... The built-in grease zerk allows for effortless greasing. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Footplate minimizes sinking in soft ground Weld-on installation Handle (TJD-12000-HD) sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Lift: 12-1/4" Drop leg adjustment: 13-1/2" Total adjustment: 25-3/4" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Mounting hole diameter Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg, adding 13-3/4" of manual adjustment to 15" of lift. Durable screw offers increased strength. Built-in grease zerk allows effortless greasing.
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg, adding 13-1/2" of manual adjustment to 12-3/8" of lift. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
If the 25K lift capacity of the TJD-25100 isn't enough, adding this follow leg will double it! Best for severe-duty tractor trailers, agricultural, and construction uses. ...
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Lift: 13" Drop leg adjustment: 11-1/2" Total adjustment: 24-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
... Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
... Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg, adding 13-3/4" of manual adjustment to 15" of lift. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Lift capacity: 12,000 lbs Support capacity : 15,000 lbs Lift: 15" Drop leg adjustment: 13-3/4" Total adjustment: 28-3/4" Overall height: 27-1/8" Retracted 41-7/8" Extended Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" on center Jack screw diameter: 1" 1-Year warranty
Pull the front-facing plunger pin to release the drop leg for 13-1/2" of manual adjustment. The jack provides 12-3/8" of lift, while a durable screw and built-in grease zerk help ensure smooth, reliable operation. Includes a sidewind crank.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.
Pull the side-facing plunger pins on these heavy-duty jacks to release the drop legs for an extra 8" of lift. Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.
Weld-on jack has a retracted height of 24-3/4" and an extended height of 40-1/8". The square design provides solid side-load support. The drop leg adds 13-1/2" of manual adjustment to 15-3/8" of lift. Sidewind handle included.
Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". The square design provides solid side-load support. Offers 15-1/4" of lift and 13-3/4" of drop leg adjustment. Includes a foldaway topwind handle.
Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". The square design provides solid side-load support. The drop leg adds 13-1/2" of manual adjustment to 15-1/4" of lift. Foldaway handle included.
Weld-on jack has a retracted height of 24-5/8" and an extended height of 39-7/8". The square design provides solid side-load support. The drop leg adds 13-1/2" of manual adjustment to 15-1/4" of lift. Includes a sidewind handle.
Weld-on jack has a retracted height of 24" and an extended height of 39-1/2". The square design provides solid side-load support. The drop leg adds 13-3/4" of manual adjustment to 15-1/2" of lift. Foldaway handle included.
Weld-on jack has a retracted height of 25-1/8" and an extended height of 40-1/4". The square design provides solid side-load support. Offers 15-1/8" of lift and 13-3/4" of drop leg adjustment. Includes a sidewind handle.
Hooking up or leveling a loaded trailer shouldn't be a chore. This jack gives you smooth, controlled lifting so you can raise and hold it where you need it. With 5,000 lbs of support and a sidewind handle, you stay in control the whole time.
Weld-on jack has a retracted height of 24-5/8" and an extended height of 39-7/8". The square design provides solid side-load support. The drop leg adds 13-1/2" of manual adjustment to 15-1/4" of lift. Includes a sidewind handle.
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.
Replaces the cap on your etrailer or Ram square, direct-weld, sidewind jack with a 10,000-lb lift capacity (TJD-12000SP-F2, TJD-12000SP-R2, TJD-12000SP-R2NH, or TJD2SP-12000SP-F)Features: Replaces a lost or damaged cap from your etrailer or Ram square, direct-weld, sidewind jack with a 10,000-lb lift capacity Designed for TJD-12000 Series jacks (TJD-12000SP-F2, TJD-12000SP-R2, TJD-12000SP-R2NH, or TJD2SP-12000SP-F) Fits a 4" x 4" outer jack tube Quantity: 1 end cap
Replaces the inner tube and spring-return drop leg for your etrailer square, direct-weld jack with spring-return drop leg (TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH).Features: Replaces the inner tube and spring-return drop leg for your etrailer square, direct-weld jack with spring-return drop leg Works with TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH Specs: Height: 25-1/2" Drop leg adjustment: 12" Footplate dimensions: 8" long x 8" wide Quantity: 1 inner tube and spring-return drop leg assembly
Filters
