This fork-mount block bolts onto almost any flat surface and provides a mounting point for 1 bike with a 9-mm quick-release skewer, a 12-mm thru-axle fork, or a 15-mm thru-axle fork. ... Features: Fork-mount bike rack provides simple option for carrying 1 bike Versatile fork block works with bikes that have a 9-mm x 100-mm quick-release skewers and 12-mm x 100 mm or 15-mm x 110-mm thru-axle forks Accepts 20-mm thru-axle forks with an adapter tube (S64715 - sold separately) Accommodates bikes with standard brakes or disc brakes Can be used to carry an additional bike on your Swagman Patrol truck-bed bike carrier (S64701 - sold separately) Lightweight, durable aluminum construction is rustproof Easy installation to almost any flat surface with included hardware Includes anti-theft bolts and T-slot wedges for use with Swagman Patrol and other channel-mount applications Specs: Capacity: 1 bike Skewer diameter: 9 mm Weight capacity: 45 lbs Limited lifetime warranty
These quick-release rooftop tent brackets let you easily mount and remove a tent on your Front Runner platform rack. Latches on brackets quickly secure and release - no tools needed. ... Features: Quick-release brackets make it easy to mount and remove your rooftop tent from your Front Runner platform rack Easy installation with included hardware Base brackets with latches install to top channels in your Front Runner platform rack Catches and bobbin bolts secure to your rooftop tent's base channels Align bobbin bolts on the tent to the base brackets on the platform, slide into place, and close the latches to secure Works with small accessory lock (sold separately) to deter theft Compact brackets can be left on rack and tent base when not in use Black powder-coated steel brackets and stainless steel latches resists corrosion Specs: Application: Front Runner Slimline II platform racks, Slimsport platform racks, and Slimpro van racks Quantity: 6 brackets Assembled bracket dimensions: 5-3/16" long x 5-5/8" wide x 2-3/8" tall Weight: 21.8 lbs 3-Year warranty Notes: Review installation guide to verify if your tent is compatible.
Switch your Thule Chariot bike trailer quickly and easily between 2 bikes. Install this axle-mount ezHitch on a second bike so you can move your bike trailer to another bike at a moment's notice. For solid and quick-release bike axles.Installing a second hitch cup on another bike lets two people share the pulling duties when they're out for a bike ride. The skewer in this kit replaces your existing quick-release skewer so you can mount the included hitch cup. If you have a solid axle, you will attach the axle-mount hitch cup on your bike and use your existing axle nut to secure it.
Lightweight, fork-mount rack lets you carry a bike with a standard quick-release axle on your Front Runner platform rack. The 9-mm skewer secures the front fork of your bike to the rack, and a ratcheting strap secures your rear wheel to the cradle.Features: Fork-mount carrier lets you transport 1 bike on your Front Runner platform rack 9-mm Quick-release skewer fits standard fork dropouts Quick-release ratchet strap secures rear wheel to cradle Easy installation into platform channels Adapter kit (sold separately) lets you carry a bike with a 15-mm x 100-mm or 20-mm x 110-mm thru axle, or 15-mm x 110-mm Boost hub Cable lock (sold separately) secures bike to rack Durable aluminum and steel construction with black powder coat is rust resistant Specs: Application: Front Runner platform racks (over 53" long) Capacity: 1 bicycle Weight capacity: 55 lbs Maximum tire width: 4.5" Dimensions: Fork mount: 2-3/4" long x 6" wide x 4-1/2" tall Rear wheel holder: 9-1/8" long x 6-7/8" wide x 3-1/4" tall Weight: 3.5 lbs 3-Year warranty
Dummy axle lets you transport 1 bike with a standard fork mount on the RockyMounts DriveShaft HM thru-axle bike rack for truck beds. Has 9-mm skewer for bikes with quick-release front wheels. Also serves as replacement axle for DriveShaft SD.Features: 9-mm Skewer lets you transport a bike with a thru axle on RockyMounts DriveShaft HM (RKY1084 - sold separately) Works only for bikes with standard fork mounts and quick-release front wheels Replaces skewer on DriveShaft SD (RKY1085 - sold separately) Quick-release handle lets you load and unload bike quickly Chromoly-wrapped stainless steel and durable plastic construction Lifetime warranty
Universal QR skewer lets you carry a bike with a 9-mm quick-release skewer on a fork-mount-style bike carrier. Lockable with Same Key System - lock core sold separately. Durable stainless steel construction.Features: Universal QR skewer lets you carry a bike with a 9-mm quick-release skewer on a fork-mount-style bike carrier Compatible with 9-mm x 100-mm bike axles Lockable with Yakima SKS (Same Key System) lock core (Y07202 - sold separately) SKS Cores can be changed out to make all your Yakima locks keyed alike Durable stainless steel construction resists corrosion Limited lifetime warranty
These quick-release awning brackets let you easily mount and remove an awning on your Front Runner Slimline II platform rack. Built-in latches quickly secure and release - no tools needed. ... Features: Quick-release brackets make it easy to mount and remove your awning from your Front Runner Slimline II platform rack Works with many popular awning brands Use side mount accessory bracket (FR95ZV - sold separately) to install on Front Runner Slimsport platform racks and Front Runner Slimpro van racks Easy installation with included hardware Base brackets with latches install to side and top channels in your Front Runner platform rack Catches and bobbin bolts secure to your awning's mounting channels Align bobbin bolts on the awning to the base brackets on the platform, slide into place, and close the latches to secure Works with small accessory lock (sold separately) to deter theft Compact brackets can be left on rack and awning when not in use Included wall brackets let you easily store your awning in your garage Black powder-coated steel brackets and stainless steel latches resists corrosion Specs: Application: Front Runner Slimline II platform racks Quantity: 2 brackets Weight capacity: 44.1 lbs Assembled bracket dimensions: 6-3/8" long x 4-1/8" wide x 3-7/8" tall Overall dimensions: 5-1/4" tall x 2-3/8" wide Depth when mounted to wall: 1-5/8" Distance between mounting holes (center to center): 4-1/8" 3-Year warranty Note: Not compatible with 270-degree awnings.
This simple, affordable fork-mount bike rack bolts to almost any flat surface to provide a mounting point for 1 bike. The fork block works with fat bike forks that have 9-mm quick-release skewers. ... Features: Fork-mount bike rack provides simple, economically priced option for carrying 1 fat bike Works only with fat bikes that have 9-mm, quick-release front wheel skewers Accommodates bikes with standard or disc brakes Versatile fork block mounts to almost any flat surface, such as a truck bed, trailer, or cargo carrier Base has 2 holes for easy installation Hardware not included - 1/4" or 6-mm bolts or screws with washers and lock washers recommended Drilling template included Sturdy steel construction with black powder coat finish ensures durability and rust resistance Specs: Carrying capacity: 1 bicycle Lifetime warranty
9-mm quick-release skewer works with RockyMounts HotRod and SwitchHitter bike racks. Allows you to transport a bike with a 9-mm QR skewer on your bicycle carrier. Includes (1) 9-mm quick-release skewer and 1 sleeve.
If more than 1 bike is in the mix, this axle mount plate with quickrelease skewer keeps things simple. It lets you attach your compatible child carrier to a second bike, so switching between riders takes seconds.Features: Axle mount plate with quickrelease skewer allows your compatible child carrier to connect to a second bike Makes switching the trailer between bikes fast and straightforward Includes extra-long quickrelease skewer and hitch plate Compatible with Thule Chariot Cross 2 and Thule Chariot Sport 2 child bike trailers
Quickly and easily convert your B&W Turnoverball gooseneck hitch to a sturdy 5th-wheel trailer hitch. Wide-stance base offers fore/aft and height adjustments to fit your application. Dual-jaw hitch removes without a trace for full bed access.Non-Binding Latch Handle The dual jaw on the Companion is operated by a simple-to-use cam-action handle. This handle allows you to quickly and easily release the jaws on the hitch, even if you are on uneven terrain. If any binding does occur between your truck and trailer, the jaws may remain closed after you move the handle to the open position.
Get safe, smooth braking for your towed car with this truly proportional braking system. Car slows perfectly in sync with your RV. Installs permanently so you can just plug in and go. Low-profile design keeps it out of sight and out of the way.You'll then route an air hose to the quick-connector on the back of your motorhome. Quick Tip: The coach air connection assembly needs to be mounted in a location where the air lines will not be exposed to direct heat sources or moving parts; in front of the rear axle is often a good location.
This heavy-duty tow bar is easy to maneuver, with a swivel head joint that lets the arms twist left and right. Non-binding levers let you disconnect at the campsite, even on rough terrain. Extra-long arms help you make tight turns.Simply press down on the Avail's non-binding levers to disengage the internal latches in the arms. This releases the pent-up pressure so you can unhook and get on with your adventure. Secure Triple-Lug Connection Blue Ox tow bars have triple-lug brackets to create an extra-secure connection to the base plate.
Specially designed to attach to the receivers in your factory 5th-wheel towing prep package, the Companion OEM features a dual jaw for excellent jaw-to-king-pin contact and a cam-action handle for simple release. Easily remove for full bed access.Features: 5th-Wheel hitch mounts in your truck bed so you can tow your 5th-wheel trailer Works with factory-installed 5th-wheel towing prep package from Chevy/GMC Rail-free design allows for full access to truck bed when hitch is removed 1" Thick dual jaws provide 360-degree jaw-to-king-pin contact Less rattle and more security than slide-bar jaws Cam-action latching handle helps prevent binding Simple to release, even on unlevel terrain Lockable to secure trailer to hitch - padlock sold separately Fully articulating head eases hookup and helps to limit chucking Pivots front-to-back and side-to-side Improved cab clearance achieved with 2" of front-to-back adjustment Attach pivot arms to base in desired position fore or aft 3 Height settings to fit your application Quiet, rattle-free ride with polyurethane bushings Quick, simple installation Drops into the 4 receiver pucks that are built into your factory underbed rails Gray powder coated steel is corrosion resistant Made in the USA Specs: Application: 2020 and newer Chevy/GMC trucks with factory-installed towing prep package Gross towing weight: 20,000 lbs Tongue Weight: 5,000 lbs Hitch height: 16-3/4" - 18-3/4" Limited lifetime warranty Quiet, Secure Ride The 1" thick jaw on the Companion OEM is precision machined to provide a tight, sturdy connection.
Simple yet tough, this tow bar is engineered to be easy to hook up. The extra-long arms help you make tight turns. Stores conveniently on the back of your RV: push the arms up and the holding latch will automatically lock into place.Then, when you've reached your destination and you're ready to unhook your vehicle, press the Autowlok release button on the arm of the Falcon to disengage the internal spring-loaded pin. With the pins on both arms released, the arms will be able to telescope again, making it easier to disconnect.
Get safe, smooth braking for your towed car with this truly proportional braking system. Installs permanently so you can just plug and go. Low-profile design keeps it out of sight and out of the way. Includes convenient wireless braking monitor.You'll then route an air hose to the quick-connector on the back of your motorhome. Quick Tip: The coach air connection assembly needs to be mounted in a location where the air lines will not be exposed to direct heat sources or moving parts; in front of the rear axle is often a good location.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. Topwind handle allows for an additional 15-1/2" of screw travel.The result is a base that is far sturdier and more stable than that of a standard drop leg jack. On a standard drop leg jack, the release pin is tucked away under the trailer frame. The release pin on this jack is conveniently located right above the mount for easy access.
Use your Rhino-Rack Aero accessories on your vehicle with factory roof-rack tracks. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.Features: Adjustable roof-rack lets you carry gear on your vehicle's factory roof-rack tracks 4 QuickMount legs mount in the channels of tracks to create mounting points for crossbars Durable, glass-reinforced nylon construction Quick-release trigger system allows for easy, tool-free installation Squeeze internal triggers to release legs from bases Slide triggers apart to secure legs to bases Bases remain mounted to tracks Locks in covers let you secure the system to your vehicle Pivoting bases offer 33 degrees of adjustment to help level crossbars Precision-molded inserts cover bases when the legs are removed 2 Vortex Aero black, elliptical crossbars hold ladder racks, conduit cases and other work accessories Bars mount to roof-rack legs using built-in channels on bottoms of bars Lightweight, structural-grade, extruded aluminum construction for strength, durability and maximum carrying capability Built-in C-channel on top of each bar lets you mount Rhino-Rack accessories and carriers Rubber strips in the channels help to cushion load and provide slip resistance Can be cut to accommodate track-mounted accessories and carriers Specs: Weight capacity: 220 lbs Always observe your vehicle's maximum roof load capacity Crossbar dimensions: 54" long x 3-1/2" wide x 1-1/2" tall Leg height: 3" Limited lifetime warranty The bases of these Rhino Rack legs easily mount into Thule or Yakima roof-rack tracks.
Specially designed to attach to the receivers in your factory 5th-wheel towing prep package, the slider base on this hitch helps eliminate clearance concerns during slow-speed turns. Dual-jaw hitch removes without a trace for full bed access.Features: 5th-Wheel hitch mounts in your truck bed so you can tow your 5th-wheel trailer Works with factory-installed 5th-wheel towing prep package from Chevy/GMC Built-in slider provides clearance required for your short-bed pickup to turn safely at slow speeds Rail-free design allows for full access to truck bed when hitch is removed 1" Thick dual jaws provide 360-degree jaw-to-king-pin contact Less rattle and more security than slide-bar jaws Cam-action latching handle helps prevent binding Simple to release, even on unlevel terrain Lockable to secure trailer to hitch - padlock sold separately Fully articulating head eases hookup and helps to limit chucking Pivots front-to-back and side-to-side 3 Height settings to fit your application Quiet, rattle-free ride with polyurethane bushings Quick, simple installation Drops into the 4 receiver pucks that are built into your factory underbed rails Gray powder coated steel is corrosion resistant Made in the USA Specs: Gross towing weight: 20,000 lbs Vertical load limit: 5,000 lbs Hitch height: 17" - 19" Travel: 12" front to back Slider footprint: 36" long x 32-3/8" wide Limited lifetime warranty Quiet, Secure Ride The 1" thick jaw on the Companion is precision machined to provide a tight, sturdy connection.
Specially designed to attach to the receivers in your factory 5th-wheel towing prep package, the Companion OEM features a dual jaw for excellent jaw-to-king-pin contact and a cam-action handle for simple release. Easily remove for full bed access.Features: 5th-Wheel hitch mounts in your truck bed so you can tow your 5th-wheel trailer Works with factory-installed 5th-wheel towing prep package from Ford Rail-free design allows for full access to truck bed when hitch is removed 1" Thick dual jaws provide 360-degree jaw-to-king-pin contact Less rattle and more security than slide-bar jaws Cam-action latching handle helps prevent binding Simple to release, even on unlevel terrain Lockable to secure trailer to hitch - padlock sold separately Fully articulating head eases hookup and helps to limit chucking Pivots front-to-back and side-to-side Improved cab clearance achieved with 2" of front-to-back adjustment Attach pivot arms to base in desired position fore or aft 3 Height settings to fit your application Quiet, rattle-free ride with polyurethane bushings Quick, simple installation Drops into the 4 receiver pucks that are built into your factory underbed rails Gray powder coated steel is corrosion resistant Made in the USA Specs: Application: 2011 and newer Ford Super Duty trucks with factory-installed towing prep package Gross towing weight: 25,000 lbs Vertical load limit: 6,250 lbs Hitch height: 16-3/4" - 18-3/4" Limited lifetime warranty Quiet, Secure Ride The 1" thick jaw on the Companion OEM is precision machined to provide a tight, sturdy connection.
This simple, affordable fork-mount bike rack bolts to almost any flat surface and provides a mounting point for 1 bike. The fork block works with bikes that have 9-mm, quick-release skewers. ... Features: Fork-mount bike rack provides simple, economically priced option for carrying 1 bike Works only with bikes that have quick-release, 9-mm front wheel skewers Accommodates bikes with standard or disc brakes Versatile fork block mounts to almost any flat surface, such as a truck bed, trailer, or cargo carrier Base has 2 holes for easy installation Hardware not included - 1/4" or 6-mm bolts or screws with washers and lock washers recommended Drilling template included Sturdy steel construction with black powder coat finish ensures durability and rust resistance Specs: Carrying capacity: 1 bicycle Mounting hole spacing (center to center): 2-3/4" Lifetime warranty
Carry a spare tire for your truck, van, or SUV while still using your hitch for mounting accessories. The sturdy Roadmaster spare tire carrier holds all wheels with a lug nut circle up to 7", including dually and deep dish style.Features: Sturdy spare tire carrier holds a spare tire for your truck, van, or SUV 2" Receiver hitch allows you to simultaneously connect a tow bar, bike rack, or other hitch-mounted accessory Carrier designed to work with dually and deep dish offset style wheels Carrier pivots down to the ground for ease of use and access to rear compartments or engine Spring-loaded handle makes it easy to pivot carrier down and secure it back in place 2 Separate pin holes let you change the length of the shank Built-in safety cable connection tabs allow for quick hook-up and release Anti-rattle hitch pin secures carrier to RV's hitch and helps to eliminate rattle and play in the connection Black powder coated steel is durable and corrosion resistant Specs: Application: 2" x 2" trailer hitch receivers Maximum 10" spacing between rear of RV and hitch pin hole Fits 16" - 24-1/2" wheels Compatible with all wheel bolt hole patterns Receiver opening of carrier: 2" x 2" Maximum flat towing capacity: 10,000 lbs Maximum tongue weight : 400 lbs Overall dimensions: Extended: 70-1/2" tall from inside top edge of receiver tube on RV to top of handle Retracted: 42-1/2" tall from inside top edge of receiver tube on RV to top of handle Limited Lifetime Warranty Notes: This Roadmaster spare tire carrier is only to be used for flat towing a vehicle or carrying a hitch-mounted accessory, such as a bike rack or a cargo carrier.
Specially designed to attach to the receivers in your factory 5th-wheel towing prep package, the slider base on this hitch helps eliminate clearance concerns during slow-speed turns. Dual-jaw hitch removes without a trace for full bed access.Features: 5th-Wheel hitch mounts in your truck bed so you can tow your 5th-wheel trailer Works with factory-installed 5th-wheel towing prep package from Ford Built-in slider provides clearance required for your short-bed pickup to turn safely at slow speeds Rail-free design allows for full access to truck bed when hitch is removed 1" Thick dual jaws provide 360-degree jaw-to-king-pin contact Less rattle and more security than slide-bar jaws Cam-action latching handle helps prevent binding Simple to release, even on unlevel terrain Lockable to secure trailer to hitch - padlock sold separately Fully articulating head eases hookup and helps to limit chucking Pivots front-to-back and side-to-side 3 Height settings to fit your application Quiet, rattle-free ride with polyurethane bushings Quick, simple installation Drops into the 4 receiver pucks that are built into your factory underbed rails Gray powder coated steel is corrosion resistant Made in the USA Specs: Application: 2011 and newer Ford Super Duty trucks with factory-installed towing prep package Gross towing weight: 20,000 lbs Vertical load limit: 5,000 lbs Hitch height: 17" - 19" Travel: 12" front to back Slider footprint: 36" long x 32-5/16" wide Limited lifetime warranty Notes: Due to the size of this item, it ships via freight.
Specially designed to attach to the receivers in your factory 5th-wheel towing prep package, the Companion OEM features a dual jaw for excellent jaw-to-king-pin contact and a cam-action handle for simple release. Easily remove for full bed access.Features: 5th-Wheel hitch mounts in your truck bed so you can tow your 5th-wheel trailer Works with factory-installed 5th-wheel towing prep package from Ram Rail-free design allows for full access to truck bed when hitch is removed 1" Thick dual jaws provide 360-degree jaw-to-king-pin contact Less rattle and more security than slide-bar jaws Cam-action latching handle helps prevent binding Simple to release, even on unlevel terrain Lockable to secure trailer to hitch - padlock sold separately Fully articulating head eases hookup and helps to limit chucking Pivots front-to-back and side-to-side Improved cab clearance achieved with 6" of front-to-back adjustment Attach pivot arms to base in desired position fore or aft 3 Height settings to fit your application Quiet, rattle-free ride with polyurethane bushings Quick, simple installation Drops into the 4 receiver pucks that are built into your factory underbed rails Gray powder coated steel is corrosion resistant Made in the USA Specs: Application: 2013 and newer Ram trucks with factory-installed towing prep package Gross towing weight: 25,000 lbs Vertical load limit: 6,250 lbs Hitch height: 17" - 19" Limited lifetime warranty Quiet, Secure Ride The 1" thick jaw on the Companion OEM is precision machined to provide a tight, sturdy connection.
Filters
