You're wiring up a breakaway system and need a switch you can trust. This one's simple. Mount it to the frame, connect the leads, and hook up the pin. If the trailer disconnects, it pulls free and completes the circuit to trigger the brakes.Specs Application: Use: for trailers with electric brakes and breakaway systems Cable Lengths: Wire leads: 7" long Construction: Housing: Plastic, sealed against moisture Pin: Spring-loaded with attached cable loop Warranty: 1-Year limited
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Unit flashes the lights on your single- or tandem-axle trailer while also activating its brakes if it disconnects from your vehicle. This way, not only will your trailer stop, but the flashing lights will also alert others on the road to the danger.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Boosts safety by also flashing your trailer's signal lights if disconnect occurs ICU system activates when breakaway cable detaches Automatically charges battery with built-in charger when connected to your vehicle Won't overcharge the battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case provides easy access to battery Self-tapping screws are sold separately Breakaway switch installs on your trailer's frame with self-tapping screws Protects the battery from rain and debris with durable, plastic case Rubber O-ring around lid helps keep water out of the box Wiring diagram is printed on the battery box lid Keeps wires neat with included wire loom Includes breakaway switch, charger, battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric brakes Breakaway cable length: 48" Charger amperage: 0.5 amps Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.Features: Makes sure your trailer safely stops if it ever separates from your vehicle Activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case allows easy access to the battery Switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Wiring diagram is printed on the battery box lid Rubber O-ring in the lid helps keep water out of the box Drain holes in the bottom of the box help with venting and letting condensation drain Kit includes breakaway switch, charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Voltage: 12V Type: Lead-acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
The battery case in this breakaway kit clamps onto your trailer's frame or jack post and includes a trickle charger. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected from your tow vehicle.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
The battery case in this breakaway kit can clamp around your trailer frame or jack post. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
LED tester lets you easily check the battery's charge. The built-in charger in this kit keeps your battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a stop should it become disconnected from your vehicle.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Use this trailer breakaway kit with your Dexter BrakeRite EHB or BrakeRite II electric-over-hydraulic actuator to bring your trailer to a stop should it become disconnected from your tow vehicle. Batteries connect in parallel.Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Provides enough power to meet or exceed the 10-amp requirement of the BrakeRite EHB and BrakeRite II Maintenance-free gel cell batteries can be used in nearly any position without leaking Tolerates heat better than other types of batteries Mounts to the inside of your trailer frame or camper compartment Top-loading cases provide easy battery access Switch installs with self-tapping screws (sold separately) Protects batteries from rain and debris with durable, plastic cases Includes 2 batteries, 2 battery boxes, and a breakaway switch Department of Transportation (DOT) compliant Specs: Application: trailers with BrakeRite EHB or BrakeRite II system Battery: Voltage: 12V Type: sealed gel cell Capacity: 10 amp-hours Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 48" Battery box dimensions: 6" long x 3-1/2 wide x 5-7/8" tall Battery box mounting holes: Center to center vertically: 2-1/2" Center to center horizontally: 6-5/8" Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Push-to-test button lets you check the battery's state of charge LED lights indicate current battery status Green = fully charged Yellow = charging Red = recharge needed Top-loading case is easy to access from above Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Wire loom neatly contains and protects wires Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on box Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 4-3/4" long x 6" wide x 4-7/8" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Mount this system to your trailer jack with included U-bolts. Breakaway system brings your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. ... If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Use with your Dexter electric-over-hydraulic brake actuator to bring your single- or tandem-axle trailer to a stop should it become disconnected from your tow vehicle. System includes charger that maintains battery.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Bring your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. Includes a charger that maintains battery so you're always ready for an emergency and U-bolts so you can mount it to your trailer jack.If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it. A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
This breakaway kit brings your trailer to a safe stop by applying the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges battery (sold separately) while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Cable detaches from switch to apply the brakes Requires 12V, 5-amp-hour battery (3801250 - sold separately) Built-in charger automatically charges battery while connected to tow vehicle Battery box attaches to trailer in either a side-load or top-load configuration Includes convenient wiring diagram Durable, plastic case protects the battery (sold separately) from the elements Rubber O-ring seal keeps out moisture Switch and battery box install on trailer frame - drilling required Hardware not included Kit includes breakaway switch, 0.5-amp charger, battery box, and wiring Specs: Application: one-axle or two-axle trailers with electric braking systems Charger amperage: 0.5 amps Breakaway cable: 4' long
If you're tired of your breakaway switch cable dragging the ground or fraying, this kit is going to be your perfect solution. It features a coiled cord, so there's no need to wrap cable around your trailer frame to prevent dragging.Features: Switch detects separation of your trailer from your tow vehicle and sends signal to your battery (sold separately) to engage brakes Coiled breakaway cable won't drag on the ground No fraying or catching on things like straight cables do Woven steel construction offers excellent strength UV-protective coating boosts durability and won't scratch your paint Included carabiner makes it easy to clip cord to your tow vehicle Easy installation with self-tapping screws (sold separately) Specs: Cable length: 4' Limited 30-day warranty
This complete breakaway kit brings your trailer to a safe stop by activating the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges the included battery while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Battery box can be mounted on your trailer frame so you can open it from either above or the side Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on the box Kit includes breakaway switch, 0.5-amp charger, 5-amp-hour battery, battery box, and wiring Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 0.5 amps Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 5-1/4" long x 5" wide x 3-1/2" tall 1-Year limited warranty
Shelves, boxes, panels, and other mounted pieces do not have to stay fixed in one cargo layout. This connector plate screws to wood or metal, then uses a spring-loaded E-track fitting so the attached piece can be installed, removed, or repositioned.Mount with 1/4" Screws: Two holes accept wood screws or self-tapping screws (sold separately). Secure up to 133 lbs WLL: Thick steel plate has a 400-lb break strength and zinc plating. Features to know about Turn a Shelf, Box, or Panel into an E-Track Attachment This connector plate mounts to wood, plywood, metal, shelving, or a box, giving that piece a direct connection to your Snap-Loc or E-track system.
If your trailer breaksaway from your tow vehicle, your brakes won't work unless they have power. This kit adds a battery and switch to keep the brakes working, and it's required by law on most trailers with EOH disc brakes.There's an LED tester on the lid that shows if the battery's charged. You can also test the full system by pulling the breakaway pin to make sure the actuator fires immediately. It's a simple way to confirm everything's ready before you tow.
This breakaway switch sounds an alarm when the pin is pulled, so you know it's working. Wire it into your trailer's brake system so if your trailer becomes uncoupled it will activate the trailer brakes, giving you time to move to safety.Features: Breakaway switch wires into your trailer's brake system to provide peace of mind If trailer becomes uncoupled, the cord attached to your tow vehicle will pull the pin from the switch, activating your trailer's brakes Pull-to-test system offers peace of mind Sounds alarm and lights up the LED when pin is pulled to let you know it's working Installs with self-tapping screws (sold separately) Dimensions: 4-5/16" long x 1-5/8" wide x 1" tall
Replaces the switch that came with your Curt trailer breakway kit. This switch signals your breakaway kit to activate your trailer's electric brakes in the event that your trailer accidently separates from your tow vehicle.
94" Long. This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
94" Long. This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
60" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
Filters
