3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailerlight serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailerlight serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
6-1/16" x 3-5/8" Rectangle. Waterproof trailerlight acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Mounts on surface of trailer - hardware included. 3-Wire pigtail. 18 LEDs.This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
3-3/4" x 2-1/16" Rectangle. Incandescent trailerlight serves as either a side marker or clearance light. Built-in reflex reflector. Durable ABS base. Ear mount on 3-1/4" centers. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailerlight serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
2-3/4" x 1-3/8" Rectangle. Low-profile LED trailerlight with chrome-plated polycarbonate housing illuminates your license plate. Surface mount with foam gasket - hardware included. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Snap-on chrome-plated polycarbonate housing Clear lens over white LEDs Surface mount with foam gasket - hardware included 2-Wire design includes power lead and ground wire DOT approved when properly mounted Requires single light mounted at trailer center, or 2 lights mounted on each side Specs: Quantity: 1 license plate light Overall dimensions: 2-3/4" long x 1-3/8" wide x 1" deep Distance between mounting holes (center on center): 2" Diodes: 2 Power draw at 12.8V: 0.027 amps Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # DL2020 Grote # 61501 Peterson # M434
We think the waterproof seal and potting on this tail light makes it perfect for boat trailers or any light-duty trailer that may be exposed to water - which is all of them. It displays every signal you need: stop, tail, turn, brake, and more.Features: LED tail light provides 8 functions Stop, tail, turn, clearance, side marker, side reflector, rear reflector, and license plate Truly submersible TecSeal urethane potting protects circuit board from vibration and moisture Sonic-welded case IP68 Rating Red impact-resistant lens over red LEDs 1 White LED for license plate More efficient and durable than incandescent bulbs Direct replacement for standard trailerlight Requires (2) 1/4-20 carriage bolts (sold separately) 9" pigtail wires directly into your trailer's wiring DOT compliant Meets FMVSS 108 requirements for narrow and wide vehicles Specs: Configuration: driver's side Passenger side: TN92XR (sold separately) Dimensions: 8" long x 2-7/8" tall x 2-7/8" deep Total diodes: 8 Power draw between 9-14V: Stop: +0.11- 0.15 amps Tail/turn: 0.14- 0.20 amps
2-1/2" x 1-3/16" x 7/8". Waterproof, incandescent trailerlight functions as a clearance or side marker trailerlight. Durable polycarbonate lens. Multiple mounting and wiring options (sold separately). ... Features: Rectangular trailerlight can function as both a clearance light and a side marker light when properly mounted Sonically sealed, polycarbonate housing and lens are waterproof Incandescent bulb provides dependable light Durable polycarbonate housing and lens Amber lens over incandescent bulb Compatible with 12V DC systems Multiple mounting options Surface mounts with base (A91BB or A91CB - sold separately) Flush mount with grommet (A91GB - sold separately) Accepts standard 2-prong plug (A46PB or A86PB - sold separately) Also accepts single wire pigtail (A91LW - sold separately) PC rated Specs: Quantity: 1 clearance/marker light Overall dimensions: 2-1/2" long x 1-3/16" wide x 7/8" deep Bulb type: incandescent Power draw at 12.8V: 0.2 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # SE1225A Wesbar # 203367 Truck Lite # 15200Y Grote # 46413 Peterson # M150A Bargman # 40-37-002 Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
We think the waterproof seal and potting on this tail light makes it perfect for boat trailers or any light-duty trailer that may be exposed to water - which is all of them. It displays every signal you need: stop, tail, turn, brake, and more.Features: LED tail light provides 7 functions Stop, tail, turn, clearance, side marker, side reflector, and rear reflector Truly submersible TecSeal urethane potting protects circuit board from vibration and moisture Sonic-welded case IP68 Rating Red impact-resistant lens over red LEDs More efficient and durable than incandescent bulbs Direct replacement for standard trailerlight Requires (2) 1/4-20 carriage bolts (sold separately) 9" pigtail wires directly into your trailer's wiring DOT compliant Meets FMVSS 108 requirements for narrow and wide vehicles Specs: Configuration: passenger side Driver side: TN32XR (sold separately) Dimensions: 8" long x 2-7/8" tall x 2-7/8" deep IP Rating: 68 Total diodes: 7 Power draw between 9-14V: Stop: +0.11- 0.15 amps Tail/turn: 0.06- 0.09 amps
4" x 1-1/2". Incandescent trailerlight serves as either a side marker light or clearance light when properly mounted. Built-in reflex reflector. Snap-on lens. Surface mount to trailer - hardware not included. 2-Wire design. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
5-5/16" x 3-7/16". Waterproof, incandescent tail light serves as a stop, tail, and turn signal. Shock-proof socket protects bulb against damage. Recessed mount with grommet (not included). ... Features: Rectangular incandescent trailerlight serves 3 functions Stop, turn, and tail Sonically sealed, waterproof housing and lens unit is submersible Incandescent bulb can be easily replaced Shock-proof socket protects bulb against damage Durable polycarbonate snap-on lens and housing Compatible with 12V DC systems Recessed mount with grommet (A33GB - sold separately) Accepts industry standard 3-prong plug (A45PB or A47PB - sold separately) Specs: 5-5/16" long x 3-7/16" tall x 1-15/16" thick Bulb type: incandescent Power draw at 12.8V: Stop/turn: 2.19 amps Tail: 0.49 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # SE4060R Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-9/16" x 1-1/4" Rectangle. Incandescent trailerlight illuminates your license plate when properly mounted. Durable chrome-plated housing. Gasket helps create a weathertight seal. ... These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
3-15/16" x 2-5/16" Rectangle. Low-profile LED trailerlight functions as a side marker or clearance light when properly mounted. Built-in reflex reflector. Surface mount to trailer - hardware not included. 1-Wire design. ... Surface-Mount Light Surface-mount trailerlights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring.
2-1/2" x 1-3/16" Rectangle. Waterproof, incandescent trailerlight illuminates your license plate. Bulb can be easily replaced. Multiple mounting options. ... Features: Compact incandescent light illuminates your trailer's license plate Sonically sealed, waterproof unit is submersible Incandescent bulb can be easily replaced Durable polycarbonate lens and housing Clear lens over incandescent bulb Compatible with 12V DC systems Multiple mounting options Flush mount with grommet (A91GB - sold separately) Surface mount with bracket (A91BB - sold separately) Accepts industry standard 2-prong plug (A46PB or A86PB - sold separately) DOT compliant Specs: Dimensions: 2-1/2" wide x 1-3/16" tall x 7/8" long Bulb type: 194 Power draw at 12.8V: 0.2 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # SE1225L/R Wesbar # 108288 Truck Lite # 15200C Grote # 45821 Peterson # 150C Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-1/2" x 1-1/4" Rectangle. Waterproof LED trailerlight illuminates your license plate. Requires mounting bracket or grommet (sold separately) for installation. 2-Wire pigtail with power and ground wires. ... Features: Rectangular light illuminates your trailer's license plate Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Clear lens Requires mounting bracket or grommet (sold separately) for installation 2-Wire pigtail with power and ground wires Specs: Dimensions: 2-1/2" long x 1-1/4" wide x 13/16" deep Diodes: 2 Power draw at 12.8 volts: 0.027 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
3-15/16" x 2-5/16" Rectangle. Low-profile LED trailerlight functions as a side marker or clearance light when properly mounted. Built-in reflex reflector. Surface mount to trailer - hardware not included. 1-Wire design. ... Surface-Mount Light Surface-mount trailerlights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailerlight serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
5-5/16" x 3-7/16" Rectangle. Waterproof, incandescent light provides backup light function for trucks or trailers. Shock-proof socket protects bulb. Flush mount with grommet (not included). ... Specs: Dimensions: 5-5/16" long x 3-7/16" tall x 1-15/16" thick Bulb type: incandescent Power draw at 12.8V: 1.6 amps 3-Year warranty Rectangular backup light for trailers and utility trucks Sonically sealed, waterproof housing and lens unit is submersible Shock-proof socket protects bulb against damage Incandescent bulb can be easily replaced Durable polycarbonate housing and lens Clear lens over incandescent bulb Compatible with 12V DC systems Flush mount to trailer with grommet (A33GB - sold separately) Accepts industry standard 2-prong plug (A45CB or A49PB - sold separately) Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4" x 1-1/2" Rectangle. Waterproof, LED trailerlight serves as either a clearance or side marker light. Built-in reflex reflector. Durable ABS housing. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
4" x 2" Rectangle. Incandescent trailerlight serves as either a side marker light or a clearance light. Amber acrylic lens with reflex reflector. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
2-5/8" x 1-9/16" Rectangle. Incandescent trailerlight with chrome-plated housing illuminates your license plate. Bulb can be easily replaced. Stud mount to trailer. 1-Wire design. (1) 194 Bulb.Features: Compact incandescent light illuminates your trailer's license plate Incandescent bulb can be easily replaced Snap-on chrome housing Durable polycarbonate housing and lens Clear lens over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included studs Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 2-5/8" wide x 1-9/16" tall x 2-3/16" long Distance between mounting studs (center on center): 1-3/4" Bulb type: 194 Power draw at 12.8V: 0.2 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Peterson # 436SX
3-7/8" x 1-1/4" Rectangle. Waterproof LED trailerlight illuminates an exterior area with bright light. Durable polycarbonate housing and lens. Surface mounts with bracket (sold separately). ... Features: Waterproof LED trailerlight illuminates an exterior area with bright white light Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear lens over white LEDs Durable polycarbonate housing and lens Surface mounts with mounting bracket (sold separately) Mounts on 3" centers Accepts industry standard 1-prong or 2-prong plug (sold separately) Specs: Overall dimensions: 4" long x 1-1/4" wide x 1" deep Distance between mounting holes (center on center): 3" Diodes: 6 Power draw at 12.8V: 0.048 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
3-5/16" x 1" Rectangle. Incandescent trailerlight serves as a clearance, side marker, or identification light. Durable steel base with snap-lock lens. ... Surface-Mount Light Surface-mount trailerlights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring.
4-9/16" x 2-1/2" Rectangle. Incandescent trailerlight provides backup light function. Pillow optics lens allows maximum light output. Screw-on lens. Surface mount - hardware not included. 1-Wire design. (1) 1141 bulb.These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
Filters
