Vent allows air to circulate in and out of your enclosed trailer. Easily open and close with the sliding lever to adjust the airflow. Aluminum construction is durable, lightweight, and corrosion resistant.Features: Vent allows air to circulate in and out of your enclosed trailer Easy to open - just slide the lever to open and close vent Louvres direct airflow up or down depending on how the vent is mounted (4) 2" Holes in rear of unit allow air in and out Durable, rustproof aluminum front and back plates Insert is constructed of corrosion-resistant zinc-plated steel Specs: Overall dimensions: 12-1/4" long x 10-1/2" wide 2-7/8" Between mounting holes on top (center to center) 3" Between mounting holes on sides (center to center) Ventilation hole diameter: 2" Mounting hole diameter: 7/32"
Heavy-duty, 2-part vent will stand up to the elements for years. Exterior vent houses a baffle that directs any intruding rainwater toward corner drain openings. ... Features: Rugged, heavy-duty vent holds up to whatever nature can dish out Rectangular exterior piece is designed to shed rainwater while allowing air movement Sloped shape encourages water to run off Interior baffle directs rainwater toward corner drain holes Louvers on top allow airflow Built-in, threaded holes provide mounting points for interior piece Round interior piece has a sliding door that lets you control how much air flows in and out Gasket included Sturdy steel construction White powder coated exterior vent Zinc-plated interior grille Made in the USA Specs: Fits 6" diameter hole or smaller Exterior vent dimensions: 12" long x 10" wide x 2" thick Interior vent dimensions: 7-1/4" diameter x 3/16" thick Notes: 20 Screws (sold separately) required to mount exterior piece (4) #10/32 Machine screws (not included) required to mount interior vent.
UV-resistant cover installs over your roof vent so you can open the vent and operate the fan in any weather. Zero-Leak mounting brackets and hardware eliminate the need to drill into your roof for installation.Zero-Leak Mounting Kit The Zero-Leak installation kit included with this vent cover prevents leaks by eliminating the need to drill into the roof of your RV or trailer. Instead of mounting to your roof, this vent cover mounts to the frame of your roof vent.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.If opened 50% or more, the vent will still achieve maximum airflow. The MaxxAir II has a vent area that is twice the size of the vent area on standard covers. This provides more airflow in and out of your RV or trailer, and the sidevents provide cross-ventilation for even more airflow.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.If opened 50% or more, the vent will still achieve maximum airflow. The MaxxAir II has a vent area that is twice the size of the vent area on standard covers. This provides more airflow in and out of your RV or trailer, and the sidevents provide cross-ventilation for even more airflow.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.If opened 50% or more, the vent will still achieve maximum airflow. The MaxxAir II has a vent area that is twice the size of the vent area on standard covers. This provides more airflow in and out of your RV or trailer, and the sidevents provide cross-ventilation for even more airflow.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.The FanMate has a wide vent area that maximizes airflow, preventing heat from building up inside your RV or trailer. EZClip pins make it simple to open or remove the cover for roof vent maintenance.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.The FanMate has a wide vent area that maximizes airflow, preventing heat from building up inside your RV or trailer. EZClip pins make it simple to open or remove the cover for roof vent maintenance.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.The FanMate has a wide vent area that maximizes airflow, preventing heat from building up inside your RV or trailer. EZClip pins make it simple to open or remove the cover for roof vent maintenance.
This 2-piece vent provides an inexpensive yet attractive way to ventilate your enclosed trailer. Round interior vent and half-moon-shape exterior piece are both constructed of black, UV-resistant polypropylene plastic that holds up to sun exposure.Features: Affordable trailervent provides continuous ventilation for your enclosed trailer To increase ventilation, you can install more than 1 vent 2-Piece design creates a low-profile vent that's attractive both inside and outside your trailer Half-moon piece with flat, slotted side attaches to trailer's exterior Slots are on one side only, allowing you to position the vent for best airflow and to help prevent water from getting in Drain holes at the corners let out any water that does get in Round, slotted interior piece installs inside your trailer You can easily trim vent tube to fit thin walls UV-resistant, polypropylene plastic construction stands up to the elements Black color 9 Screws and sealant (sold separately) required for installation Specs: Fits 3" diameter hole in enclosed trailer Exterior half-moon dimensions: 8" long x 6" tall x 1-1/4" thick Flange width: 1/2" Interior circular piece dimensions: Diameter at flange: 4-1/8" Vent tube outside diameter: 2-15/16" Tube depth: 1-1/2" Flange width: 5/8"
This 2-piece vent provides an inexpensive yet attractive way to ventilate your enclosed trailer. Round interior vent and half-moon-shape exterior piece are both constructed of white, UV-resistant polypropylene plastic that holds up to sun exposure.Features: Affordable trailervent provides continuous ventilation for your enclosed trailer To increase ventilation, you can install more than 1 vent 2-Piece design creates a low-profile vent that's attractive both inside and outside your trailer Half-moon piece with flat, slotted side attaches to trailer's exterior Slots are on one side only, allowing you to position the vent for best airflow and to help prevent water from getting in Drain holes at the corners let out any water that does get in Round, slotted interior piece installs inside your trailer You can easily trim vent tube to fit thin walls UV-resistant, polypropylene plastic construction stands up to the elements White color 9 Screws and sealant (sold separately) required for installation Specs: Fits 3" diameter hole in enclosed trailer Exterior half-moon dimensions: 8" long x 6" tall x 1-1/4" thick Flange width: 1/2" Interior circular piece dimensions: Diameter at flange: 4-1/8" Vent tube outside diameter: 2-15/16" Tube depth: 1-1/2" Flange width: 1/2"
Replace the vent cover on your Elixir trailer roof vent (made after 1995) or your Ventline trailer roof vent (V2094 - made before 2008) with this equivalent part. ... Features: Replacement cover for 14-1/4" x 14-1/4" roof vents Cover measures: 15" x 15" Lightweight, polypropylene domed cover Easy to install and operate White color Fits post-1995 Elixir trailer roof vents and Ventline pre-2008 trailer roof vent (V2094)
Replacement smoke colored vent cover for Ventline old-style rounded dome trailer roof vents.Features: Replacement cover for 14-1/4" x 14-1/4" roof vents Domed cover Easy to install and operate Smoke color Made of a polypropylene plastic Fits standard Ventadomes and post-1995 Elixir trailer roof vents 2-Year limited warranty
Cover protects the roof vent on your RV or enclosed trailer from rain and snow. Wing-shaped louvers allow maximum airflow through the removable grille. White opaque thermoplastic blocks sunlight.Features: Cover encloses your RV roof vent so that you can safely open the vent at any time Lets light and air in while keeping the elements out Allows you to leave your vent open while driving Maximum airflow design Removable grille has wing-shaped louvers that won't obstruct airflow like flat louvers Thermoplastic construction is durable Simple mounting - attaches to existing holes in your trailer's roof White color Made in the USA Specs: Fits all Dometic FanTastic trailer roof vents Also works with standard and high-powered vents from other manufacturers that measure 14-1/4" x 14-1/4" at the roof opening Dimensions: 23" long x 19-1/2" wide x 10-1/4" Cover weight: 5 lbs 3-Year limited warranty Vent Cover with Airfoil Technology A vent cover encloses your RV's roof vent, to protect it from the elements.
UV-resistant dome replaces the damaged or old dome on your RV or camper roof vent. No-drill installation on Ventline Ventadome. Universal-fit hinge and hardware are included for other vents. Pre-assembled dome mounts to the frame of your roof vent.With the included rust-resistant hardware, the lid mounts onto the frame of your existing roof vent. Please note that drilling is required. The universal-fit hinge also has a pre-drilled hole on either side. This allows you to install a MaxxAir standard roof vent cover (sold separately).
UV-resistant dome replaces the damaged or old dome on your RV or camper roof vent. No-drill installation on Ventline Ventadome. Universal-fit hinge and hardware are included for other vents. Pre-assembled dome mounts to the frame of your roof vent.With the included rust-resistant hardware, the lid mounts onto the frame of your existing roof vent. Please note that drilling is required. The universal-fit hinge also has a pre-drilled hole on either side. This allows you to install a MaxxAir standard roof vent cover (sold separately).
This round vent forms the interior part of the Alliance 2-piece enclosed trailervent. Constructed of UV-resistant polypropylene plastic that holds up to sun exposure. ... Features: Interior vent is the inside part of the Alliance 2-Piece Polypropylene TrailerVent for 3" Diameter Hole Fits half-moon exterior trailervent (HMAV2; sold separately) Round, slotted interior piece installs inside your trailer You can easily trim vent tube to fit thin walls UV-resistant, polypropylene plastic construction stands up to the elements Black color Specs: Fits 3" diameter hole in enclosed trailer Diameter at flange: 4-1/8" Vent tube outside diameter: 2-15/16" Tube depth: 1-1/2" Flange width: 5/8" 3 Screws (sold separately) required for installation Hole diameter: 3/16" (fits #8 screw) Sealant sold separately
Replaces the smoke-colored, wedge-shaped, polypropylene plastic cover on your Ventline Ventadome RV roof vent.Features: Replaces the wedge-shaped, polypropylene lid on Ventadome roof vents for motor homes and enclosed trailers Works with Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 Measures: 14" x 14" Smoke color Made in the USA
Replaces the white, wedge-shaped, polypropylene plastic cover on your Ventline Ventadome RV roof vent.Features: Replaces the wedge-shaped, polypropylene lid on Ventadome roof vents for motor homes and enclosed trailers Works with Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008 White color Made in the USA
This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. ... Features: Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure Simple to upgrade from non-powered model Basic, hand-operated crank rotates to open and close dome Switch to turn the fan on/off is mounted on the vent Translucent cover allows some light through Aerodynamic, wedge-shaped dome made of durable polypropylene Galvanized steel roof flange won't rust or corrode Snap-out screen is easy to clean Birch White interior trim piece (or garnish) is included Made in the USA Specs: Included garnish fits roofs 1-7/8" to 3" thick Garnish leg length (depth): 2-1/8" Garnish color: Birch White Other garnish sizes are available (sold separately) Fan power: 12-volt DC 100 CFM Cover color: white Rough opening size: 14-1/4" wide x 14-1/4" long Vent extends above roof: 4-1/2" Closed 10" Open 2-Year warranty Notes: Screws and sealer are not included.
This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. ... Be sure to surround each screw hole. Make electrical connections. Insert vent into the rough opening and align it correctly with the trailer. The flange is stamped "FRONT" on the part that should be oriented toward the front of the trailer or RV.
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.(Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.) Apply sealant to bottom of flange. Be sure to surround each screw hole. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Flat, low-profile metal vent cover opens and closes from inside with a hand-operated crank.(Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.) Apply sealant to bottom of flange. Be sure to surround each screw hole. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
Open this roof vent quickly and easily with the gear-free, spring-loaded handle. The handle locks the translucent, wedge-shaped dome into 10 different positions. ... Also, the handle's T-shape makes it easy to grip. Integrated Mounting Points for Vent Cover There are 4 mounting points built into the flange of this roof vent. These points allow you to install a vent cover (sold separately) over the roof vent.
Filters
