Replaces 1 bronze eye bushing for your Lippert Equa-Flex or Center Point equalizer systems. Works on most leaf springs.Features: Replaces 1 bronze eye bushing for your Lippert Equa-Flex or Center Point equalizer systems Works on most leaf springs Specs: Length: 1.74" Inner diameter: 0.58" Outer diameter: 0.70"
Rear hanger suspends double-eye leaf spring on single-axle trailer suspension systems only.Features: Configured as rear hanger Provides attachment point for leaf spring Hanger suspends spring from trailer frame when used in conjunction with shackle straps (sold separately) Works with 9/16" diameter bolt (sold separately) Made for use with single-axle systems only Fits 1-3/4" wide double-eye springs with 9/16" diameter eyes Specs: Length: 2-1/8" Width: 1-3/4" Thickness: 1/8"
Replaces a bushing for your Roadmaster Comfort Ride slipper spring system (2580).Features: Replaces a bushing for your Roadmaster Comfort Ride slipper spring system (2580) Fits: Roadmaster Comfort Ride: 2580
Marine equalizer with corrosion-resistant coating and Nylatron bushings for quiet, durable suspension on 1-3/4" double-eye spring marine trailers.Double-Eye Spring Setup: 1-3/4" spring width and 9/16" eyes match the listed suspension layout. Replacement Size Check: 5-11/16" bolt-hole spacing and 2" height support pre-install measurement checks.
I hear you on the frustratingly slow electric jacks Eric. The quickest one we have is the Phoenix Electric Trailer Jack item #UF38-944040. With a 1,000 lbs tongue weight, this jack extends 6" in 10 seconds and retracts 6" in 8.6 seconds.…
Hey John, welcome back. The VueSMART RV and Trailer Backup Camera item #HM34FR is going to be operated by the Hopkins Towing Solutions mobile app through your phone's WiFi network. The camera creates its own local WiFi hotspot, which connects…
Hey Kerri. The Replacement Fabric item #e96QV is going to be white when it's rolled up. This black fade fabric is designed to replace the ones on 15' wide awnings like our etrailer item #e24QV. What kind of awning do you have and what color…
The CE Smith Bolster and Swivel Bracket part #CE10000G that you referenced certainly could replace the rusted out brackets on your trailer. This product is designed for doing what you are looking for so it would work well. I attached a review video…
Oil bath seals and dust covers on the hub are perfectly fine to use with a grease setup Don. All you really have to do is remove all of the oil and then pack the hubs with grease instead. For grease I would go with the LMX Red grease like the part…
Hey Jared, If your axle has a brake flange like I have pictured below then you would be able to mount a 3,500lb brake assembly #AKEBRK-35 (manual-adjust) or #AKEBRK-35-SA (self-adjust). You'll also need to replace your idler hubs with drums so…
Hello Billy. The only hub that we carry in the specifications you are looking for is the Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2 #8-407-5UC3-EZ. This hub comes with both grease caps, so it will work…
In order to determine which over/under conversion kit you'll need you will need to verify the capacity of the axles on your 2007 Jayco Jay Flight 31.5 BHDS, and that your springs are already not positioned over the axles. The best way to confirm…
The equalizers that come with the Dexter Heavy-Duty Suspension Kit #K71-448-00 have bolt holes that measure 6" apart on center and then 4" tall on center as you can see in the attached photo. You'll want to measure your current…
Hey Joe! I reached out to GE and they said the #GE25ZR spikes to 20+ amps for a split second on startup. Breakers are designed to allow very short-duration inrush spikes. A split-second surge over 20A is completely normal and won't be a problem.…
A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…
Bruce, the Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles #DX65QR is not the same as the Dexter 072-080-01, so yes the specs are correct. The spring you're referencing is the Dexter 5-Leaf Slipper Spring w/ Flat End for…
Marine equalizer with corrosion-resistant coating and Nylatron bushings for quiet, durable suspension on 1-3/4" double-eye spring marine trailers.Double-Eye Spring Setup: 1-3/4" spring width and 9/16" eyes match the listed suspension layout. Replacement Size Check: 6" bolt-hole spacing and 4" height support pre-install measurement checks.
1" ID x 2" OD x 3" Long. Replaces 1 rubber bushing with steel sleeve. Installs in the center bolt hole of your slipper spring for 10,000-lb to 15,000-lb Dexter axles.Features: Replaces rubber suspension bushing with steel sleeve Fits slipper spring suspensions for 10,000-lb to 15,000-lb Dexter axles Installs in center bolt hole of slipper springs Specs: Length: 3" Inner diameter: 1" Outer diameter: 2" Quantity: 1
Bronze bushing is designed for use with trailer suspension systems. Insert it into the eye of a leaf spring or equalizer to ensure proper sizing for suspension bolts.Features: Replacement bushing fits into 1 spring eye or 1 equalizer bolt hole of your tandem-axle trailer's suspension system Helps maintain a well-functioning system Ensures proper sizing for suspension bolts Constructed of iron graphite bronze material Specs: Inner diameter: 0.575" Outer diameter: 0.698" Length: 1-3/4" Quantity: 1 bronze bushing
Nylon bushing is designed for use with trailer suspension systems. Insert it into the eye of a leaf spring to ensure proper sizing for suspension bolts.Features: Inner diameter: 9/16" Outer diameter: 7/8" Length: 1-3/4" Quantity: 1 BU1-1568 TruRyde Nylon Bushing - 9/16" Inner Diameter, 7/8" Outer Diameter Replaces EMP605 Individual Nylon Bushing - 9/16" Inner Diameter, 7/8" Outer Diameter
Rubber bushing with steel sleeve is designed for use with trailer suspension systems. Insert bushing into the eye of your leaf spring to ensure proper sizing for suspension bolts.Features: Rubber bushing with steel sleeve is designed for use with trailer suspension systems Insert bushing into the eye of your leaf spring to ensure proper sizing for suspension bolts Specs: Inner diameter: 5/8" Outer diameter: 1-3/8" Length: 2-3/16"
Rubber bushing with steel sleeve is designed for use with trailer suspension systems. Designed for use with Dexter heavy-duty axles with 10K to 15K capacity. ... Features: Rubber bushing with steel sleeve is designed for use with trailer suspension systems Designed for use with Dexter heavy-duty axles with 10,000-lb to 15,000-lb capacity Insert bushing into the eye of your leaf spring to ensure proper sizing for suspension bolts Specs: Inner diameter: 1-1/8" Outer diameter: 2-1/8" Length: 3-3/4" Quantity: 1 bushing Rubber bushing for trailer suspension equalizers Works for 10,000-lb to 15,000-lb Dexter heavy-duty axles Inner diameter: 1-1/8" Outer diameter: 2-1/8" Length: 3-3/4"
This bushing replaces the bushing from the center bolt hole on your slipper spring equalizer for 10,000-lb Hayes axles (09138708).Features: Suspension bushing inserts into center bolt hole of slipper spring equalizer for 10,000-lb Hayes Axles (09318708) Rubber bushing has sturdy steel sleeve Specs: Length: 4" Inner dimension: 1" Outer diameter: 2-1/8" Quantity: 1
Nylon bushing is designed for use with trailer suspension systems. Insert it into the eye of a leaf spring to ensure proper sizing for suspension bolts.
Nylon bushing is designed for use with trailer suspension systems. Insert it into the eye of a leaf spring to ensure proper sizing for suspension bolts.Features: Inner diameter: 9/16" Outer diameter: 1.024" Length: 1-3/4" Quantity: 1 BU1-1561 TruRyde Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter
Nylon bushing is designed for use with trailer suspension systems. Insert it into the eye of a leaf spring to ensure proper sizing for suspension bolts.
Nylon bushing is designed for use with trailer suspension systems. Insert it into the eye of a leaf spring to ensure proper sizing for suspension bolts.Features: Inner diameter: 1/2" Outer diameter: 7/8" Length: 1-3/4" Quantity: 1 BU1-1508 TruRyde Nylon Bushing - 1/2" Inner Diameter, 7/8" Outer Diameter
Nylon bushing is designed for use with trailer suspension systems. Insert it into the eye of a leaf spring to ensure proper sizing for suspension bolts.
Nylon bushing is designed for use with trailer suspension systems. Insert it into the eye of a leaf spring to ensure proper sizing for suspension bolts.Features: Inner diameter: 7/8" Outer diameter: 1-1/8" Length: 3" Quantity: 1 BU1-3871 TruRyde Nylon Bushing - 7/8" Inner Diameter, 1-1/8" Outer Diameter
Bronze bushings are designed for use with trailer suspension systems. Insert into the eye of a leaf spring or equalizer to ensure proper sizing for suspension bolts.Features: Bushings are designed for use with trailer suspension systems Insert into the eye of a leaf spring or equalizer to ensure proper sizing for suspension bolts Constructed of iron graphite bronze material Inner diameter: 0.57" Outer diameter: 0.69" Length: 1.74" Quantity: 4 bronze bushings
Worn suspension components can lead to movement and wear over time. These bronze bushings fit most standard leaf spring eyes and help provide a durable connection point for your suspension system, supporting long-lasting performance on the road.Measure First, Order Right: 9/16" ID, 11/16" OD, and 1-3/4" length give you the key dimensions to match. Standard Leaf Spring Replacement: Fits most standard leaf spring eyes for a straightforward bushing swap. Suspension System Fit: Compatible with Equa-Flex, Road Armor, and Center Point suspension systems.
Worn suspension components can lead to movement and wear over time. These nylon bushings fit most standard leaf spring eyes and help provide a durable connection point for your suspension system, supporting long-lasting performance on the road.Highlights Measure First, Order Once: 9/16" ID, 11/16" OD, and 1-3/4" length give you the key dimensions to match. Ready for a Suspension Refresh: 4 nylon bushings cover multiple replacement points while your trailer is already apart. Good Fit for Worn Bushing Work: Matching nylon replacements take the place of old bushings during spring or shackle service.
Worn suspension components can lead to movement and wear over time. These nylon bushings fit most standard leaf spring eyes and help provide a durable connection point for your suspension system, supporting long-lasting performance on the road.Highlights Measure First, Order Once: 9/16" ID, 11/16" OD, and 1-3/4" length give you the key dimensions to match. Ready for a Suspension Refresh: 8 nylon bushings cover multiple replacement points while your trailer is already apart. Good Fit for Worn Bushing Work: Matching nylon replacements take the place of old bushings during spring or shackle service.
Filters
