Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…
view full answer...I do believe your walls have vertical tracks which is what you see the rub rails on the outside of the truck attached to along with the mounting holes on the inside which are securing the 2x4 boards on the inside. The etrailer Horizontal E-Track…
view full answer...The Erickson E-Track is very versatile so they isn't a specific size or model for your 5 x 8 Haulmark Transport Deluxe Cargo Trailer, just install as much or as little as you want, on the deck or on the wall. I have included a link to all of the…
view full answer...For a 3500 lb Electric Jack, I recommend the Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 3,500 lbs - Black #BD500187. This jack uses a 12 volt system, so it is compatible with your 7-way although a battery is always a…
view full answer...The trailer jack should very much NOT be powered by the breakaway battery. That was likely done by the previous owner for convenience. The breakaway battery is a dedicated battery for the breakaway system only. It needs to be able to apply the…
view full answer...It is a simple switch, so brand compatibility should be a non-issue. When the pin is pulled, two pins are allowed to contact and complete the circuit to engage the brakes. Any switch should work fine. I pulled the Hopkins Switch, part #HM20010, to…
view full answer...There will still be metal studs behind the fiber glass wall in the box truck, so you want to purchase a stud finder that is capable of detecting metal studs to attach your track to. I am not entirely sure what you are trying to build when you mention…
view full answer...The box should have metal studs on the interior, along with wood 'rub strips' that run horizontally a couple feet up above the floor. Those wooden cross members that are attached to the metal studs provide an ideal mounting point for the…
view full answer...You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…
view full answer...This is definitely a way to keep power to your refrigerator and prevent it from completely draining the battery on your trailer, though I will say that it is a very unique one. With that being said, as long as you do use 30 amp circuit breakers, like…
view full answer...On an 4 foot long section of E-track #EM19147 and 2 screws every 16 inches that is a total of 6 screws in the aluminum frame. This most likely will not get you near the capacity of the E-track. I recommend bolting through the aluminum frame so that…
view full answer...Yes, you can use Erickson Horizontal E-Track item #E19148 as front straps to hold down a car. These tracks have a 2,000 lbs maximum capacity per track. You will want to use the etrailer E-Track Backing Plates w/ Hardware item #e96RR for mounting. The…
view full answer...Filters
1674 results
Vehicle Fit
Fit 2023 Ram 1500 Classic
Related Searches