Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. The curved D-ring gives hooks and straps more room to seat, so you can cinch down hard without fighting a flat ring.A Curved Ring Gives Your Tie-Down Hardware Room to Sit Right This D-ring has a bend instead of a flat ring, which helps hooks and strap hardware seat more naturally on the anchor point.
This steel D-ring tie-down kit gives you a strong, secure anchor point for hauling cargo without getting in the way. The flush-mount design sits low to prevent interference, and each pack includes 2 rings with mounting hardware.Specs Quantity: 2 D-rings Capacity: Load rating: 5,000 lbs per D-ring Construction: D-ring material: steel D-ring finish: zinc plated Mounting hardware: stainless steel Backer plates: galvanized steel
Ring terminals are used for all types of electrical work where wires need fastening For use with 12-10 gauge wire Stud size: 3/16" Vinyl insulation sleeve is yellow
Ring terminals are used for all types of electrical work where wires need fastening For use with 12-10 gauge wire Stud size: 5/16" Vinyl insulation sleeve is yellow
This blue ring terminal fits 16-14 gauge wire and has a 1/4" ring inner diameter. Insulated with heat-shrinkable nylon for adjustability and durability.Features: Fits 16-14 gauge wire 1/4" Ring inner diameter Heat-shrinkable nylon insulation allows for adjustability and provides durability Blue Quantity: 1 1-Year limited warranty
This yellow ring terminal fits 12-10 gauge wire and has a 1/4" ring inner diameter. Insulated with heat-shrinkable nylon for adjustability and durability.Features: Fits 12-10 gauge wire 1/4" Ring inner diameter Heat-shrinkable nylon insulation allows for adjustability and provides durability Yellow Quantity: 1 1-Year limited warranty
Ring terminals are used for all types of electrical work where wires need fastening For use with 12-10 gauge wire Stud size: 3/8" Vinyl insulation sleeve is yellow
This yellow ring terminal fits 12-10 gauge wire and has an inner ring diameter of 3/8". Insulated with heat-shrinkable nylon for adjustability and durability.Features: Fits 12-10 gauge wire 3/8" Ring inner diameter Heat-shrinkable nylon insulation allows for adjustability and provides durability Yellow Quantity: 1 1-Year limited warranty
This copper ring terminal fits 4-gauge wire and 3/8" studs or screws. Includes 25 percent more high-grade copper than comparable products for greater conductivity.Features: Fits 4-gauge wire Fits 3/8" studs or screws Includes 25 percent more high-grade copper for improved conductivity Specs: Inner diameter of lug barrel: 0.286" Lug wall thickness: 0.035" Quantity: 1 57025 Spectro Ring Terminal - 4 Gauge - 3/8" - Copper - Qty 1
This copper ring terminal fits 6-gauge wire and 3/8" studs or screws. Includes 25 percent more high-grade copper than comparable products for greater conductivity.Features: Fits 6-gauge wire Fits 3/8" studs or screws Includes 25 percent more high-grade copper for improved conductivity Specs: Inner diameter of lug barrel: 0.232" Lug wall thickness: 0.035" Quantity: 1 57016 Spectro Ring Terminal - 6 Gauge - 3/8" - Copper - Qty 1
This copper ring terminal fits 4-gauge wire and 3/8" studs or screws. Includes 25 percent more high-grade copper than comparable products for greater conductivity. ...
This copper ring terminal fits 8-gauge wire and 3/8" studs or screws. Includes 25 percent more high-grade copper than comparable products for greater conductivity.Features: Fits 8-gauge wire Fits 3/8" studs or screws Includes 25 percent more high-grade copper for improved conductivity Specs: Inner diameter of lug barrel: 0.184" Lug wall thickness: 0.03" Quantity: 1 57006 Spectro Ring Terminal - 8 Gauge - 3/8" - Copper - Qty 1
This copper ring terminal fits 2/0-gauge wire and 3/8" studs or screws. Includes 25 percent more high-grade copper than comparable products for greater conductivity.Features: Fits 2/0-gauge wire Fits 3/8" studs or screws Includes 25 percent more high-grade copper for improved conductivity Specs: Inner diameter of lug barrel: 0.461" Lug wall thickness: 0.050" Quantity: 1 57048 Spectro Ring Terminal - 2/0 Gauge - 3/8" - Copper - Qty 1
This copper ring terminal fits 2/0-gauge wire and 3/8" studs or screws. Includes 25 percent more high-grade copper than comparable products for greater conductivity. ...
This copper ring terminal fits 6-gauge wire and 3/8" studs or screws. Includes 25 percent more high-grade copper than comparable products for greater conductivity. ...
Features: Ring terminals are used for all types of electrical work where wires need fastening For use with 16-14 gauge wire Stud size: 1/4" Vinyl insulation sleeve is blue
Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Corrosion-resistant clear zinc finish for durability Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 11" Retracted 21-1/2" Extended Lift: 10-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 7-3/4" Lift capacity: 2,000 lbs 1-Year warranty
Rust-resistant jack has a retracted height of 16" and an extended height of 31-1/4". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Outer tube has corrosion-resistant black powder coat Corrosion-resistant clear zinc finish for durability Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 16" Retracted 31-1/4" Extended Lift: 15-1/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 7-1/2" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has claw grip for comfortable, easy cranking Easily folds away for storage Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Bolt-on mounting bracket included Specs: Application: trailer frames with a height from 2" to 4" No more than 3" wide Bracket height Retracted: 11" Extended: 21-1/2" Lift: 10-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Handle radius: 7-3/4" Lift capacity: 2,000 lbs 1-Year warranty
Bolt a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and bolt-on clip give straps, chain, and hooks a solid place to connect, so you spend less time re-hooking and repositioning tie-downs.Why Forging Matters When You Use the Same Anchor Point Again and Again Tie-down hardware sees repeat tension, road vibration, and the occasional hard cinch. A forged ring is built to take that kind of repeated use without changing shape as quickly as many stamped or cast rings do. If you haul often, that helps your anchor point stay consistent over time instead of slowly deforming and changing how your hooks sit.
Round jack has a retracted height of 15-1/2" and an extended height of 30". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Sidewind handle has zinc finish for attractive look and rust resistance Outer tube has corrosion-resistant black powder coat Inner tube and footplate have durable, rust-resistant, clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 15-1/2" Retracted 30" Extended Lift: 14-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-7/8" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 6-1/4" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a direct place to connect, so you spend less time re-hooking and repositioning tie-downs.Why Forging Matters When You Use the Same Anchor Point Again and Again Tie-down hardware sees repeat tension, road vibration, and the occasional hard cinch. A forged ring is built to take that kind of repeated use without changing shape as quickly as many stamped or cast rings do. If you haul often, that helps your anchor point stay consistent over time instead of slowly deforming and changing how your hooks sit.
This O-ring tie-down anchor is perfect for securing an ATV, generator, or other large object to the E track in your trailer or garage. It provides an attachment point for a ratchet strap, rope, chain, or bungee cord. 4,000 lbs Max load.Features: O-ring provides an anchor point for securing an ATV, generator, or other large object to your E track Perfect for attaching a ratchet strap, rope, chain, or bungee cord Spring-loaded fitting lets you easily move ring from one E track slot to another Zinc-plated steel is rust resistant Specs: Application: horizontal and vertical E track and X track Interior ring diameter: 1-7/8" Safe Working Load Limit: 1,333 lbs Maximum load (break strength): 4,000 lbs 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a solid place to connect, so you spend less time re-hooking and repositioning tie-downs.Why Forging Matters When You Cinch Down Hard and Keep Hauling Tie-down hardware sees repeat tension, road vibration, and the occasional hard cinch. A forged ring is built to take that kind of repeated use without changing shape as quickly as many stamped or cast rings do. If you haul often, that helps your anchor point stay consistent over time instead of slowly deforming and changing how your hooks sit.
Filters
