From docking lights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 11 LEDs Guaranteed circuit board protection Durable impact resistant lens Exceeds FMVSS 108 standards, IP68 rated for dust and water proofing Multiple mounting positions Wire functions: Yellow: reverse Red: stop/turn Black: running lights White: ground Specs: Measurements: 15-1/2" long; 1-1/4" tall, 1/2" deep LEDs: 3 Color: Clear lens Voltage: 9 to 14 volts DC Mounting: Surface mounted using (2) screws (screws not included - screw caps included) Connector: 9" wire Lifetime warranty TecNiq packs wide angle and bright illumination for maximum safety while retaining a sleek design.
On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and visible in any weather.Features: Diffused strobe or DOT lamp in a 6" oval form factor Grommet-mount design with dual AMP connector Meets or exceeds FMVSS 108; Amber strobe meets SAE J595 IP68 rated for dust and water incursion Sonically welded housing for a 100% sealed light Comes with lifetime warranty Wire colors: White - Ground, Red - High/Turn, Black - Low/Dim Specs: Dimensions (grommet mount): 6-1/2" L x 2-1/4" W x 1-1/2" D LED count: 32 Voltage: 9-14 VDC Current - Amber strobe's reverse: 0.575 A (± 0.085 A) Current - Amber strobe: 0.280 A Current - Stop/Turn: 0.170 A (± 0.030 A) Current - Tail: 0.075 A (± 0.012 A) Current - Reverse: 0.575 A (± 0.085 A) Plug: Dual AMP Mounting: Grommet LED color: Amber Lens color: Clear only This all new light from TecNiq combines all the features of a traditional stop, tail, turn, and reverse lamp, with the new styling of a diffused top and bottom lensing.
... This 4" round grommet lamp drops into standard holes to handle stop, turn, tail, and reverse. Sealed, UV tough, and low draw, it keeps your trailer visible and compliant from campsite to jobsite.Features: Combination Stop/Turn/Tail and Reverse LED in a 4" round package Grommet mount fits standard 4" round applications Grommet (TN43TR) is sold separately Low current draw: high-intensity stop/turn uses ~0.13 A at 12 VDC; reverse adds 0.3 A TecSeal urethane potting protects the circuit board UV-resistant, automotive-grade polycarbonate lens IP68 rated - dustproof and waterproof with hermetic seal Meets FMVSS 108 requirements for wide and narrow vehicles Reliable performance rated over 100,000 hours Wire colors: White - Ground, Red - Stop/Turn, Black - Reverse Specs: Dimensions (grommet mount): 4-5/16" diameter x 1-5/8" depth LEDs: 8 red / 2 white Voltage: 9-14 VDC Current - Stop/Turn (red): 0.11 A to 0.15 A Current - Reverse (white): 0.3 A Connector: Tri-Pole Mounting: Grommet; fits standard mounting holes Ingress rating: IP68 Compliance: FMVSS 108 Construction: TecSeal urethane potting; UV-resistant polycarbonate Service life: rated over 100,000 hours Lifetime warranty TecNiq has designed this high visibility stop, tail, turn, and reverse light to ensure you are seen in all conditions and at great distances.
7-1/2" x 3-3/8" 4-Function, waterproof light acts as brake, tail, turn, and backup light. TecNiq red and clear lens creates a solid panel of light. Mounts to trailer surface with built-in flange (hardware not included). 2-Wire pigtail.Features: Oval trailer tail light serves 4 functions Turn signal light Tail light Brake light Backup light Red and clear lens creates a solid light pattern with a smooth appearance Sealed, waterproof unit includes durable, polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Clear lens over red and white LEDs Surface-mount installation - hardware not included 4-Wire pigtail White wire for ground Yellow wire for reverse Red wire for stop/turn Black wire for tail Meets or exceeds FMVSS 108 standards Specs: Quantity: 1 tail light Dimensions: 7-1/2" long x 3-3/8" tall x 1-5/8" deep Mounting hole spacing: 7" horizontal x 2-3/4" vertical Diodes: 8 Power draw between 9 volts to 14 volts: Tail light: 0.11 amps to 0.13 amps Turn/backup light: 0.24 amps to 0.30 amps Lifetime warranty on LEDs
Bright and stylish, this X-shaped LED light will be easy for other drivers to spot as both a backup and tail light on your truck or trailer. Mounts in a cutout using a grommet (sold separately) and works with 3-prong plugs.Features: Oval reverse/tail light for trailers and trucks Certified for use as a backup light if installed as a pair X-shape design makes for a sleek, eye-catching look Red X glows for tail light Surrounding white LEDs light up for reverse Waterproof - great for boat trailers Red and white LEDs with clear lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting requires grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) PL-3 connector works with standard 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 requirements Specs: Overall dimensions (including plug): 6-1/2" long x 2-3/8" tall x 1-3/4" thick Compatible with 12V DC systems Diodes: 12 Power draw 12.8 volts: 0.381 amps Lifetime limited warranty on LEDs What Wiring Do I Need?
Backing up in the dark shouldnt feel like guesswork. This reverse light throws white light through a tinted lens that looks sharp during the day and bright at night. It snaps into a standard 6" oval grommet, seals out water and road grime.Highlights Bright, Clean Reverse Light: 8 white LEDs shine through a tinted lens for a sharp daytime look and strong visibility when backing up. Standard 6" Oval Fit: Drops into industry-standard openings with a rubber grommet for a flush, shock-damping install.
Waterproof, 2-LED marker light with chrome trim can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount. 2-Wire pigtail. P2 rated.Features: 2-Sided clearance light installs on your trailer fender Amber light faces front of trailer Red light faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-side fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lenses with red and amber LEDs Chrome-plated ABS plastic trim snaps on for a finished look Mounts on surface of trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 1-5/8" long x 13/16" tall x 1-1/4" wide Distance between mounting holes (center to center): 1-1/4" Diodes: 2 Power draw at 12.8 volts: 0.04 amps Quantity: 1 fender clearance/marker light Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
This reversible 2-LED fender light keeps replacement simple since the same symmetrical assembly works on either side of your trailer. The sonically sealed housing is submersible, while the amber/red lens puts both colors in one compact light.
Backup valve installs in trailer brake actuators with high psi ratings and wires into your tow vehicle so that the trailer brakes do not activate when you shift your tow vehicle into reverse.Features: Installs in trailer brake actuator to prevent trailer brakes from locking when in reverse Designed for use with Dexter Model 6, Model 60, Aero 7500, and newer Model 10 and Model 20 actuators For 2000 and older Model 10 actuators, an adapter (T4750200 - sold separately) may be necessary for installation
Replaces or adds an inline reverse lockout solenoid to Demco DA66B or DA70 hydraulic trailer brake actuator. Non-bypass design allows you to thread the solenoid valve into your master cylinder for a hassle-free installation.Features: Solenoid kit allows you to replace or add a reverse lockout solenoid to your Demco hydraulic trailer brake actuator Allows you to move in reverse without engaging the trailer brakes Fits Demco model DA66B and DA70 hydraulic trailer brake actuators Non-bypass configuration Allows you to install the solenoid without drilling into your master cylinder Easier to install than bypass models Includes both the solenoid cover and inline solenoid valve Made in the USA
Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.Features: Replaces reverse lockout solenoid from your Dexter/Tie Down hydraulic trailer brake actuator Can also be added onto an actuator that didin't have a reverse solenoid before Allows you to move in reverse without engaging the trailer brakes Requires only one electrical connection between the solenoid and your vehicle's backup light circuit Thread size: 3/16" IF x 1/8" MP
Install this manual reverse lockout so that you can back up your vehicle without triggering your trailer's brakes. Lockout installs on any Demco Model DA91 hydraulic brake actuator and is easily activated by hand. ... Features: Prevents trailer brakes from locking up when tow vehicle is in reverse Designed for use with Demco model DA91 trailer brake actuators Includes rust-resistant, zinc-coated steel pin and powder coated steel tab Installs quickly and easily Made in the USA Manual Reverse Lockout This manual lockout easily installs on any Demco DA91 hydraulic brake actuator so that you can back up your vehicle without your trailer's brakes locking up.
Replaces or adds an inline reverse lockout solenoid to Demco DA10 and DA91 hydraulic trailer brake actuators. Non-bypass design allows you to thread the solenoid valve into your master cylinder for a hassle-free installation.Features: Solenoid kit allows you to replace or add a reverse lockout solenoid to your Demco hydraulic trailer brake actuator Allows you to move in reverse without engaging the trailer brakes Made in the USA Fits Demco models DA10 and DA91 hydraulic trailer brake actuators Non-bypass configuration Allows you to install the solenoid without drilling into your master cylinder Easier to install than bypass models Made in the USA Includes solenoid cover, inline solenoid valve, and 10 mm flat washer Made in the USA
Backup valve installs in trailer brake actuators with high psi ratings and wires into your tow vehicle so that the trailer brakes do not activate when you shift your tow vehicle into reverse.Features: Installs in Demco trailer brake actuators to prevent trailer brakes from locking when in reverse Designed for use with Demco DA10, DA16, DA20, and DA91 hydraulic brake actuators Bypass configuration Made in the USA
Replaces or adds an inline reverse lockout solenoid to Demco DA10, DA20, DA70, and DA91 hydraulic trailer brake actuators. Non-bypass design allows you to thread the solenoid valve into your master cylinder for a hassle-free installation.Features: Solenoid allows you to replace or add a reverse lockout solenoid to your Demco hydraulic trailer brake actuator Allows you to move in reverse without engaging the trailer brakes Fits Demco models DA10, DA20, DA70, and DA91 hydraulic trailer brake actuators Non-bypass configuration Allows you to install the solenoid without drilling into your master cylinder Easier to install than bypass models
6-7/16" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). Accepts 2-prong plug. 10 White LEDs. Clear lens.
7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.
7-9/16" x 3-5/16" Oval. Waterproof trailer utility light provides bright white light where needed. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. Accepts industry standard 2-prong plug.
6-1/2" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights are installed. Smooth X-shape crosses the light face. Recessed mount with grommet (sold separately). Accepts 2-prong plug.
The electric reverse lockout on this hydraulic actuator automatically deactivates your trailer brakes when your tow vehicle is in reverse so that you can back up with ease. ... The actuator telescopes, applying force to its master cylinder, which in turn supplies the necessary hydraulic pressure to engage the trailer's brakes. Electric Reverse Lockout The electric reverse lockout on this trailer brake actuator is automatically activated when you shift your tow vehicle into reverse.
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. ... These brakes are needed if your actuator does not have a reverse lockout, which is a mechanism that ensures that the actuator does not activate when your rig moves in reverse. Each of these free-backing hydraulic brake assemblies has a fall-away shoe, which provides full braking when your trailer is moving forward, but supplies only limited friction when the trailer is moving in reverse.
Free-backing, driver's-side and passenger's-side drum brakes won't engage when you reverse, even if your actuator is activated. Automotive-grade friction pads and e-coated backing plates are long-lasting. Fit 14" to 15" wheels.These brakes are needed if your actuator does not have a reverse lockout, which is a mechanism that ensures that the actuator does not activate when your rig moves in reverse. Each of these free-backing hydraulic brake assemblies has a fall-away shoe, which provides full braking when your trailer is moving forward, but supplies only limited friction when the trailer is moving in reverse.
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. ... These brakes are needed if your actuator does not have a reverse lockout, which is a mechanism that ensures that the actuator does not activate when your rig moves in reverse. Each of these free-backing hydraulic brake assemblies has a fall-away shoe, which provides full braking when your trailer is moving forward, but supplies only limited friction when the trailer is moving in reverse.
Filters
