This Dutton-Lainson sidewind swivel jack is a back saver when hitching and unhitching loaded trailers. The heavy-duty D-L tongue jack reduces the effort required to maneuver a trailer into hitching position or to remove the trailer from a vehicle.
This Dutton-Lainson sidewind swivel jack is a back saver when it comes to hitching and unhitching trailers. Silver finish.Features: Easy to install- bolt on mounting Tongue jack can be mounted in a variety of ways on various sized trailer tongues Smooth operating Enclosed outer tube retards sand and dirt from contacting the miter gears and heavy-duty Acme screw Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating All mounting hardware is included 2-1/2" Diameter mounting hole in swivel bracket fits most other brands of mounting hardware Floating miter gears allow for proper clearance and easier operation Maximum maneuverability from the offset swivel caster assembly Ergonomic hand grip with textured surface Made from heavy-gauge steel for strength and durability Silver finish Made in the USA Specs: Application: square trailer tongues up to 3" x 5" Bracket height: 24" Retracted 33" Extended Lift: 10" Clearance: 10-1/2" from mounting bracket to top of jack Inner tube diameter: 1-3/4" Outer tube diameter: 2" Pullpin diameter: 1/2" Wheel diameter: 6" Lift capacity: 1,000 lbs 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This spring-loaded pullpin fits your etrailer or Ram 5th-wheel landing gear jack. Replaces the standard pullpin on your jack.Features: Replaces the standard spring pullpin from your etrailer or Ram 5th-wheel landing gear Pin diameter: 3/8"
This extended-length, spring-loaded pullpin fits your etrailer or Ram 5th-wheel landing gear jack. Replaces the standard pullpin on your jack and offers an extra 4" in length.Features: Replaces the standard spring pullpin from your etrailer or Ram 5th-wheel landing gear Extended pullpin is an additional 4" long
Replaces the pullpin used to support the Holdup +2 2-bike add-on (Y02446) when installed on your Yakima HoldUp bike rack (Y02443-2). Includes pullpin with lanyard and push pin.Features: Replaces the pullpin used to support the Holdup +2 2-bike add-on (Y02446) when installed on your Yakima HoldUp bike rack (Y02443-2) Includes pullpin with lanyard and push pin Fits: Yakima +2 2-bike add-on for HoldUp bike racks (Y02446) Yakima HoldUp bike rack for 4 bikes: Y02443-2
Replacement pullpin fits your etrailer or Ram pipe-mount swivel jack. Includes 5/8" pullpin and chain. Designed for use with TJP-5001S, TJP-5002S, TJP-7001, and TJP-7001S Series jacks.Features: Pullpin assembly replaces the pullpin for your etrailer or Ram pipe-mount swivel jack Designed for use with TJP-5001S, TJP-5002S, TJP-7001, and TJP-7001S Series jacks Includes pullpin and chain Pin diameter: 5/8"
... Pull this gray pin on the stinger of the rack to engage the tilt mechanism on your rack.Features: Replace the secondary pullpin assembly for your Yakima Two Timer (Y02468), Four Timer (Y02469), OnRamp (8002706 or 8002707), or OnRamp LX (8002756 or 8002757) bike rack Pull this gray pin on the stinger of your rack to engage the tilting mechanism on your rack Fits: Yakima TwoTimer: Y02468 Yakima FourTimer: Y02469 Yakima OnRamp: 8002706 and 8002707 Yakima OnRamp LX: 8002756 and 8002757
Replaces the inner tube, drop leg, foot, and pullpin for Curt heavy-duty, direct-weld square jack (28512).Features: Replaces the inner tube, drop leg, foot, and pullpin for Curt heavy-duty, direct-weld square jack with 10,000-lb lift capacity (28512) Specs: Inner tube dimensions: 3-1/2" x 3-1/2" Footplate dimensions: 8-1/4" x 8" Drop leg length: 14-1/2"
Replaces the pullpin that operates the tilt function on your gray Yakima HoldUp bike rack (02433, Y02434, Y02433-02435, or Y02435). Includes pin, clip, lanyard, and snap rivet.Features: Replaces the pullpin that operates the tilt function on your gray Yakima HoldUp bike rack (02433, Y02434, Y02433-02435, or Y02435) Includes pin, clip, lanyard, and snap rivet Fits: Yakima HoldUp bike racks: Y02433, Y02434, Y02433-02435, and Y02435
Pullpins can be used in place of cage pins to simplify drop-leg adjustment on your Stromberg Carlson manual (LG-183708) or electric (LG-1, LG-2, LG-3, and LG-4) landing gear. ... Features: Spring-loaded pullpins let you upgrade from cage pins to make adjusting the drop legs on your landing gear a snap Single-handed operation - pullpin to release, let go to engage Simple installation - clamps around jack leg No more lost pins - pullpins stay connected to jack when not in use Designed for use with Stromberg Carlson manual landing gear (LG-183708) or electric landing gear (LG-1, LG-2, LG-3, and LG-4) Also works with other brands of landing gear that have 2-1/4" square leg and a 7/16" diameter pin hole Pullpins will extend 5-1/2" from the leg when installed Durable steel construction Specs: Quantity: 2 drop-leg pullpinsPin diameter: 3/8"
Replaces the spring pin with lanyard for your Yakima SwingDaddy bike rack (8002464).Features: Replaces the spring pin with lanyard for your Yakima SwingDaddy bike rack (8002464) Fits: Yakima SwingDaddy bike rack: 8002464
Weld this female pipe mount to your trailer's frame to provide the mounting point for the male pipe on your swivel jack. Fits 3-1/4" male pipes with a 7/8" pin hole.Features: Provides trailer-side attachment point for your pipe-mount swivel jack Welds onto your trailer frame to provide the attachment point for your pipe-mount swivel jack Allows you to swing your jack down for use and up for travel Female pipe pairs with male mount on your jack Specs: Fits: 3-1/4" male pipe mount Diameter: Outer: 4" Inner: 3-1/4" Pin hole diameter: 7/8" Length: Longer edge to center of pin hole: 1-5/8" Shorter edge to center of pin hole: 1-1/4" Overall: 2-7/8"
These quick release pullpins are designed to allow for easy and fast adjustment to your landing gear legs. They are easier to remove than standard landing gear pins with their spring-loading action, even after being exposed to the elements.
Replacement pullpin fits your etrailer or Ram pipe-mount swivel jack. Includes 9/16" pullpin and chain. Designed for use with TJP-2001, TJP-2001S, TJP-2002, TJP-2002S, TJP-5001, and TJP-5002 Series jacks.Features: Pullpin assembly replaces the pullpin for your etrailer or Ram pipe-mount swivel jack Designed for use with Ram TJP-2001, TJP-2001S, TJP-2002, TJP-2002S, TJP-5001, and TJP-5002 Series jacks Includes pullpin, chain, and mounting rivet Pin diameter: 9/16"
... Pull grips on the round end make the plug easy to install and remove.Features: Adapter converts your 7-way round pin connector to a 7-way RV-style connector Built-in cover protects the 7-way blade end from dirt and moisture when not in use Hinged cover opens 180 degrees for effortless connection Pull grips on the 7-way round pin connector make plug easy to install and remove ABS plastic construction is strong and durable Flexible wire between plugs provides wide range of motion Specs: Overall length: 14" Length between the plugs: 6" This adapter allows the 7-Way, round-pin, vehicle-end connector to work with the 7-way blade, RV-style, trailer-end connector on the right.
The 180 hitch has a chrome-plated double-sided tow ball, so switching sizes is a breeze. Tow up to 8,000 lbs with the 2" ball or up to 12,500 lbs with the 2-5/16" ball. Flip the platform out of the way when not in use and save your shins.This ball mount's convenient stowable design keeps the ball mount platform out of your way when you're not towing. To stow the ball mount platform, simply pull out the dual pins and remove the platform from the shank. Place the ball mount platform on the backside of the shank facing your vehicle.
Upgrade to a 14-pin connector for your vehicle with this socket. Built-in magnet creates tight connection with an EZ Connector trailer-end plug (sold separately). ... Pins and blades can bend, corrode, and even break off, which can lead to a permanently damaged connection. With the EZ Connector system, there are no pins or blades to bend or break.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. ... Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up. For example, a 50,000-lb trailer has a pin weight of about 12,500 lbs. For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs.
Filters
