This dual-pin, two-speedjack from RAM delivers 20,000 lb of static support and 12,000 lb of lift. Its spring-return drop leg, 4-3/8" tubing, and 9" x 9" footplate provide stable, heavy-duty performance.Features: Two-speed gearbox makes raising or lowering heavy loads faster and easier Dual-pin, spring-return drop leg lets you quickly set height without cranking Heavy-duty square tubing provides stability under maximum load Large footplate keeps the jack steady and drains water away Grease fittings and brass bushings reduce wear and simplify maintenance Black powder coat finish protects against rust and corrosion Handle assembly included for smooth sidewind operation Specs: Jack type: Two-speed, sidewind Static capacity: 20,000 lb Lift capacity: 12,000 lb Drop leg: Spring-return, dual-pin Outer tube: 4-3/8" square Travel: 26-1/2" total Screw travel: 13-1/2" Drop leg travel: 13" Footplate: 9" x 9" with drainage Finish: Black powder coat Mount: Weld-on
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speedjack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speedjack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speedjack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Heavy-duty 25K capacity, 2-speedjack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Heavy-duty 25K capacity, 2-speedjack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. ... Features: Power stabilizer jacks provide an easy way to upgrad to power leveling New motor is 2x faster than previous versions Legs extend up to 30" for quick leveling New embossed legs add strength Automatically adjusts to the terrain so uneven ground is not a problem Motor indepently controls both legs for more control Switch kit allows you to easily retract and extend the jacks with the flip of a switch Heavy-gauge steel construction ensures durability Lighter weight than previous models Black powder coat finish stands up to the elements and resists corrosion Front and rear mounting applications available for maximum stability Specs: Overall dimensions: 78" long x 20" wide x 4-3/4" tall Lift: 30" Motor: 12-volt DC Mounting hole spacing: 68-11/16" from center-hole to center-hole Includes a 6 amp auto-reset circuit breaker 1-Year limited warranty
With a front-facing plunger pin and 29-1/2" retracted height, this jack offers maximum lifting power in low gear and the fastest cranking in its weight class in high gear. No need to reposition the crank to switch gears. ... Features: 2-Speed design makes cranking faster and easier Low gear: full lifting power offers smooth and easy ratio of 1" every 27 turns High gear: ultimate speed with 1" for every 9 turns - fastest in the weight class Ideal for standard agricultural, construction and industrial trailer applications Planetary gearbox makes switching gears fast and easy No need to reposition crank Eliminates need for spacers by fitting within the jack's width profile Smooth and simple operation Specially engineered alloys provide strength and stability Painted surfaces include both inner and outer tubes and drop leg Drop leg with non-spring return increases overall extension for maximum adjustability "Non-spring return" means user will need to physically lift jack at the foot to return to up position Plunger pin positioned to the front Standard footplate included Sidewind crank not included Specs: Bracket height: 29-1/2" Retracted 42" Extended Total lift: 26" Travel: 12-1/2" Drop leg: 13-1/2" Tubing width: 4" Lift capacity: 10,000 lbs Static capacity: 12,000 lbs Limited 5-year warranty
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. ... Features: Power stabilizer jacks provide an easy way to upgrad to power leveling New motor is 2x faster than previous versions Legs extend up to 30" for quick leveling New embossed legs add strength Automatically adjusts to the terrain so uneven ground is not a problem Motor indepently controls both legs for more control Switch kit allows you to easily retract and extend the jacks with the flip of a switch Heavy-gauge steel construction ensures durability Lighter weight than previous models Black powder coat finish stands up to the elements and resists corrosion Front and rear mounting applications available for maximum stability Specs: Overall dimensions: 75-1/4" long x 20" wide x 4-3/4" tall Lift: 30" Motor: 12-volt DC Mounting hole spacing: 68-11/16" from center-hole to center-hole Includes a 6 amp auto-reset circuit breaker 1-Year limited warranty
... Zinc plating resists rust and corrosion, making it ideal for marine applications. Two-speed operation allows for more control. Strap included.Features: Hand winch mounts to your truck or trailer to ease loading of ATVs, boats, and heavy equipment 2-Way ratcheting mechanism allows for simple tightening or loosening of the strap Self-locking crank ensures security while in use 2-Speed operation allows for more control while securing or releasing equipment Fast speed lets you pull in quickly Lower speed offers increased mechanical advantage to pull heavy items Neutral, freewheel position allows for quick line payout without the handle spinning Heat-treated high-carbon steel brake and gear ensure strength Zinc plated for corrosion resistance Designed for use with winch strap or steel cable 20' Black strap included Comfort grip ensures secure hold on handle SAE certified Specs: Handle length: 10" Gear ratio: Low gear: 5.1:1 High gear: 12.2:1 Drum storage: 20' long x 2" wide strap Hub diameter: 15/16" Capacity: 3,200 lbs 2-Year limited warranty
This Dutton-Lainson 2-speed, heavy-duty winch is designed for multipurpose horizontal pulling operations.Features: Heavy-duty winch is designed for horizontal pulling High carbon steel gears Permanently lubricated bearings Ergonomic handle grip Zinc TUFFPLATE finish Handle included Made in the USA Specs: Capacity: 2,000 lbs 5-Year limited warranty Double Speed Pulling Winch Specifications Model Rated Capacity (2) Drum Hub Diameter Gear Ratio Handle Length Max. Mechanical Advantage Reversible Ratchet 2-Speed Operation Max.
2-way ratcheting hand winch powers your boat onto or off of the trailer without a brake. Zinc-plated finish resists corrosion. Includes 20' x 2" strap and hook. Rated for 2,000 lbs.
Hand winch is perfect for marine use and other recreational applications that require horizontal pull. Freewheel lets you manually control strap pay out, and a ratchet pawl locks load in place. Side covers protect gears from water damage.Features: Heavy-duty, single-speed hand winch is designed for horizontal pulling applications Perfect for loading boats onto your trailer and maneuvering bulky equipment Designed to pull objects up to 1,900 lbs Freewheel mode lets you manually control strap payout Ratchet pawl locks load in place when handle stops cranking to prevent unintentional payout Ratchet can be flipped so you can crank strap from bottom of reel 20' Polyester strap with hook is strong and abrasion resistant Hard plastic gear covers protect reel from dirt and water Zinc TUFFPLATE finish is corrosion resistant Textured gray powder coat finish on base helps prevent rust Silver handle has soft and comfortable grip Mounting plate (sold separately) lets you install winch on your boat trailer or other stable surface (3) 3/8" Bolts (sold separately) required for installation Made in the USA Specs: Rated line pull (with 1 layer of strap around the reel): Static load: 1,900 lbs Rolling load: 19,000 lbs Boat pull capacity: Trailer with wooden bunks and no self-alignment capability: 1,900 lbs Standard trailer: 3,900 lbs Trailer equipped with free-turning rollers: 5,700 lbs Handle arm length: 9-1/2" Reel hub diameter: 1-1/8" Gear ratio: 5:4:1 5-Year limited warranty Note: Winches are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
This Dutton-Lainson 2-speed, heavy-duty winch is designed for multipurpose horizontal pulling operations. It has a manually controlled hand brake for load release.Features: Heavy-duty winch is designed for horizontal pulling Hand brake for manually controlled load release Perfect for boat trailers with a heavy boat or steep ramp High carbon steel heat-treated gears Permanently lubricated bearings Reversible ratchet pawl can be installed to allow cable to wind off top or bottom of reel Quick-attach handle allows easy change from high speed to low gear for heavier loads Ergonomic handle grip Zinc TUFFPLATE finish Made in the USA Specs: Capacity: 2,000 lbs Drum hub diameter: 1-1/8" 5-Year limited warranty Double Speed Pulling Winch Specifications Model Rated Capacity (2) Drum Hub Diameter Gear Ratio Handle Length Max.
Pull the side-facing plunger pins on these heavy-duty jacks to release the drop legs for an extra 8" of lift. Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.Features: Landing gear set lets you raise and lower your trailer Ideal for standard agricultural, construction, and industrial trailer applications 2 Speeds make cranking faster and easier Low gear offers full lifting power at a ratio of 1" every 34-1/2 turns High gear provides ultimate speed with 1" for every 4-1/2 turns Traditional gearbox requires you to reposition crank to switch gears Drop legs with spring return increase overall extension for maximum adjustability Plunger pins positioned to the side Footplates minimize sinking in soft ground Landing gear welds onto trailer frame Sidewind handle and connecting rod included Specs: Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 50,000 lbs 25,000 lbs per jack Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Replaces the extend/retract waterproof switch and wiring harness for your Lippert electric stabilizer jack (LC298707).Features: Replaces the extend/retract waterproof switch and wiring harness for your Lippert electric stabilizer jack (LC298707) IP66 rated switch Black color Quantity: 1 switch
Replacement gearbox fits etrailer and Ram 2-speed square jacks with a 10,000-lb capacity.Features: Replaces the gearbox on your 2-speedjack Designed for use with etrailer and Ram 2-speedjacks with a 10,000-lb capacity Small gearbox is compact to reduce interference and provides a sleek look Hardware is included
Replaces the connecting rod and allows you to operate the lead leg and follow leg of your etrailer or Ram 50,000-lb landing gear set (STLG-5003321, STLG-5003312, TJD2SPDSET-50100) at the same time.Features: Replaces the connecting rod on your etrailer or Ram 50,000-lb, 2-speed landing gear jacks (STLG-5003321, STLG-5003312, TJD2SPDSET-50100)
Replaces the switch housing for your Lippert Components high-speed power stabilizer jack (LC369774). White color.Features: Replaces the switch housing for your Lippert Components high-speed power stabilizer jack (LC369774) White color Quantity: 1 replacement housing
Replaces the switch housing for your Lippert Components high-speed power stabilizer jack (LC369774). Black color.Features: Replaces the switch housing for your Lippert Components high-speed power stabilizer jack (LC369774) Quantity: 1 black housing
Replaces the power switch for your Lippert Components high-speed power stabilizer jack (LC369774). White color.Features: Replaces the power switch for your Lippert Components high-speed power stabilizer jack (LC369774) White color Quantity: 1 replacement power switch
Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. ... Features: Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy operation with a powered drill that uses 3/8" drill bits Zinc-plated steel is durable and corrosion resistant Non-slip shank Hex socket measures 3/4" 2-Piece construction Lifetime warranty
4-1/16" L x 2-1/8" W x 1-1/8" D; Corrosion resistant; replaceable lens and bulbs; surface mount on 3" centers; 1-wire; 2-bulb incandescentDouble-Bullseye Trailer Clearance and Side Marker Light, Two-Bulb - Red This double bullseye light can be used as a clearance or marker light. The dual-bulb, red light measures 4-1/16" long x 2-1/8" wide x 1-1/8" deep.
Filters
