Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.The Curt Tire Linc (C54VV - sold separately) Bluetooth TPMS monitors the temperature and pressure of your trailer tires. All of these systems use the OneControl app so you can manage all of them in the same place on your phone. LED Status Indicator The LED indicator light on the top of the plug-in module will show you when the brake controller is connected.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LED light will flash green/blue as it calibrates.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LED light will flash green/blue as it calibrates.
Automatically level and stabilize your travel trailer with this electronic leveling system. 5 Precise, motorized jacks can be operated by the included control panel or via your smart device (if RV has Wi-Fi and factory-installed OneControl system).Wiring harnesses are also included that connect the jack motors, sensors, and the touchpad to the control module. The touchpad mounts in a compartment on the side of the trailer with a clear view of the coupler.
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 6 Precise, motorized jacks can be operated by either the included touchpad or a Bluetooth compatible app on your smartphone.This will be mounted on a crossmember near the rear jacks. The control module for the system mounts in a compartment under the coach with included hardware. This module has a wiring harness that connects directly to your 12-volt battery.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LED light will flash green/blue as it calibrates.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LED light will flash green/blue as it calibrates.
If your RV is already prepped for the Ground Control 3.0 system, this kit has everything you will need to automatically level and stabilize it, without unneeded, duplicate components.This will be mounted on a crossmember near the rear jacks. The control module for the system mounts in a compartment under the coach with included hardware. This module has a wiring harness that connects directly to your 12-volt battery.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Locate connection point in rear cargo area Plug in connector Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailerlight yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the interior trim panel in your rear cargo area.
When a sway control hitch is not an option for your squirelly trailer, use this instead. It ties into your trailer or camper's electric brakes to dampen sway the moment it starts. Works with all major OEM and aftermarket brake controllers.How To Install the Tuson Sway Control Mount the module on your trailer frame's centerline, parallel to your axle(s) Splice into your trailer's wiring Split your brake circuit into 2 separate ones Wire the left and right brakes to the module - requires 14-gauge wire extensions (sold separately) Connect to your trailer's 12-volt battery, breakaway switch, and trailer plug This device installs permanently, and most people say it takes about 3-5 hours to do so.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LED light will flash green/blue as it calibrates.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connectors plug directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Tow harness with 4-way connector plugs into connection point in rear cargo area Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailerlight yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit 1-Year limited warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights.
This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.On the top of the module is a red LED light that will blink to signal which setting it's on. Setting 1: for trailers up to 3,500 lbs (1 blink) Setting 2: for trailers 3,500 lbs - 6,900 lbs (2 blinks) Setting 3: for trailers 6,900 lbs - 12,000 lbs (3 blinks) The Autowbrake will automatically remember the weight setting and you won't need to set it again unless the weight of your trailer changes.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Powered ModuLite reduces strain on wiring system.This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights.
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.To engage the manual override, just press and hold the button on the control knob. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. Trailer wiring included.The wiring harness lets you power your trailer's lights. And the safety chain loops let you attach your trailer's safety chains. A receiver attachment is included as well for those times you need to use a bike rack or cargo carrier instead of towing your trailer.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly in OEM tow package port. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Designed for use with a factory tow package Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection point in rear cargo area Plug in T-connector Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailerlight yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's factory tow package, which is located in your cargo area, on the driver's side.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.ModuLite Powered Tail Light Converter A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.You don't need to have a trailer connected for it to calibrate; the only difference is that the knob won't illuminate at all. If your trailer is connected, the LED light will flash green/blue as it calibrates.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into OEM tow package harness - no cutting, splicing or tapping required.This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points behind tail lights Plug in T-connector Run hot lead to car battery Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailerlight yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
Filters
