Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Good question, and what happens is that leaf springs elongate over time, and since you mentioned you got measurements of 25-1/2 inches from center eye to center eye and 26 inches under partial load, the best option for leaf springs really is the…
view full answer...The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…
view full answer...I can certainly point you in the right direction. Unfortunately we do not have access to Dexter's serial number database, and I cannot recommend springs based off of axle specs. If only it were so easy right? The best way to go about replacing…
view full answer...Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…
view full answer...You can definitely use the MORryde suspension bolts if that's what you're wanting to use. The correct kit depends on what your trailer is currently equipped with and how long your shackle straps are (see attached photo of where to measure).…
view full answer...The first thing I would check on your trailer is the capacity of the springs. You need to be sure the spring capacity is rated at 1/2 the axle capacity. That way 2 springs equal the capacity of the trailer axle for proper fit. Check the arch of the…
view full answer...When replacing shackle straps they should be the same length as the ones that were previously on your tandem axle trailer (if possible); replacing them with longer straps will result in additional play in your trailer suspension which could lead to…
view full answer...The Equa-Flex Cushioned Equalizers #LC314336 are designed for 5,200 lb axles, so they can absolutely handle the weight of your 7,800 lb trailer. To install the Equa-Flex what you will need is the Lippert Components Tandem Axle Equa-Flex AP Kit - Wet…
view full answer...Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…
view full answer...We have a Westin bumper in black that is a fit for your 2008 Ford E-350 with the part #20107, but the part #61001 that you referenced does not fit your van.
view full answer...The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…
view full answer...Wheel studs can break from too much torque on them or from having them too loose which creates movement which can eventually cause them to break. My brother kept breaking wheel studs on a car he had because he was using the wrong lug nuts. In your…
view full answer...Filter Your Search
Contact and Help