Safeguard your trailer wire connectors against moisture, dust, and corrosion with this plugprotector. Secures to trailer to protect harness from impact and abrasion. Fits 7-way round connections. Hardware not included.Features: 7-Way plugprotector safeguards your trailer wire connectors against moisture, dust, and corrosion Secures to trailer to protect harness from impact and abrasion Surface mount with four screws - hardware not included Specs: Dimensions: 3-3/16" wide x 2-15/16" tall x 2-1/4" thick 3-Year warranty
... This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.This brake controller is not compatible, but will not interfere, with Apple CarPlay or Android Auto. One-Step Installation The Curt Echo is unique for its plug-and-play installation. With no wiring or permanent installation, setting up the Echo is a breeze. The main unit plugs into the 7-way at the rear of your vehicle and then the 7-way trailer connector plugs into it.
... Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. 7-way RV-style plug makes setup easy.Features: Electric jack lets you raise and lower your A-frame trailer Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location 2 Toggle switches on the front of the housing let you operate the jack On/off switch controls light Extend/retract switch controls up and down movement 7-way RV-style plug pulls power from your vehicle's trailer connector No need to manually wire for power 7-Way must have active 12 volt pin LED light illuminates at a downward angle to help you focus on your coupler Emergency crank (included) allows you to manually operate jack if needed Black powder coated outer tube Zinc-finished inner tube and footplate resist corrosion Simple, bolt-on installation Specs: Bracket height: Retracted: 9" Extended: 28-1/2" Total lift: 25-1/8" Screw travel: 19-1/2" Drop leg travel: 5-5/8" Clearance: 20-1/2" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Hole spacing on drop leg: 1-7/8" Footplate diameter: 5-1/2" Lift capacity: 3,500 lbs 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
Designed to use with your Curt Echo In-Line brake controller for easier installation. One end of this no-splice wiring harness plugs into your vehicle's OEM socket. The other end plugs into your 7-way connector (sold separately).Features: Wiring extension provides 20" of extra length for easier positioning and installation of your Curt Echo In-Line brake controller Connects OEM USCAR socket to 7-way connector (not included) or the Echo In-Line harness Simple plug-and-play design eliminates the need for cutting or splicing Slit loom keeps wires contained and protected 1-Year limited warranty
This socket plugs into T-connector to provide a 7-pole trailer connector in the truck bed for use with fifth wheels. Connector plugs into OEM wiring harness to allow for a 7-pole connector in the truck bed.Features: 7-Pole, sealed socket, RV-style trailer connector with T-connector Plugs into OEM harness - no splicing Provides quick and easy installation of RV socket in truck bed High-impact nylon construction Resists corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents intrusion of moisture when closed Has drain slot and angled design for drainage Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Application: Chevy, Dodge, GMC, Ford and Nissan trucks Current rating: 30 amps Volt rating: 12 volts Length: 7-1/2 feet Recommended hole cutout for connector in bed: 2-1/8" 1-Year limited warranty
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord allows you to power the jack directly from the 7-way on your tow vehicle. Extends 6" in 47.2 seconds with 1,000 lbs of tongue weight.
... This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.Then you're ready to tow! Note: If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake controller installation kit (ETBC7 - sold separately).
This 7- and 4-pole connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system with Chrysler/Dodge OEM plug adapter and bracket.
You've got a 4-flat on the vehicle and a 7-way on the trailer. No time to rewire. You grab this adapter, plug it in, and the built-in lights confirm the signals are live. Now you just need to load up and hit the road.Highlights 4-Flat to 7-Blade: Adapts a 4-way vehicle socket to a 7-way trailer plug. LED Test Lights: Show active signals during hookup. Plug-In Adapter: No cutting or splicing required. Ergo Grip Design: Easy to handle, even with gloves.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display is large and bright so it's easy to see, while the large manual override is easy to reach in a pinch.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
Establish a secure connection between your trailer and semi or other tow vehicle with this heavy-duty, 7-pole RV blade-style socket and mounting bracket.Features: Heavy-duty, 7-pole, RV blade-style socket connects tow vehicle to trailer Zinc, die-cast housing for durability Maximum amperage: 35 Includes mounting bracket and hardware 12-704 Pollak RV 7-Blade Plug End Socket with Bracket
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
... Integrated voltage regulation. Recessed mount with included grommet and AMP-style plug.Features: Oval LED trailer tail light serves 4 functions Turn signal, tail light. and brake light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Cyclops-style design integrates back-up light into tail light LumenX optics creates a solid panel of light that illuminates the entire lens Skirted weld joint provides added protection against moisture LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Red and clear lens over white LEDs Compatible with 12V DC systems Recessed mount with included grommet Mounts in any 360-degree position Industry-standard AMP-style plug DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 1-7/16" deep Diodes: 7 Power draw at 12V: Stop/turn: 0.19 amps Tail: 0.02 amps Reverse: 0.51 amps Input voltage: 9V - 16V DC 10-Year limited warranty Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
This complete kit allows you to add a 7-pole, RV-style socket to your truck bed for use with a fifth wheel or gooseneck. Kit includes socket, an adapter that plugs directly into your OEM wiring harness and a T-Connector to integrate the system.Features: 7-pole, sealed socket RV-style socket with T-Connector and Dodge/Chrysler adapter plug Provides 7-pole connector in the truck bed Plugs into Dodge/Chrysler OEM harness - no splicing Provides quick and easy installation of RV socket in truck bed High-impact nylon construction Resists corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents intrusion of moisture when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Application: Dodge trucks with factory plug Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 10 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty 11-893, 11-933, and 11-932 Pollak 7-Way Socket with T-Connector and Adapter for Chrysler Trucks pulling Fifth Wheels or Goosenecks Replaces 20111 Similar to V30137
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately.
You switch between trailers and want less hassle. One connector at the vehicle keeps hookups quick so you can plug in and go without hunting for parts.Quick Hookups: Choose the plug you need without rewiring.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and visible in any weather.Features: Diffused strobe or DOT lamp in a 6" oval form factor Grommet-mount design with dual AMP connector Meets or exceeds FMVSS 108; Amber strobe meets SAE J595 IP68 rated for dust and water incursion Sonically welded housing for a 100% sealed light Comes with lifetime warranty Wire colors: White - Ground, Red - High/Turn, Black - Low/Dim Specs: Dimensions (grommet mount): 6-1/2" L x 2-1/4" W x 1-1/2" D LED count: 32 Voltage: 9-14 VDC Current - Amber strobe's reverse: 0.575 A (± 0.085 A) Current - Amber strobe: 0.280 A Current - Stop/Turn: 0.170 A (± 0.030 A) Current - Tail: 0.075 A (± 0.012 A) Current - Reverse: 0.575 A (± 0.085 A) Plug: Dual AMP Mounting: Grommet LED color: Amber Lens color: Clear only This all new light from TecNiq combines all the features of a traditional stop, tail, turn, and reverse lamp, with the new styling of a diffused top and bottom lensing.
Filters
