Clamp these spring-loadedpins around your landing gear so that you can quickly and easily adjust the drop legs. Heavy-duty steel is zinc plated for corrosion resistance. ... Features: Spring-loaded quick pins make adjusting the drop legs on your landing gear a snap Pull pin to release, let go to engage Simple installation - clamps around jack leg No more losing pins Sturdy steel is zinc plated for durability and corrosion resistance Specs: Application: landing gear with up to 2-1/4" wide legs Pin diameter: 3/8" Quantity: 2 pins Lifetime warranty
... Spring-loaded mechanism makes for easy, single-handed release.Features: Spring-loaded pull pins let you upgrade from cage pins to make adjusting the drop legs on your landing gear a snap Single-handed operation - pull pin to release, let go to engage Simple installation - clamps around jack leg No more lost pins - pull pins stay connected to jack when not in use Designed for use with Stromberg Carlson manual landing gear (LG-183708) or electric landing gear (LG-1, LG-2, LG-3, and LG-4) Also works with other brands of landing gear that have 2-1/4" square leg and a 7/16" diameter pin hole Pull pins will extend 5-1/2" from the leg when installed Durable steel construction Specs: Quantity: 2 drop-leg pull pinsPin diameter: 3/8"
This spring-loaded pull pin fits your etrailer or Ram 5th-wheel landing gear jack. Replaces the standard pull pin on your jack.Features: Replaces the standard spring pull pin from your etrailer or Ram 5th-wheel landing gear Pin diameter: 3/8"
This extended-length, spring-loaded pull pin fits your etrailer or Ram 5th-wheel landing gear jack. Replaces the standard pull pin on your jack and offers an extra 4" in length.Features: Replaces the standard spring pull pin from your etrailer or Ram 5th-wheel landing gear Extended pull pin is an additional 4" long
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. ... Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up. For example, a 50,000-lb trailer has a pin weight of about 12,500 lbs. For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength. The built-in grease zerk allows for effortless greasing. ... Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up. For example, a 50,000-lb trailer has a pin weight of about 12,500 lbs. For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs.
If the 25K lift capacity of the TJD-25100 isn't enough, adding this follow leg will double it! Best for severe-duty tractor trailers, agricultural, and construction uses. Measures 13" when retracted. Drop leg adds an extra 11-1/2".Features: Companion jack works with your etrailer or Ram 2-speed jack (TJD2SP-25100 - sold separately) to raise and lower your gooseneck trailer Ideal for heavy-duty agricultural, construction and industrial trailer uses Hands-free spring return lets you retract the leg using your foot Drop leg with spring-loaded plunger pin increases overall extension for maximum adjustability Faster and easier to align than a pin and clip Round footplate minimizes sinking in soft ground Strong, stable, and durable industrial-sized steel frame Black painted inner and outer tubes Easy maintenance Built-in grease zerks make routine maintenance easy Weld on installation Sidewind handle, cross shaft, and gearbox are sold separately Specs: Lift capacity: 25,000 lbs Total travel: 24-1/2" Screw travel : 13" Drop leg travel : 11-1/2" Overall height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Outer tube length: 25" Outer tube width: 4-3/8" Inner tube width: 4" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" on center Rod shaft diameter: 1" Footplate diameter: 9-7/8" 1-Year warranty
Features stainless steel spring and pin with aluminum base, 7/16" pin diameter with handle and 1" x 1-7/8" mounting hole centers.Features: Stainless steel spring and pin Aluminum base Specs: 1" x 1-7/8" mounting hole center 7/16" pin diameter SL716SS, Spring Latch 7/16" Aluminum Base, Stainless Pin
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black powder coated finish on inner and outer tubes Sidewind handle has curved edges - no sharp ends Footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 27-1/8" Retracted 41-7/8" Extended Total lift: 28-3/4" Screw travel: 15" Drop leg travel: 13-3/4" Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Slam latch is ideal for doors on trailers or sheds that you need to get into and out of quickly. Spring-loadedpin with reverse-angled tip automatically retracts into a keeper when you slam the door shut. Zinc-plated steel resists corrosion.Features: Slam latch is ideal for trailer and shed doors Spring-loadedpin with reverse-angled tip provides easy, hands-free latching action Angled tip allows pin to automatically retract when you slam door shut Spring forces pin into keeper Square shape of spring helps to prevent distortion and tangling Cover protects internal components of latch from damage and from the elements Delivers a clean appearance Rubber handle gives you a comfortable grip on the latch Zinc-plated steel construction provides corrosion resistance Specs: Latch dimensions: 1-1/2" long x 1-1/4" wide 3/4" From center of hole to center of hole horizontally 7/8" From center of hole to center of hole vertically Pin dimensions: 2-7/8" long x 3/8" wide Cover dimensions: 1-5/8" long x 1-3/8" wide 3/4" From center of mounting hole to center of mounting hole horizontally 7/8" From center of mounting hole to center of mounting hole vertically
Slam latch is ideal for doors on trailers or sheds that you need to get into and out of quickly. Spring-loadedpin with reverse-angled tip automatically retracts into a keeper when you slam the door shut. Zinc-plated steel resists corrosion.Features: Slam latch is ideal for trailer and shed doors Spring-loadedpin with angled tip provides easy, hands-free latching action Reverse-angled tip allows pin to automatically retract when you slam door shut Spring forces pin into keeper Square shape of spring helps to prevent distortion and tangling Rubber handle gives you a comfortable grip on the latch Zinc-plated steel construction provides corrosion resistance Specs: Latch dimensions: 1-1/2" long x 1-1/4" wide 3/4" From center of hole to center of hole horizontally 7/8" From center of hole to center of hole vertically Pin dimensions: 2-7/8" long x 3/8" wide
Swap worn springs with this CE Smith 24-5/8" slipper leaf spring. Built to handle 250-lb loads, it's perfect for light-duty trailers. Features 1-leaf steel construction, 1-3/4" width, and eye-radius end for 1/2" shackle bolt fit.Features: Replace a worn or broken trailer spring with this CE Smith slipper-style leaf spring Great fit for small trailers hauling light loads up to 250 lbs Slipper design with eye-radius end installs with 1/2" shackle bolt (sold separately) Measures 24-5/8" from center of eye to end of slipper for easy size matching Single-leaf spring is 1-3/4" wide and 4-1/2" tall for reliable low-profile support Durable steel construction resists flex fatigue and road wear Weighs just 4 lbs - light enough for easy install, strong enough for steady towing Specs: Quantity: 1 leaf springSpring capacity: 250 lbs Axle capacity: 500 lbs Length from center of spring eye to end of spring (unloaded): 24-5/8" Spring width: 1-3/4" Eye diameter: 1/2" Leaf thickness: 3/8" Number of leaves: 1 End style: Eye-radius Spring weight: 4 lbs
This dual-pin, two-speed jack from RAM delivers 20,000 lb of static support and 12,000 lb of lift. Its spring-return drop leg, 4-3/8" tubing, and 9" x 9" footplate provide stable, heavy-duty performance.Features: Two-speed gearbox makes raising or lowering heavy loads faster and easier Dual-pin, spring-return drop leg lets you quickly set height without cranking Heavy-duty square tubing provides stability under maximum load Large footplate keeps the jack steady and drains water away Grease fittings and brass bushings reduce wear and simplify maintenance Black powder coat finish protects against rust and corrosion Handle assembly included for smooth sidewind operation Specs: Jack type: Two-speed, sidewind Static capacity: 20,000 lb Lift capacity: 12,000 lb Drop leg: Spring-return, dual-pin Outer tube: 4-3/8" square Travel: 26-1/2" total Screw travel: 13-1/2" Drop leg travel: 13" Footplate: 9" x 9" with drainage Finish: Black powder coat Mount: Weld-on
Replacement heavy-duty jack leg is ready to get back on the job site! Front-facing plunger pin is easy to reach when using the adjustable drop leg. Jack lifts 5 tons supported by a strong carbon steel frame. Made in the USA.Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up. For example, a 50,000-lb trailer has a pin weight of about 12,500 lbs. For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs.
Spring latch is ideal for securing trailer tailgates, ramps, and other doors. Holdback lets you secure the latch in the open position. Cone-shaped pin lets you ease the pin into a keeper, even if it's not perfectly aligned.Features: Spring latch keeps trailer tailgates, ramps, and other doors closed Pull spring-loaded latch until it clears your keeper to open Release spring-loaded latch inside of the keeper to close Holdback on pin lets you secure latch in the open position Cone-style pin allows latch to secure even when not perfectly aligned with keeper Angled edges of cone function as guides to help ease the pin into the keeper 4-Hole mounting plate for secure, bolt-on installation - hardware not included Zinc-plated steel construction provides corrosion resistance Specs: Bracket dimensions: 3" long x 1-3/4" wide Handle length: 3-3/4" Mounting hole spacing (center to center): 1-1/2" x 1-1/4" Mounting hole diameter: 1/4"
Spring latch is ideal for securing trailer tailgates, ramps, and other doors. Holdback lets you secure the latch in the open position. Cone-shaped pin lets you ease the pin into a keeper, even if it's not perfectly aligned.Features: Left-hand spring latch keeps trailer tailgates, ramps, and other doors closed Pull spring-loaded latch until it clears your keeper to open Release spring-loaded latch inside of the keeper to close Holdback on pin lets you secure latch in the open position Cone-style pin allows latch to secure even when not perfectly aligned with keeper Angled edges of cone function as guides to help ease the pin into the keeper 4-Hole mounting plate for secure, bolt-on installation - hardware not included Zinc-plated steel construction provides corrosion resistance Specs: Bracket dimensions: 3" long x 1-3/4" wide Pin length: 5-1/8" Pin diameter: 1/2" Handle length: 1-3/8" Mounting hole center to center: 1-1/4" Mounting hole diameter: 1/4"
... Ball-style pin lets you ease the pin into a keeper, even if it's not perfectly aligned.Features: Left-hand spring latch keeps gates, trailer tailgates, and other lightweight doors closed Pull spring-loaded latch until it clears your keeper to open Release spring-loaded latch inside of the keeper to close The tempered spring is properly tensioned to ensure a smooth postive pin release and return C-ring prevents spring from over-extending and snagging on the latch housing C-ring eliminates jamming and provides a secure pin retention Ball-style pin allows latch to secure even when not perfectly aligned with keeper Rounded edge provides more metal-on-metal contact while also allowing room for misalignment 2-Hole mounting plate for secure, bolt-on installation - hardware not included Durable steel construction Specs: Bracket dimensions: 7/8" long x 3/8" wide Handle length: 7/16" Pin diameter: 1/8" Pin extension: 3/16"
... Ball-style pin lets you ease the pin into a keeper, even if it's not perfectly aligned.Features: Right-hand spring latch keeps gates, trailer tailgates, and other lightweight doors closed Pull spring-loaded latch until it clears your keeper to open Release spring-loaded latch inside of the keeper to close The tempered spring is properly tensioned to ensure a smooth postive pin release and return C-ring prevents spring from over-extending and snagging on the latch housing C-ring eliminates jamming and provides a secure pin retention Ball-style pin allows latch to secure even when not perfectly aligned with keeper Rounded edge provides more metal-on-metal contact while also allowing room for misalignment 2-Hole mounting plate for secure, bolt-on installation - hardware not included Durable steel construction Specs: Bracket dimensions: 7/8" long x 3/8" wide Handle length: 7/16" Pin diameter: 1/8" Pin extension: 3/16"
Spring release latch is ideal for keeping doors and gates shut. Secures in the open or closed position. Ball-style pin lets you ease the pin into a keeper when it's not aligned. ... Features: Left-hand spring release latch keeps doors, gates, and more closed Slide spring-loaded latch until it clears your keeper to open Release spring-loaded latch inside of the keeper to close Handle can be secured in the open position or the closed position Flip handle into the notch farthest from the end of the pin to keep latch in the open position Flip handle into the notch closest to the end of the pin to keep latch in the closed position Ball-style pin allows latch to secure even when not perfectly aligned with keeper Rounded edge provides more metal-on-metal contact while also allowing room for misalignment Mounting plate features 3 holes for secure, bolt-on installation Zinc-plated steel construction provides corrosion resistance Specs: Bracket dimensions: 3-1/2" long x 1-1/4" wide Mounting hole diameter: 1/4" Pin and spring dimensions: 4-11/16" long x 3/8" diameter Pin extension: 1-1/8" F780-183Z103 Paneloc Heavy Duty Spring Release Latch - 3 Hole - Zinc Plated Steel - Left Hand 780-S-L-Zinc
Spring release latch is ideal for keeping doors and gates shut. Secures in the open or closed position. Ball-style pin lets you ease the pin into a keeper when it's not aligned. ... Features: Right-hand spring release latch keeps doors, gates, and more closed Slide spring-loaded latch until it clears your keeper to open Release spring-loaded latch inside of the keeper to close Handle can be secured in the open position or the closed position Flip handle into the notch farthest from the end of the pin to keep latch in the open position Flip handle into the notch closest to the end of the pin to keep latch in the closed position Ball-style pin allows latch to secure even when not perfectly aligned with keeper Rounded edge provides more metal-on-metal contact while also allowing room for misalignment Mounting plate features 3 holes for secure, bolt-on installation Zinc-plated steel construction provides corrosion resistance Specs: Bracket dimensions: 3-1/2" long x 1-1/4" wide Mounting hole diameter: 1/4" Pin and spring dimensions: 4-11/16" long x 3/8" diameter Pin extension: 1-1/8" F780-173Z103 Paneloc Heavy Duty Spring Release Latch - 3 Hole - Zinc Plated Steel - Right Hand 780-S-R-Zinc
... Cone-shaped pin lets you ease the pin into a keeper, even if it's not perfectly aligned.Features: Right-hand spring latch keeps gates, trailer tailgates, and other lightweight doors closed Pull spring-loaded latch until it clears your keeper to open Release spring-loaded latch inside of the keeper to close C-ring prevents spring from over-extending and snagging on the latch housing Cone-style pin allows latch to secure even when not perfectly aligned with keeper Angled edges of cone function as guides to help ease the pin into the keeper Solid mounting plate is ideal for weld-on applications Stainless steel construction provides excellent corrosion resistance Specs: Bracket dimensions: 2-3/4" long x 1-3/16" wide Pin dimensions: 3-3/4" long x 1/4" diameter Pin extension: 1/2" F714B270U005 Paneloc Spring Latch - No Hole - Stainless Steel - Right Hand - Cone End 714-CRB5-NH
... Cone-shaped pin lets you ease the pin into a keeper, even if it's not perfectly aligned.Features: Right-hand spring latch keeps gates, trailer tailgates, and other lightweight doors closed Pull spring-loaded latch until it clears your keeper to open Release spring-loaded latch inside of the keeper to close C-ring prevents spring from over-extending and snagging on the latch housing Cone-style pin allows latch to secure even when not perfectly aligned with keeper Angled edges of cone function as guides to help ease the pin into the keeper Solid mounting plate is ideal for weld-on applications Zinc-plated steel construction provides corrosion resistance Specs: Bracket dimensions: 2-3/4" long x 1-3/16" wide Pin dimensions: 3-3/4" long x 3/8" diameter Pin extension: 1/2" F714B170Z005 Paneloc Spring Latch - No Hole - Zinc Plated Steel - Right Hand - Cone End 714-SRB5-NH-ZINC
Filters
