Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. Black powder coat finish resists corrosion. ... Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack. This stabilizer jack is handy for leveling or stabilizing lightweight trailers.
Drop-leg jack stabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the drop leg, and pin in place. ... Features: Drop-legstabilizing jack helps keep your lightweight trailer or camper level and steady Great for loading and unloading cargo or for camping Telescoping drop leg lets you adjust the height Once welded to the trailer, pull the pin to lower the drop leg and reinsert it to keep the leg in place Round footplate provides stability Sturdy steel construction Weld-on installation Specs: Height: 20" from bottom of footplate to top of jack Travel: 18" 1-3/16" From center of hole to center of hole Drop leg width: 1-1/4" Mounting bracket dimensions: 8" long x 1-1/2" wide Footplate diameter: 5-1/4" Lift capacity: 2,000 lbs 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. Black powder coat finish resists corrosion. ... Features: Stabilizing jacks help keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jacks up for travel, down for use Drop legs extend so you can adjust the height Spring-loaded levers release drop legs for use Steel handle lets you easily fine-tune height adjustment Large foot on each jack provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Installation hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Drop leg travel: 6-1/2" Lift capacity per jack: 650 lbs Maximum load the jack can lift Support capacity per jack: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 2 jacks 1-Year warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Tired of cranking your stabilizers by hand? This double legstabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Features: Stabilizer kit provides support to help steady your RV during setup and use Power drill operation allows quick stabilization using a non-impact drill 3/4" Drill adapter is included Triangular design enhances strength and stability for improved support Time-saving function allows faster setup compared to standard manual stabilizers Manual operation capability provides backup use if a drill is not available Manual crank sold separately (LC285324) Adjustable legs allow you to set the proper height and angle for optimal stabilization Safety guidance recommends positioning telescoping leg as close to vertical as possible for maximum stability Specs: Configuration: double leg kit Weight capacity: 500 lbs per leg Item weight: 18.9 lbs 1-Year warranty
Hitch-mounted stabilizer system reduces movement of your 5th-wheel trailer, van, or RV while it's parked. Legs have 4 locking positions for 16" of adjustability. ... Just slide it into your hitch at the campsite, fold down the legs, and adjust each leg to get the length you need before securing them with the retaining clips. Hook the strap into each footpad and ratchet the strap to tug the stabilizinglegs tight.
... Skip the jack-lugging and crank-crawling. Grab your drill and drop both legs from one side before your drink has time to sweat.Do you really want to crawl back and forth under the trailer? Didn't think so. This jack lets you extend both legs from one side. Start by running the drill to lower the leg closest to you.
Folding RV stabilizer helps reduce bouncing and swaying in your parked trailer or RV when you enter or exit. Easily sets up with no tools. Adjusts to fit trailers with 14" to 28" of frame-to-ground clearance.Features: Stabilizer helps reduce bouncing and swaying in your parked RV or trailer Quick and easy setup requires no tools Tighten strap to pull legs in for increased height Loosen strap to spread legs out for less height Durable nylon strap with steel buckle has a 1,000-lb ratchet strength Folds up for compact, convenient storage Storage bag is included Lightweight aluminum construction Corrosion-resistant anodized silver power coat finish Specs: Application: trailers and RVs with 14" - 28" of clearance between the frame and the ground Individual leg length: 27" 1-Year warranty
Tired of cranking your stabilizers by hand? This single legstabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Features: Stabilizer kit provides support to help steady your RV during setup and use Power drill operation allows quick stabilization using a non-impact drill 3/4" Drill adapter is included Triangular design enhances strength and stability for improved support Time-saving function allows faster setup compared to standard manual stabilizers Manual operation capability provides backup use if a drill is not available Manual crank sold separately (LC285324) Adjustable legs allow you to set the proper height and angle for optimal stabilization Safety guidance recommends positioning telescoping leg as close to vertical as possible for maximum stability Specs: Configuration: single leg kit Weight capacity: 500 lbs 1-Year warranty
Quickly and easily stabilize your unhitched gooseneck trailer with this heavy-duty steel tripod. Adjustable-height ball makes setup a snap.Simply position the tripod beneath your trailer's coupler and release the chain that holds the stabilizer hitch ball in place. The hitch ball will rise into the gooseneck coupler.
If the 25K lift capacity of the TJD-25100 isn't enough, adding this follow leg will double it! Best for severe-duty tractor trailers, agricultural, and construction uses. Measures 13" when retracted. Drop leg adds an extra 11-1/2".Features: Companion jack works with your etrailer or Ram 2-speed jack (TJD2SP-25100 - sold separately) to raise and lower your gooseneck trailer Ideal for heavy-duty agricultural, construction and industrial trailer uses Hands-free spring return lets you retract the leg using your foot Drop leg with spring-loaded plunger pin increases overall extension for maximum adjustability Faster and easier to align than a pin and clip Round footplate minimizes sinking in soft ground Strong, stable, and durable industrial-sized steel frame Black painted inner and outer tubes Easy maintenance Built-in grease zerks make routine maintenance easy Weld on installation Sidewind handle, cross shaft, and gearbox are sold separately Specs: Lift capacity: 25,000 lbs Total travel: 24-1/2" Screw travel : 13" Drop leg travel : 11-1/2" Overall height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Outer tube length: 25" Outer tube width: 4-3/8" Inner tube width: 4" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" on center Rod shaft diameter: 1" Footplate diameter: 9-7/8" 1-Year warranty
... Legs have a combined support capacity of 3,850 lbs. Includes manual hand crank.Always be sure to raise the jacks equally to avoid bending or twisting your camper's frame, or putting uneven weight on any one the stabilizerlegs. Note: These legs are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when drop leg is released Drop leg helps bridge the gap to the ground Works as a powered jack when used with an 18V or 24V, cordless, non-impact drill (not included) Included drill adapter attaches to jack in place of handle and eliminates need to manually crank Resists rust and corrosion, even in areas with salt Wrinkled black powder coat finish has a 700-hour salt spray rating Zinc-nickel inner and outer tubes Won't shake, rattle, or overheat during operation Durable, precision-machined tubing limits rattle Composite gears dissipate heat Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Can be used as manual jack with included, sidewind handle Offers a comfortable rubber grip Easily removes for storage so you can use the drill adapter Lasts for years thanks to durable steel construction Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around the trailer frame Includes mounting hardware Specs: Application: trailer frames up to 6" tall x 6" wide Installation requires 5" of clearance along the trailer frame Lift capacity: Manual: 1,800 lbs With drill: 900 Support capacity: 7,000 lbs Bracket height (from center of top bracket hole to the ground): Retracted: 13-5/8" Extended: 40-15/16" Total lift: 26-5/8" Screw travel : 13-5/8" Drop leg travel : 13" Adjustment hole spacing on drop leg: 3-7/16" from center of hole to center of hole Clearance: 16-1/2" from mounting bracket to top of jack Inner tube dimensions: 2" x 2" Outer tube dimensions: 2-1/4" x 2-1/4" Gear ratio: 3:4 1-Year limited warranty Drill Powered Operation When you're hitching up before a long day of work, or putting away your trailer before turning in for the night, you want to be able to do it with as little effort as possible.
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. ... Independent motor control lets each leg adjust separately, giving your stabilizer more flexibility to match the ground under your trailer instead of forcing both sides to move together.
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Universal design fits either side of your trailerStabilizers aren't designated as left-hand (driver's-side) or right-hand (passenger's-side) Specs: Length: 30" 12 Month warranty
Quickly and easily stabilize your unhitched fifth-wheel trailer with this rustproof, lightweight aluminum tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.Features: Tripod holds your parked 5th-wheel trailer steady at the king pin Helps to eliminate front-to-back and side-to-side motion of unhitched trailer or RV Threaded hitch cup allows for easy height adjustment Turn the handle counterclockwise to raise cup, clockwise to lower it Included padlock inserts through holes in hitch cup to prevent removal of king pin Collapsible design Handles fold down once desired height is reached Tripod folds up for storage Extension legs (UF19-950202 - sold separately) available for applications requiring additional height Large footplates help to prevent sinking and tilting Rustproof, lightweight aluminum construction Specs: Support capacity: 1,200 lbs Height: 34" - 52" Footplate dimensions: 5" wide x 5-1/2" long Weight: 16 lbs Lifetime warranty After unhitching your fifth-wheel trailer or RV, steady it with the Ultra-Fab tripod stabilizer.
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.Features: Tripod holds your parked 5th-wheel trailer steady at the king pin Helps to eliminate front-to-back and side-to-side motion of unhitched trailer or RV Threaded hitch cup allows for easy height adjustment Turn the handle counterclockwise to raise cup, clockwise to lower it Included padlock inserts through holes in hitch cup to prevent removal of king pin Collapsible design Handles fold down once desired height is reached Tripod folds up for storage Quick latches let legs extend additional 27-1/2" Large footplates help to prevent sinking and tilting Heavy-duty steel construction Specs: Support capacity: 1,200 lbs Height: 33" - 62" Footplate dimensions: 5" wide x 5-1/2" long Weight: 25 lbs Limited lifetime warranty After unhitching your fifth-wheel trailer or RV, steady it with the Ultra-Fab tripod stabilizer.
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.Features: Tripod holds your parked 5th-wheel trailer steady at the king pin Helps to eliminate front-to-back and side-to-side motion of unhitched trailer or RV Threaded hitch cup allows for easy height adjustment Turn the handle counterclockwise to raise cup, clockwise to lower it Included padlock inserts through holes in hitch cup to prevent removal of king pin Collapsible design Handles fold down once desired height is reached Tripod folds up for storage Extension legs (UF19-950002 - sold separately) available for applications requiring additional height Large footplates help to prevent sinking and tilting Heavy-duty steel construction Specs: Support capacity: 5,000 lbs Height: 37" - 50" Footplate dimensions: 5" wide x 5-1/2" long Weight: 24 lbs Lifetime warranty After unhitching your fifth-wheel trailer or RV, steady it with the Ultra-Fab tripod stabilizer.
Cross brace bars permanently attach to your fifth wheel's landing gear to reduce your trailer's movement while parked. After installation, the braces will extend and retract with your landing gear. Hand-tighten tubes to increase stability.Features: Cross braces permanently attach to your 5th wheel's landing gear to reduce your trailer's movement while parked Braces extend and retract with landing gear for easy setup and storage Tubes adjust by hand to maximize stability Pin flags lock tubes in position Black powder coat finish resists corrosion Easy, bolt-on installation with included hardware - no drilling required Specs: Application: square, electric landing gear legs Tube dimensions: Fully retracted: 54" long x 1" diameter Fully extended: 80" long x 1" diameter Weight: 22 lbs 1-Year limited warranty Note: This stabilizer will not work with round, hydraulic landing gear legs.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landing gear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap.Simply position the tripod beneath your trailer's king pin and adjust the height of the stabilizer hitch cup so that it surrounds the king pin. Use the handle on the hitch cup to fine-tune the height of the stabilizer.
It's never been easier to stabilize, help level and help raise your travel or 5th-wheel trailer. This electric stabilizer spans the width of your rig for maximum support and has dual, 12V motors that function independently for simple leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailerStabilizes with wide side support brackets Able to be used at the front of the trailer Not recommended for use on front of motorized vehicle Dual, 12V motors operate independently of one another for simple, effective leveling Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Emergency hand crank included Sturdy steel construction Specs: Application: trailers and RVs with frames from 48" to 80" wide Bracket length: 36" Lift: 30" Weight capacity: 6,000 lbs when extended to 30" Weight capacity when legs are extended to 15" is 3,000 lbs 3-Year warranty
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.This 5,000 lb electric A-frame jack connects through your 7-way plug, so you press the switch and let the motor raise or lower your trailer. It delivers 18" of powered lift, making it a strong fit for larger campers, equipment trailers, and heavier setups. The drop leg gives you up to 9.75 inches of extra height in seconds.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.This 3,500 lb electric A-frame jack connects through your 7-way plug, so you press the switch and let the motor raise or lower your trailer. It delivers 18" of powered lift, making it a strong fit for smaller campers and light-duty trailers. The drop leg gives you up to 9.75 inches of extra height in seconds.
Filters
