Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.But sometimes it can be a real pain in the arm to crank your boat trailer up and down, even when the sun and rain isn't beating down on you. Trailer Valet was thinking of you when they made this jack. Just slot the included drill attachment into your power drill's 1/2" chuck, remove the handle from the jack's driveshaft, and attach the drill in its place.
... Grab your drill, drop the leg, and lift the trailer without breaking a sweat. When it's time to tow, the jack swings up and stays out of the way.Highlights Drill-Powered Operation: Raise and lower the jack using a standard cordless drill. One-Handed Drop Leg Adjustment: Quick-release handle drops the leg fast and cuts down how much you have to crank.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.But sometimes it can be a real pain in the arm to crank your boat trailer up and down, even when the sun and rain isn't beating down on you. Trailer Valet was thinking of you when they made this jack. Just slot the included drill attachment into your power drill's 1/2" chuck, remove the handle from the jack's driveshaft, and attach the drill in its place.
You just backed your rig in, it's hot, and you aren't in the mood to crawl around in the gravel. Sound familiar? Skip the jack-lugging and crank-crawling. Grab your drill and drop both legs from one side before your drink has time to sweat.Tough Powder-Coated Finish: Wrinkle black coating helps protect against rust, chips, and grime. Features to Know About Powered Setup with the Drill You Already Own The last thing you want is to crank jacks or mess with wiring. This stabilizer gives you powered control without tapping into your RV's battery or installing switches.
You're hauling equipment, not lawn chairs. The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.Features to Know About Welded Mount with Quick-Remove and Drill-Ready Design This jack welds directly to your trailer frame using the included male pipe bracket, giving you a solid, permanent base. The jack slides on and off the mount for transport or security, and it comes with a Trailer Valet drill attachment that works with your cordless drill.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.But sometimes it can be a real pain in the arm to crank your boat trailer up and down, even when the sun and rain isn't beating down on you. Trailer Valet was thinking of you when they made this jack. Just slot the included drill attachment into your power drill's 1/2" chuck, remove the handle from the jack's driveshaft, and attach the drill in its place.
This JXC A-frame trailer jack features a manual hand crank, but can also be powered by any 18-volt to 24-volt compact drill when using the included attachment. Great for boat or cargo trailers. ... Features: Utility jack lets you raise and lower your A-frame trailer Drill power option Compatible with any 18-volt to 24-volt drill using the included drill attachment Footplate minimizes sinking in soft ground Patented gear material composition delivers maximum efficiency while reducing heat retention Wrinkle black powder coat offers weather resistance Specs: Bracket height: Retracted: 9-1/2" Extended: 23-1/2" Travel: 14" Clearance: 13-1/2" from mounting bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Lift capacity: Manual: 1,600 lbs With drill: 800 lbs Support capacity: With footplate: 5,000 lbs With wheel: 1,200 lbs Jack height adjustment range: 23" - 37" Gear ratio: 12:16 1-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord (sold separately) lets you power the jack directly from the 7-way on your vehicle. ... Features: Electric jack lets you raise and lower your A-frame trailer quickly and easily Power Swap auxiliary cord (sold separately) allows you to power the jack directly from the 7-way on your tow vehicle Cord can be stored under jack cover when not in use Integrated storage ring keeps safety chains off the ground when not in use 3 LEDs illuminate the area for simple nighttime setup Helical-cut gears with angled teeth gradually mesh for quiet, efficient operation Crank-thru socket allows you to manually operate jack if needed Easy bolt-on installation - hardware included Heavy-gauge steel construction ensures durability and strength Black powder coat finish resists rust and corrosion Durable, textured housing prevents chips and cracks Specs: Bracket height: 10-3/4" Retracted 28-3/4" Extended Lift: 18" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 47.2 seconds Retracts 6" in 43.5 seconds Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Power consumption: 30 amps Lift capacity: 3,500 lbs 1-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord allows you to power the jack directly from the 7-way on your tow vehicle. ... Features: Electric jack lets you raise and lower your A-frame trailer quickly and easily Power Swap auxiliary cord allows you to power the jack directly from the 7-way on your tow vehicle Cord can be stored under jack cover when not in use Integrated storage ring keeps safety chains off the ground when not in use 3 LEDs illuminate the area for simple nighttime setup Helical-cut gears with angled teeth gradually mesh for quiet, efficient operation Crank-thru socket allows you to manually operate jack if needed Easy bolt-on installation - hardware included Heavy-gauge steel construction ensures durability and strength Black powder coat finish resists rust and corrosion Durable, textured housing prevents chips and cracks Specs: Bracket height: 10-3/4" Retracted 28-3/4" Extended Lift: 18" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 47.2 seconds Retracts 6" in 43.5 seconds Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Power consumption: 30 amps Lift capacity: 3,500 lbs 1-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. ... Features: Power stabilizer jacks provide an easy way to upgrad to power leveling New motor is 2x faster than previous versions Legs extend up to 30" for quick leveling New embossed legs add strength Automatically adjusts to the terrain so uneven ground is not a problem Motor indepently controls both legs for more control Switch kit allows you to easily retract and extend the jacks with the flip of a switch Heavy-gauge steel construction ensures durability Lighter weight than previous models Black powder coat finish stands up to the elements and resists corrosion Front and rear mounting applications available for maximum stability Specs: Overall dimensions: 78" long x 20" wide x 4-3/4" tall Lift: 30" Motor: 12-volt DC Mounting hole spacing: 68-11/16" from center-hole to center-hole Includes a 6 amp auto-reset circuit breaker 1-Year limited warranty
Auxiliary power cord allows you to power your Power Stance RV tongue jack directly from the 7-way on your tow vehicle. 30 Amp. Black color.Features: Auxiliary power cord allows you to power your Power Stance RV tongue jack (LC69VR - sold separately) directly from the 7-way on your tow vehicle Black color Amperage: 30 amps
Replaces the power switch for your Lippert Components high-speed power stabilizer jack (LC369774). White color.Features: Replaces the power switch for your Lippert Components high-speed power stabilizer jack (LC369774) White color Quantity: 1 replacement power switch
Replaces the bubble level for the top of your Bulldog 4,000-lb powered-drive camper jack (BD500199 or BD500200). Includes mounting screws.Features: Replaces the bubble level for the top of your Bulldog 4,000-lb powered-drive camper jack (BD500199 or BD500200) Includes installation screws Fits: Bulldog 4,000-lb powered-drive camper jacks: BD500199 and BD500200
Perfect for motorhomes with Power Gear or Kwikee leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. ... Features: Heavy-duty rubber pads snap onto your Class A or C motorhome's Power Gear or Kwikee leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A and Class C motorhomes (see chart below) with Power Gear or Kwikee leveling systems and (4) 10" concave round jack feet Dimensions: 13-1/4" long x 13-1/4" wide x 2-3/4" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Replaces the foot pad for your Lippert 3,500-lb power tongue jack (LC285318).Features: Replaces the foot pad for your Lippert 3,500-lb power tongue jack (LC285318) Includes 1 replacement foot pad Specs: Width of foot plate: 5-1/2" Inner tube diameter: 2" Height from top of foot plate to center of pin hole: 1-5/8"
Perfect for Class A and C motorhomes with Power Gear leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. ... Features: Heavy-duty rubber pads snap onto your Class or C motorhome's Power Gear leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A and Class C motorhomes (see chart below) with Power Gear leveling systems (3) 10" concave round jack feet Dimensions: 13-1/4" long x 13-1/4" wide x 2-3/4" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Stabilize and level your travel or 5th-wheel trailer with this unique device. Designed to span the width of your rig for maximum support, the opposing sides of this stabilizer can be adjusted independently for effective leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailer Not recommended for use on front of motorized vehicle Stabilizes with wide side support brackets Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Hand crank attaches for manual operation Sturdy steel construction Specs: Application: trailers and RVs with frames from 48" to 80" wide Lift: 30" Bracket width: 36" Weight capacity: 6,000 lbs 3-Year warranty
It's never been easier to stabilize, help level and help raise your travel or 5th-wheel trailer. This electric stabilizer spans the width of your rig for maximum support and has dual, 12V motors that function independently for simple leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailer Stabilizes with wide side support brackets Able to be used at the front of the trailer Not recommended for use on front of motorized vehicle Dual, 12V motors operate independently of one another for simple, effective leveling Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Emergency hand crank included Sturdy steel construction Specs: Application: trailers and RVs with frames from 48" to 80" wide Bracket length: 36" Lift: 30" Weight capacity: 6,000 lbs when extended to 30" Weight capacity when legs are extended to 15" is 3,000 lbs 3-Year warranty
It's never been easier to raise, level and stabilize your travel or 5th-wheel trailer. This electric stabilizer spans the width of your rig for maximum support and has dual, 12V motors that function independently for quick, simple leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailer Stabilizes with wide side support brackets For use on rear frame of pulled travel trailer Not recommended for use on front of motorized vehicle Dual, 12V motors operate independently of one another for simple, effective leveling Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Switches and emergency hand crank included Switch harness has 10-gauge wires Sturdy steel construction Specs: Application: trailers and RVs with frames from 42" to 77" wide Requires 24" of space on the frame of your trailer or RV Lift: 22" Weight capacity: 6,000 lbs 3-Year warranty
Topwind A-frame jack offers powered capability with built-in drive nut. Use your drill and socket to quickly raise and lower jack, or operate it manually. 14" Travel makes this jack ideal for multiple agricultural and commercial applications.Features: Utility jack lets you raise and lower your A-frame trailer Perfect for agricultural and commercial applications Topwind handle has textured grip for easy cranking Easily flip between cranking and stored positions Drive-nut option lets you use your power drill and 3/4" socket head (not included) for faster operation Black powder coat finish resists corrosion Removable foot pad with locking pin included Specs: Bracket Height: Retracted: 9-3/4" Extended: 23-1/2" Lift: 14" Clearance: 13-1/8" From bottom of mounting bracket to top of jack 16-1/2" From bottom of mounting bracket to top of handle Inner tube diameter: 2" Outer tube diameter: 2-1/4" Handle radius: 6" Footplate diameter: 5-3/8" Lift capacity: 2,000 lbs 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. ... Features: Electric jack lets you raise and lower your A-frame trailer quickly and easily Up/down buttons allow easy one-touch operation Hitch recognition memory function makes hooking up simple Automatically returns your trailer to the position at which you unhooked Helical-cut gears with angled teeth gradually mesh for quiet, efficient operation Backlit control panel makes it easy to see and operate this jack at night Battery indicator on control panel displays the coach battery level LED halo lights illuminate downward to help you focus on your coupler, hitch ball, and weight distribution hookup Extra-large footplate provides excellent stability Drop leg offers additional height adjustment Manual override is located conveniently at the top of the jack, if needed Heavy-gauge steel construction ensures durability and strength Black powder coat finish resists rust and corrosion Durable, textured-housing prevents chips and cracks Easy bolt-on installation Wires to 12-volt power source Specs: Total lift: 22-1/2" Screw travel: 18" Drop leg travel: 4-1/2" Footplate diameter: 9" Motor voltage: 12 volts Power consumption: 30 amps Lift capacity: 3,500 lbs 1-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Your arm stalls mid-crank with a loaded tongue. Been there. This A-frame jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. You raise and lower smoothly without fighting the handle, and hitching doesn't drag on.Highlights Faster Hitching With a Drill: Raise and lower with your drill using the included 3/4" socket, so hookup takes less cranking. 2,000-lb Lift Capacity: Lift trailer tongue weight with a 2,000-lb-rated jack, so loaded campers and work trailers can be coupled. Fold-Down Sidewind Handle: Switch from hand cranking to drill operation by folding down the sidewind handle for power tool access.
This Trailer Valet drill powered direct weld trailer jack is rated for 10,000 lbs static load, providing manual or drill operation to raise or lower a trailer with reduced effort.
Replace the power unit for your etrailer or Ram hydraulic trailer jack or scissor hoist system. Dual-action system powers both up and down. Reservoir has 4-qt capacity. ... Features: Replaces the power unit for your etrailer or Ram hydraulic trailer jack or scissor hoist system Powersjack both up and down Includes remote control with 12' cord Works with 12V DC RV/marine trailer battery (not included) Specs: 1.6KW 12V DC motor Reservoir capacity: 4 quarts Working pressure: Extension: 3,200 psi Retraction: 1,500 psi Dimensions: 16" long x 7-1/8" wide x 8-1/8" tall
Filters
