Easily raise or lower your boat trailer's bunk board with this slotted, zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Slotted design lets you adjust the height of the bracket during installation Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Slot dimensions: 1-1/4" long x 3/8" wide
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
8-5/8" x 3-1/4" x 1-15/16". Compact LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount to trailer with included bracket. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate Great White series features custom-cut lens optics and ultra-bright white diode for increased light output LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable black housing Clear lens over white LED Compatible with 12V DC systems Surface mount to trailer with built-in license plate bracket - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Made in the USA Specs: Dimensions: 8-5/8" long x 3-1/4" tall x 1-15/16" deep Distance between mounting holes (center on center): 3-1/2" Diodes: 1 10-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
... Surface mounts to driver side of trailer with included bracket. 3-Wire design.Features: Oval LED trailer light works as a stop, turn, tail, and license plate light for driver side applications Includes rear reflex reflector and license plate mounting bracket LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base with acrylic lens Red lens with white LEDs Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - no cutout required 3-Wire design White wire is the ground Brown wire is for the tail lights Red wire is for the stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements for automotive lighting Assembled in the USA Specs: Configuration: driver's side (left hand) Passenger side: 328-003-85 (sold separately) Dimensions: 9-1/2" long x 4" tall x 1-3/16" deep Diodes: 22 Wire length: 7" 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
8-5/8" x 2-5/8" x 2-1/2". Trailer light illuminates your license plate. Durable ABS housing and polycarbonate lens. Surface mount with included bracket. 2-Wire pigtail.Features: Trailer light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments One-piece ABS plastic construction resists corrosion Clear lens with white LED Compatible with 12V DC systems Mounts on surface of trailer with included bracket 2-Wire pigtail includes power lead and ground wire DOT approved Specs: Overall dimensions: 8-5/8" long x 2-5/8" tall x 2-1/2" deep Distance between mounting holes (center to center): 3-1/4" Diode: 1 Power draw at 12.8V: 0.054 amps Lifetime warranty on LEDs
4" Long x 1-9/16" tall x 2-5/8" deep. Incandescent trailer light illuminates your license plate. Black polycarbonate housing has a built-in bracket for surface-mount installation. 2-Wire pigtail with power and ground wires. ... Features: Light angles down to illuminate your trailer's license plate Black polycarbonate housing Clear lens Incandescent bulb is replaceable Mounts on surface of trailer with built-in ear-mount bracket 2-Wire pigtail with power and ground wires Specs: Dimensions: 4" long x 1-9/16" tall x 2-5/8" deep Mounting hole dimensions (center to center): 3-7/16" Bulb type: 194 wedge Power draw at 12.8 volts: 0.2 amps 3-Year warranty License light is a direct replacement for: Uni Bond LP1001 Truck Lite 26336 Grote 60251 Bargman 30-30-002
3-3/4" x 7/8" Oblong. Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. 2-Wire pigtail. P2 rated.Features: Dual-face LED trailer light installs on your trailer fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC systems Surface mount on trailer with included bracket 2-Wire pigtail with power lead and ground wire P2 rated light produces a 90-degree beam pattern Specs: Quantity: 1 fender light Dimensions with bracket: 3-3/4" long x 7/8" tall x 13/16" thick Distance between mounting holes (center on center): 3" Diodes: 2 Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Create a fixed-position tie-down point on your boat trailer with this heavy-duty mounting bracket. It bolts onto your trailer and provides a 30-degree mounting angle. Made of corrosion-resistant galvanized steel.Features: Creates a fixed-position tie-down on your trailer Bolts to trailer's frame, wall or floor Mounting hardware not included 30-Degree mounting angle accommodates most tie-down applications Constructed of galvanized steel - long-lasting and corrosion resistant Made in the USA Specs: Quantity: 1 bracket Length: 4" Width: 1-15/16" Small bolt hole diameter: 1/2" Large bolt hole diameter: 7/8" The 30-degree mounting angle of this bracket makes it simple to attach a rope or to hook up straps by spacing the anchor away from the wall or floor, proving easy access to the tie-down hole.
8-13/16" x 5-1/16". Incandescent trailer light serves 4 functions: stop, turn, tail, rear-reflex, and license plate light. Corrosion-resistant bulb sockets. Surface mount to trailer - hardware not included. 2-Wire design. (1) 1157 bulb.Features: Combination trailer tail light serves 5 functions Stop, turn, tail, rear reflex, and license plate light Great for enclosed trailers and RVs License light illuminates your trailer's license plate Built-in rear reflex reflector removes the need for a separate reflector Corrosion-resistant socket protects connection to ensure long-lasting function Incandescent bulb can be easily replaced Durable polycaronbate housing with polar white base Red lens and clear lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer with license plate bracket - hardware not included Mounts in horiztonal position 2-Wire design grounds to mounting hardware DOT compliant Made in the USA Specs: Configuration: driver side Passenger side: V457 (sold separately) Dimensions: 8-13/16" long x 5-1/16" tall x 2-3/4" thick Distance between license plate mounting holes (center on center): 7" Bulb type: 1157 Power draw at 12.8V: 2.2 amps 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
8-5/8" x 3-1/4". LED trailer light with ABS mounting bracket illuminates your license plate. Durable polycarbonate lens and housing. Surface mount to trailer with bracket. 2-Wire design.Features: LED light illuminates your trailer's license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer with ABS plastic mounting bracket - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Specs: Dimensions: 8-5/8" wide x 3-1/4" tall x 2-5/16" long Distance between mounting holes (center on center): 3-3/8" Diodes: 5 Power draw at 12.8V: 0.046 amps Lifetime warranty on LEDs
8-3/8" Long x 2-1/2" tall. Black molded bracket holds your trailer's standard size license plate. Built-in LED light illuminates plate. Mounts on surface of trailer - hardware included. 2-Wire pigtail.Features: License plate bracket secures and illuminates your trailer's license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable black molded plastic construction Clear lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer - mounting hardware not included 2-Wire pigtail includes power lead and ground wire SAE compliant Assembled in the USA Specs: Dimensions: 8-3/8" long x 2-1/2" tall x 2-1/2" deep Distance between mounting holes (center to center): 3" Power draw at 12V: 0.35 amps Wire lead length: 7" Voltage: 14 volts Wattage: 4.9 watts Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
Galvanized steel swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that your boat's hull fits snugly during transport. ... Features: Heavy-duty swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 11-Gauge, galvanized steel construction is sturdy and resists corrosion Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-3/8" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: 2-1/2" apart on center Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
These split roller brackets brace any size roller on your boat trailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Right- and left-hand brackets support a roller on your boat trailer Fit any length roller that has 5/8" diameter shaft Sturdy, 11-gauge, galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 pair Application: 4", 5", 8", 10", 12" and 18" long rollers Requires 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall These split panel brackets mount upright to a trailer's crossmember.
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. ... Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Works with 2-wire electrical systems Splices into your vehicle's wiring with the included quick-splice connectors Bonded wires are color coded (see wire configuration below) Attaches to your hitch with included mounting bracket and hardware Includes durable, molded-molded, standard female output socket Specs: Harness length: 60" Bracket dimensions: 1-3/4" tall x 2-3/4" long Bolt hole spacing: 1-3/4" center to center Maximum amperage: 7.5 amps per circuit Wire gauge: 16 Limited 1-year warranty 4-Way Trailer Connector Installation Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector.
4-1/8" x 1-1/4" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light. Durable polycarbonate housing and lens. Surface mount with bracket. ... If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
2-1/8" x 1-3/8" x 1-3/4". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Recessed mount with included bracket and grommet. 2-wire design with.180 male bullets.Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes.
4-1/8" x 1-1/4" Rectangle. Waterproof, LED trailer light serves as either a clearance or side marker light. Durable polycarbonate housing and lens. Surface mount with bracket. Single wire grounds through mounting hardware. ... If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
This one-piece panel bracket braces a 12" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Panel bracket supports a 12" roller on your boat trailer Bolts to your trailer's frame Mounting hardware not included Sturdy, 11-gauge galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 bracket Application: 12" rollers Accepts a 13" long x 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 10" apart on center Typically installed upright on the crossmembers of a boat trailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
This lightweight and corrosion-resistant aluminum swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that the boat's hull fits snugly during transport.Features: Swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 3 Bolt holes allow for a strong connection to the bunk board Aluminum construction is sturdy and offers superior corrosion resistance Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-1/2" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: Outer holes (center to center): 2-1/2" Inner holes (center to center): 1-1/4"
Heavier pontoons need more contact to ride steady. This wide 6-3/16" galvanized bracket spreads the load across your bunks, keeping tubes square on rough hauls while resisting spray and saltwater season after season.This bracket is cut from 11-gauge steel and hot-dip galvanized, so it holds its shape and can live outside in the weather without turning rusty.
V-wing bolster bracket supports the bunks on your pontoon boat trailer. Short bracket wings and deep cradle are great for narrow pontoons. Galvanized steel material is ideal for saltwater use.Features: Heavy-duty bracket allows you to mount 2 bunk boards on your pontoon boat trailer Mounts on your boat trailer's frame or crossmember Stabilizes bunk boards when at least 2 brackets are used (other bracket sold separately) Short bracket wings surround and stabilize narrow pontoons Deep cradle keeps your boat's pontoons from jostling side-to-side Slotted mounting hole allows for easy adjustment along frame during installation 11-Gauge, galvanized steel construction is sturdy and corrosion resistant Mounting hardware sold separately Made in the USA Specs: Quantity: 1 bracket Application: 4" wide bunk boards Maximum length: 11-3/4" Base length: 8-1/2" Maximum height: 5-1/8" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-1/2" wide x 3" long x 1-3/4" tall Hole diameter: 3/8"
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-7/8" wide x 4" long x 2-5/16" tall Hole diameter: 1/2"
Filters
