoHitch part #EH22SR which only has the lower hitch opening hanging below the rear bumper. We do not have a totally hidden option.

Hello Jim, I just checked with my contact at Thule. The Replacement Non-Locking Ratchet Arm Assembly #753357902 will fit your older Thule 515-5190 bike rack.

I have a couple options for you depending on which you prefer for your 2021 Toyota RAV4 hybrid. First we have our etrailer Receiver #e23ZR which is a standard style receiver with a 2" opening. If you…

Yes, you can use the Draw-Tite #DT78MR to replace the factory hitch on your 2023 Jeep Wrangler 4xe. The Draw-Tite hitch will be rated for higher tongue weight (675 lbs) than the OEM hitch. It will be an easy bolt-on install. I have linked our…

For your race trailer with aluminum roof panels it will seal on the edges with a Butyl Tape #AL64UV. Then you will use either a Non-Sag #AL33KV or Self-Leveling #AL68KV sealant to seal the mounting screws and edges of the aluminum roof panels to…