These bright LEDs stick onto the back of your towed car and display turn and brake signals without tapping into the electrical system - which means no permanent modification to your car! Great for cars that won't work with traditional diodes.Highlights Complete Flat Tow Wiring Kit: Combines light kit and 7-way to 6-way cord. No Vehicle Wiring Changes: LED strips avoid tapping into factory wiring. Bright LED Signal Display: Shows brake and turn signals while towing.
These bright LEDs stick onto the back of your towed car and display turn and brake signals without tapping into the electrical system - which means no permanent modification to your car! Great for cars that won't work with traditional diodes.Highlights Complete Flat Tow Wiring Kit: Combines light kit and 7-way to 6-way cord. No Vehicle Wiring Changes: LED strips avoid tapping into factory wiring. Bright LED Signal Display: Shows brake and turn signals while towing.
PC rated. 1" Diameter, waterproof mini LED amber light functions as a side marker and clearance light when properly mounted. Recessed-mount installation with included grommet. 2-Wire design. 18" Long pigtail.Features: Small, round LED light serves as a side marker and clearance light for your trailer Sealed, waterproof housing and lens unit Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LED is energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Durable UV-resistant lens Clear lens over amber LED Compatible with 12V DC system Recessed-mount installation with included grommet Requires a 3/4" diameter cutout Add on stainless steel trim ring (sold separately) for a finished look 2-Wire harness hardwires to your application Includes white ground wire Meets or exceeds FMVSS 108 standards PC-rated light produces a 180-degree beam Assembled in the USA Specs: Dimensions: 1" diameter x 7/8" thick Diodes: 1 Input voltage: 9V - 14V Power draw: 0.03 - 0.06 amps Wire length: 18" IP rated: 68 Limited lifetime warranty Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Plug-and-play custom harness gets turn and brake signals on your towed car with no hardwiring or splicing, and no effect on your warranty. The built-in diodes protect your car from electrical feedback.Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
This wiring kit carries brake and turn signals from your motorhome to your towed car while you're flat towing. Diodes protect your car from damage from electrical feedback."Don't be intimidated by diodes: if you can strip and crimp wire, this installation will be no problem." Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way adapter cable and 6-way car-side socket."Don't be intimidated by diodes: if you can strip and crimp wire, this installation will be no problem." Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
Get a head-start on wiring your towed car before you even get the installation started. This kit comes with butt connectors pre-installed and ready to splice into your wiring. ... Features: Connects your RV's tail, brake, and turn signal lights to your towed car's tail lights Plugs into your motorhome with 4-way flat connector Splices quickly into car's electrical system with included butt connectors Color-coded wires with wiring guide makes installation easier Prevents feedback that can damage your vehicle's electrical components with integrated block diodes Includes 4-wire harness, 4-flat extension cable, mounting bracket, silicone sealant, zip-ties, and installation hardware 1-Year limited warranty Do I Need a Brake Light Relay?
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.Features: Rectangular combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted Stop, tail, turn, side marker, side reflex, rear clearance, and rear reflex Built-in license plate light on driver's-side light illuminates license plate Sealed, waterproof construction is submersible Designed for marine trailer applications Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red acrylic lens screws on and can be easily replaced Molded plastic housing Mounts on surface of trailer - stainless steel hardware included Includes license plate bracket for mounting driver's side light 3-Wire pigtail 25-Ft Wiring harness for making connections DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting P2PC rated Specs: Configuration: driver side (STL17RB) Passenger side (STL16RB) Dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Diodes: 40 Driver's-side light: 22 diodes Passenger's-side light: 18 diodes Power draw at 12.8 volts: Stop/turn signal light: 0.259 amps Tail light: 0.062 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of these lights make them ideal for use on trailers that may be submerged, like a boat trailer.
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
Stick these heavy-duty magnetic lights on the back of your car and they'll stay there. Nice and secure, these are also the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Mounts securely with heavy-duty magnets Includes 2 lights and wiring harness with 4-way flat trailer connector Heavy-duty vinyl protects wiring from the elements Meets DOT standards Specs: Universal fit for all vehicles Wiring harness length: 20' Wire length between lights: 4-1/2' Separate wire with 4-way for tow vehicle : 3' long Bulb type: 2057 double filament 3-Year limited warranty on housing and wiring only Will These Magnetic Lights Work On My Vehicle?
These bright LEDs stick onto the back of your towed car and display turn and brake signals without tapping into the electrical system - which means no permanent modification to your car! Great for cars that won't work with traditional diodes.Features: LED light strips adhere to the rear of your car and display brake and turn signals No modification to your vehicle No risk of damage from electrical feedback Great for cars that are not compatible with traditional wiring diodes IP68 rating protects LED lights from moisture and dust Color-coded Y wiring harness reaches both sides of the car for easy installation Kit includes everything you need to wire your vehicle's tail lights for flat towing (2) 10" Long LED strips with 3M adhesive 2 Plug-and-play flip latch wiring connectors Wiring harness Zip ties and cable tie mount pads LED output: 152 lumens Made in the USA Limited lifetime warranty
Trailer kit with 2 stud-mount, submersible tail lights; corrosion-resistant license-plate bracket; 2 amber side marker and clearance lights; 25' wiring harness with 4-pole connector; mounting hardwarePlease check the amperage capacity of your vehicle wiring harness to ensure this light kit will not overload your wiring harness. Packaged kit includes 2 submersible, stud-mount tail lights, 2 amber side markers and a corrosion-proof license-plate bracket Contents: (1) ST6RB, (1) ST7RB, (2) MC36AB and (1) license-plate bracket Equipped with a 25' wire harness and mounting hardware
... They mount inside your vehicle's tail light housing, with the wiring out of sight.Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's tail light housing Requires drilling Includes wiring, 2 incandescent lights, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA 1-Year warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
Stick these bright, efficient LED lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring. ... Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Shines brighter and more efficiently than incandescent bulbs Lasts 50 times longer Attaches with magnets Protective label keeps the magnets from scratching your car Works year-round Lens housing is sonically sealed and waterproof Includes 2 red LED lights and wiring harness with 4-way flat trailer connector Meets DOT standards Specs: Universal fit for all vehicles Light diameter: 4-1/4" Overall dimensions: 3-7/8" long x 5-15/16" tall x 2-3/16" wide Tow light harness length: 245" Wiring length between lights: 63" Length of additional wiring harness for RV: 35" Diodes (per light): 6 Power draw at 12.8 volts Stop/turn signal light: 0.36 amps Tail light: 0.03 amps Lifetime warranty on LEDs Will These Magnetic Lights Work On My Vehicle?
... They mount inside your vehicle's tail light housing, with the wiring out of sight.Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's tail light housing Requires a 1" diameter hole drilled into the tail light housing Includes 2 wiring harnesses, 2 incandescent lights, 2 sockets, and installation hardware Made in the USA Specs: Overall measurement of bulb: 2-1/4" Length of bulb from flange to top of bulb: 2" Length past mounting surface: 1-7/8" 4-Way flat harness: 30' long RV harness: 6' long Hole required for sockets: 1" diameter Limited lifetime warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
Ensure your trailer is clearly visible and meets safety regulations with this amber side marker light. It fits a 3/4" grommet and features a 9" wire tail for easy, low-profile installation.Features: Amber LED side marker light enhances visibility and safety on trailers and utility vehicles Compact design fits standard 3/4" grommet mount openings Half the depth of standard 3/4" lights, ideal for tight-space mounting Sealed polycarbonate lens protects against impact and UV exposure IP68-rated construction delivers dust and water resistance TecSeal urethane potting safeguards internal circuitry Rated for over 100,000 hours of reliable LED life Meets PC/P2 output requirements under FMVSS 108 Specs: Mounting style: 3/4" grommet Wire lead: 9" pigtail Lens color: Amber Operating voltage: 9-14 V DC Current draw: 0.06-0.09 A Dimensions: 1" diameter x 5/8" depth Certifications: IP68, FMVSS 108 compliant Sealed, Waterproof Trailer Light Maintaining a functioning lighting system for your boat trailer is required by law.
Wire your vehicle's tail lights for flat towing with this universal diode kit. Heat-sealed diodes prevent electrical feedback, while the unterminated 4-wire harness lets you add the front connector that works best with your setup.The unterminated harness allows you to select a connector that accommodates your flat towing setup, including additional circuits for a battery charge line or supplemental braking system. This kit wires your towed car as a combined lighting system, meaning that the brake and turn signals travel along the same wire. Combined Lighting System vs Separate Lighting System A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning.
Connect your towed car's lighting system to your RV's to get the brake lights and turn signals required for towing. Designed for use with vehicles that have separate brake and turn signals. 4-Pole flat loop and wiring converter included.Features: Connects your RV's tail, brake and turn signal lights to your towed vehicle's lighting system Designed for use on towed vehicles that have a 3-wire system (separate brake and turn signals) Prevents electrical feedback and the damage it can cause to your towed car's electrical components Includes tail light converter to adapt your RV's 2-wire system (combined brake and turn signals) to work with the towed car's 3-wire system Contains everything you need to wire your car for flat towing 6 Hy-Power diodes Tail light converter 30' Long strand of 4-wire electrical cord 6' Long cord with 4-way flat connectors - both vehicle and RV ends Ring terminal and wire connectors 3' Long split-wire loom Limited Lifetime Warranty Specs: Max amperage: 85 amps Max voltage: 24 V Note: If your RV has separate brake and turn signal lights, you do not need to install the included tail light converter.
Ensure your trailer is visible and compliant with this red side marker light. It fits into a 3/4" grommet and includes a 9" wire for easy, low-profile installation.Features: Red LED side marker light provides reliable visibility for trailers and utility vehicles Compact design fits standard 3/4" grommet mount openings Half the depth of standard 3/4" lightsgreat for tight-space installations Sealed polycarbonate lens resists impact and UV damage IP68-rated construction blocks out water and dust TecSeal urethane potting protects internal circuitry Rated for over 100,000 hours of LED life Meets PC/P2 output requirements under FMVSS 108 Specs: Mounting style: 3/4" grommet Wire lead: 9" pigtail Lens color: Red Operating voltage: 9-14 V DC Current draw: 0.06-0.09 A Dimensions: 1" diameter x 5/8" depth Certifications: IP68, FMVSS 108 compliant Sealed, Waterproof Trailer Light Maintaining a functioning lighting system for your boat trailer is required by law.
6-1/2" x 2-1/4" Oval. LED trailer tail light with 5 hardwired leads serves 4 main light functions. LumenX optics create a solid panel of light. Integrated voltage regulation. ... Features: Oval trailer tail light serves 4 functions Works as a turn signal, tail light, brake light, and backup light Cyclops-style design integrates backup light into tail light LumenX optics create a solid panel of light that illuminates the entire lens LEDs make great replacements for incandescent lights Can last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Integrated voltage regulation ensures consistent light output and prevents overheating Red and clear lens over red and white LEDs Compatible with 12V DC systems Recessed mount with grommet (B421-18 - sold separately) Mounts in any 360-degree position 5 Hardwired leads are terminated with separate AMP connectors DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 1-3/8" deep Diodes: 7 Power draw at 12V Input voltage: 9V - 16V DC 10-Year limited warranty
These bright little lights get turn and brake signals on your towed car without splicing into its wiring. They fit nicely inside your vehicle's tail light housing, with the wiring out of sight. ... Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Fits easily in tail light housing - requires only a 9/16" hole Requires drilling Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 white LEDs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA Specs: Wiring harness length: 26' Brown and green wire length: 8' 16 Gauge 1-Year warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
These lights get turn and brake signals on your towed car without splicing into its wiring. They mount inside your vehicle's tail light housing, with the wiring out of sight. ... Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's tail light housing Requires a 1" diameter hole drilled into the tail light housing Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 red bulbs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome sold separately Made in the USA Specs: Wiring harness length: 27' Light output per bulb: 450 lumens Overall length of bulb: 2-1/2" Length of bulb from flange to top of bulb: 2" Hole required for sockets: 1" diameter Wire loom: Length: 3' Diameter: 1/2" Limited lifetime warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
If you want to flat tow your vehicle with animated rear lights and have to use a battery bypass, use this kit to connect power and signal from your motorhome or tow rig. The tail lights will work properly without damaging your vehicle.Features: Kit for animated tail lights is used in conjunction with other parts and systems required for a flat tow set-up Allows you to bypass your battery during flat towing Lead can be wired in at the 6-way receiver to the plug from your motorhome or tow rig Can also be run off a lead from a battery charge line kit Quality wire, fittings, and a braided sleeve to protect the wiring and your vehicle Includes: 26' Wiring harness (6) 6-amp diodes Spade connectors, butt connector, ring terminal, and self-tapping screw Specs: Application: vehicles featuring progressive/animated lights that require the battery to be disconnected for flat towing - consult your owner's manual 1-Year warranty
This single block diode makes it easier to get your wiring kit installed, creating just one place to connect all your wires. Carries brake and turn signals from your RV to your towed car while flat towing and prevents damage from electrical feedback.Type B Towed Car The diagram above shows the installation of Blue Ox's tail lightwiring kit on vehicles that have separate amber turn signals and red brake lights (a separate/3-wire system), as well as a brake lightwire that splits before reaching the tail light sockets.
Filters
