Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello Pat, thanks for reaching out. All of the 1/2" x 20 wheel studs we offer have a .545" knurl diameter. If you can make that work, I recommend the DeeMaxx Drive-In Wheel Stud #DE52GR which is 2" long overall, or the #DE45GR which is…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...I spoke with the manufacturer and they stated that if you were using an adapter along with the Power Watchdog Surge Protector with Bluetooth and Emergency Shut Down - Hardwired - 50 Amp #HU27FR to step down to 30 or 15 amp service that the adapter…
view full answer...It is absolutely more cost effective to replace entire assemblies instead of brake pads. It's an easier install, the price is about the same, you don't have to be as specific when picking out the replacement parts, and you get all new braking…
view full answer...The hub/drum you sent in a picture of is a Lippert 8,000 lb axle hub with an 8 on 6-1/2 inch bolt pattern designed for oil-bath applications. The correct replacement then is the #8-285-10UC3-A.
view full answer...Finding the correct MORryde equalizer kit will be pretty specific, so I cannot tell you which will be correct without knowing the wheel spacing and axle capacity, unfortunately. With that being said, if you have the trailer's VIN, you may be able…
view full answer...The MORryde CRE3000 #MR87ZR could work for your trailer but you need to take one more measurement. On your current equalizer measure the distance between the lower bolt hole centers. If that distance is 6-1/2 inches or pretty close to that this will…
view full answer...As your axles measure 35" apart from center to center but the frame hanger spread (FHS) measured 58-3/4", you did go the correct way. The axle spacing is definitely important, but the FHS is more so. Just be aware that you axle spacing may…
view full answer...The puck feet on the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems #GY83XR is just to help stabilize the ball mount and does not lock into place in the puck. The locking mechanism on top will lock the shank into the gooseneck…
view full answer...Thanks for the picture. I went ahead and checked out what we have that matches that style of plug, and unfortunately we do not have anything that matches what you are needing. The closest 3-prong wire we have is the 3-Wire Pigtail for Trailer Tail…
view full answer...The 125255UC seal has a 1.249" ID and a 1.983" OD and for that our part #34823 will be the correct replacement.
view full answer...If your tail lights look like #STL16RB or #STL17RB, then you can use the Replacement Tail Light Lens, #A16RB.
view full answer...Related Searches
Filter Your Search
Contact and Help