Get more visibility out back without adding a cluster of separate lights. This slim 15" bar combines your stop, turn, tail, and backup lights, while the smoke lens keeps a low-key blacked-out look when the lights are off.Highlights Four Functions in One LightBar: Stop, turn, tail, and back-up lighting share one 15" fixture. Black-Out Look When Off: Smoke lens keeps the lightbar dark until the red or white LEDs illuminate.
15-1/2" Long x 1" tall x 1/2" thick ID lightbar. Waterproof LED identification lightbar with integrated utility light for trailers. Polycarbonate lenses and base. Surface mount. ... Features: Trailer light functions as an identification lightbar for trailers wider than 80" Also has a built-in utility light Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and base construction Mounts to surface of trailer Hardwire installation DOT compliant P2 rated Specs: Overall dimensions: 15-1/2" long x 1" tall x 1/2" deep Distance between mounting holes (center on center): 14-1/2" Mounting hole diameter: 1/8" Diodes: 17 12-Volt application Lumens: 500 Actual 400 Effective Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID lightbar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 20-1/2" long x 1" wide x 3/4" thick Distance between mounting holes: 19-5/8" Diodes: 21 Voltage: 12V Power draw: Stop/turn: 0.265 amps Tail: 0.24 amps Reverse: 0.30 amps Lifetime warranty on LEDs
15-9/16" L x 1-3/16" W x 1-5/16" D; Three separate lights on the base; lights have replaceable lenses and bulbs; surface mount on 6-1/8" centers; 1-wire; total of 3 incandescent bulbsThis red three lightbar measures 15-9/16" long x 1-3/16" wide x 1-5/16" deep. Lightbar contains three separate, replaceable MC68RB lights on a white base.
Strap this 8" long x 1-1/2" wide light onto your roll cage to get bright, lasting light. Simply remove LED bar from straps to get a portable light source. Magnetic backing plate lets you attach bar to metal surface for ultimate versatility.Features: Versatile lightbar provides interior light that can be mounted anywhere Durable hook-and-loop straps let you secure light to your Jeep's roll bar or the roll cage of your UTV Attach to bars up to 4" wide Remove lightbar from straps to create a portable light source Built-in magnetic backing plate allows you to affix light to metal surfaces Long-lasting, energy-efficient LEDs deliver bright white light Battery-powered unit is self-contained - no wiring needed Uses 3 AAA batteries (not included) Dimensions: 8" long x 1-1/2" wide
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID lightbar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 15" long x 1-1/16" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 15 Voltage: 12V Power draw: 0.29 amps Lifetime warranty on LEDs Quantity: 1 lightbar
This waterproof identification lightbar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. ... Features: LED trailer light functions as an identification lightbar for trailers wider than 80" 3 Optronics AL91 series lights are replaceable (AL91RB - sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens over white LEDs Surface mounts on trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Specs: Dimensions: 15-15/16" long x 1-1/2" tall x 1-5/8" thick Distance between mounting holes (center on center): 7-1/2" Diodes: 9 Power draw at 12.8V: 0.153 amps Wire length: 50" LIfetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
20-1/2" x 1". 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. ... Features: Low-profile trailer tail light serves 4 functions on trailers over 80" wide Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Compatible with 12V DC systems Surface mounts to trailer - hardware not included 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light Black wire for tail light DOT compliant SAE compliant for trailers over 80" wide Specs: Overall dimensions: 20-1/2" long x 1" tall x 3/4" deep Number of diodes: 19 Power draw at 12.8 volts: Stop/turn signal light: 0.265 amps Tail light: 0.24 amps Backup light: 0.3 amps Wire functions Black: tail light Red: stop/turn Yellow: backup White: ground Quantity: 1 light Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
14-1/4" Long x 1-3/16" tall x 1-5/16 deep. Waterproof identification lightbar with 3 replaceable red 3-LED lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. ... Features: Trailer light functions as an identification lightbar for trailers wider than 80" 3 Optronics MCL series lights are replaceable (MCL95RB - sold separately) Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Stainless steel base resists corrosion and rust Durable polycarbonate lens Mounts to surface of trailer - hardware included Single-wire design - light grounds through mounting hardware DOT compliant P2 or P3 rated Specs: Overall dimensions: 14-1/4" long x 1-3/16" tall x 1-5/16" deep Individual light dimensions: 2-1/8" long x 1-1/8" tall x 1-1/16" deep Distance between mounting holes (center on center): 8-1/2" Diodes: 9 3 Diodes per light Power draw at 12.8V: 0.153 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
16-1/4" Long x 1-1/4" tall x 1" deep. Identification lightbar is designed for trailers wider than 80". Mounts to surface of trailer - hardware not included. 2-Wire pigtail.Features: LED Trailer light functions as an identification lightbar for trailers wider than 80" Epoxy sealed, housing eliminates weld joints LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Compatible with 12V DC systems Mounts to surface of trailer - hardware not included Included foam mounting gasket creates a weathertight seal during installation 2-Wire pigtail includes power lead and ground wire #10 Ring terminal on ground wire P2 rated Specs: Dimensions: 16-1/4" long x 1-1/4" tall x 1" thick Distance between mounting holes (center on center): 8-1/2" Diodes: 6 Power draw at 12V: 0.3 amps Input voltage: 9V - 16V DC LED limited lifetime warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Keep the back of your trailer visible without adding lights that stick out against darker trim. The smoked lenses blend in nicely when parked, and the sealed construction is a good match for trailers that regularly see rain or water.Ready for Submersion: Sonically sealed construction is waterproof and fully submersible. Simple Surface Mount: Lightbar mounts to the surface with 8-1/2" mounting hole spacing. Features to know about Marker Lights That Blend into Dark Trim Bright marker housings can stick out against blackout trim even when the lights aren't running.
17" Long x 1-3/8" tall x 1" deep. Waterproof identification lightbar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.Features: LED Trailer light functions as an identification lightbar for trailers wider than 80" Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red lens over white LEDs Compatible with 12V DC systems Mounts to surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire P2 rated Specs: Quantity: 1 identification lightbar Dimensions: 17" long x 1-3/8" tall x 1" thick Distance between mounting holes (center on center): 16-1/8" Diodes: 3 Power draw at 12.8V: 0.022 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
14-1/4" x 1-3/16" x 1-1/16". Waterproof identification lightbar with 3-LED lights is designed for trailers wider than 80". Durable stainless steel base. Surface mount - hardware not included. 1-Wire design.Features: LED trailer light functions as an identification lightbar for trailers wider than 80" Sealed, waterproof housing and lens units is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable stainless steel base resists corrosion and rust Red lens over white LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 14-1/4" long x 1-3/16" tall x 1-1/16" deep Distance between mounting holes (center on center): 8-1/2" Diodes: 6 Power draw at 12V: 0.11 amps Wire length: 60" Limited lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Haul your large boat trailer safely, with this 12-15/16" x 2", submersible, V-shaped identification light. When attached to the back of your trailer, this red light indicates to other drivers that your trailer is 80" or wider.Features: LED identification light improves road safety by alerting other drivers that your trailer is over 80" wide V-shaped light is designed to fit your boat trailer's rear, V-bend cross member Sealed, waterproof unit includes UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Red lens over red LEDs Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation 12V DC compatible Surface-mount installation - hardware not included Hardwires to trailer Meets or exceeds FMVSS 108 standards Assembled in the USA Specs: Dimensions: 12-15/16" long x 2" wide x 1/2" thick Distance between mounting holes: 9" Diodes: 3 Input voltage: 9V - 14V Power draw: 0.07 - 0.09 amps Wire length: 58" IP rating: 68 Limited lifetime warranty
15" x 1-3/8". Waterproof, LED utility lightbar provides bright white light for your application. Ultra-thin design fits in tight spaces. Durable polycarbonate lens and housing. ... Features: LED utility lightbar provides bright white light for your application Not certified for backup light function Thinline Series has a low-profile design to fit into tight spaces Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Surface mount - hardware not included 2-Wire design - includes lead wire for power and ground wire Specs: Dimensions: 15" long x 1-3/8" wide x 5/8" deep Distance between mounting holes (center on center): 14-1/8" Diodes: 11 Power draw at 12.8V: 0.29 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
15-1/4" x 1-1/4" x 1/2". Waterproof, LED trailer light with 13 diodes provides stop, turn, tail, and rear reflex functions. Premium LEDs last up to 100,000 hours. Durable polycarbonate base. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
16" Long x 1-1/2" tall x 1-5/8" thick. Waterproof, incandescent identification lightbar is designed for trucks and trailers. Durable polycarbonate housing and lens. Surface mount. 2-Wire pigtail with 50" leads. ... Features: Red light strip functions as identification lightbar for trucks and trailers Lightbar has three replaceable A91RB lights attached to base Sealed, waterproof housing and lens unit Incandescent bulbs can be easily replaced Durable polycarbonate housing and lens Red lens over incandescent bulbs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes 50" lead wire and ground wire P2 rated Specs: Dimensions: 16" long x 1-1/2" tall x 1-5/8" deep Distance between mounting holes (center on center): 7-1/2" Power draw at 12.8 volts: 1.0 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 15745R Grote # 49172 Peterson # 150-3R Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
16-5/8" x 1" x 1-7/16". Incandescent identification lightbar is designed for trailers wider than 80". Durable powder-coated white base. Surface mount to trailer - hardware not included. 1-Wire design. (3) 194 bulbs.Features: Incandescent trailer light functions as a mini identification lightbar for trailers over 80" wide 3 Peterson 107R lights are replaceable (422600 - sold separately) Durable powder-coated white base is corrosion resistant Red lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 16-5/8" long x 1" tall x 1-7/16" thick Distance between mounting holes (center on center): 16-1/8" Bulb type: 194/193 Number of bulbs: 3 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 49112 Truck Lite # 1508R Optronics # MC99RB Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
20-1/2" x 1". 4-Function, waterproof lightbar acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. ... Features: Low-profile trailer tail light serves 4 functions on trailers over 80" wide Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens with red and white LEDs Clear lens with red LEDs for tail light Clear lens with white LEDs for backup light Surface mounts to trailer - hardware not included 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light Black wire for tail light DOT compliant SAE compliant for trailers over 80" wide Specs: Overall dimensions: 20-1/2" long x 1" tall x 3/4" deep Distance between mounting holes (center on center): 19-5/8" Diodes: 19 Power draw at 12.8 volts: Stop/turn signal light: 0.265 amps Tail light: 0.24 amps Backup light: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
16-1/2" Long x 1-3/8" tall. Waterproof identification lightbar with 3 lights is designed for trailers wider than 80" Durable stainless steel base. Surface mount to trailer - hardware not included. 2-Wire design with 50" leads.Features: LED trailer light functions as an identification bar for trailers wider than 80" 3 Optronics AL91 series lights are replaceable (AL91RB - sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable stainless-steel base Red lens over white LEDs Surface mounts on trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Specs: Dimensions: 16-1/2" long x 1-3/8" wide x 1-5/8" thick Distance between mounting holes (center on center): 16-1/16" Diodes: 9 3 per light Power draw at 12.8V: 0.153 amps Wire length: 50" Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 15050R Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
15" Long x 1-3/8" tall x 5/8" deep. Waterproof identification lightbar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire design. ... Features: Low-profile LED Trailer light functions as an identification lightbar for trailers wider than 80" Ultrathin design allows for installation in tight spaces Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red lens over white LEDs Compatible with 12V DC systems Mounts to surface of trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Overall dimensions: 15" long x 1-3/8" tall x 5/8" thick Distance between mounting holes (center on center): 14-1/8" Diodes: 3 Power draw at 12.8V: 0.038 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
17" Long x 1-3/8" tall x 1" deep. Waterproof identification lightbar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.Features: LED Trailer light functions as an identification lightbar for trailers wider than 80" Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over red LEDs Compatible with 12V DC systems Mounts to surface of trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 17" long x 1-3/8" tall x 1" deep Distance between mounting holes (center on center): 16-1/8" Diodes: 3 Power draw at 12.8V: 0.022 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
16-5/8" x 1" x 1-7/16". Incandescent identification lightbar is designed for trailers wider than 80". Durable powder-coated white base. Surface mount to trailer - hardware not included. 1-Wire design. (3) 194 bulbs.Features: Incandescent trailer light functions as a mini identification lightbar for trailers over 80" wide 3 Peterson 107A lights are replaceable (422400 - sold separately) Durable powder-coated white base is corrosion resistant Amber lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 16-5/8" long x 1" tall x 1-7/16" thick Distance between mounting holes (center on center): 16-1/8" Bulb type: 194/193 Number of bulbs: 3 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Optronics # MC99AB Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
Add a sleek and compliant red ID light to your trailer with this low-profile, surface-mount design. It installs with two screws and helps meet FMVSS 108 lighting standards.Features: Meets FMVSS 108 identification light requirements for vehicles over 80" wide Ultra-thin design (1/2" deep) minimizes protrusion for a sleek profile Clear lens with red LEDs creates bright, wide-angle illumination Vacuum-sealed and sonically-welded housing ensures lifetime protection Rugged polycarbonate lens resists impacts and UV damage TecSeal urethane potting and IP68 rating provide complete weatherproofing Durable design rated for over 100,000 hours of LED performance Flexible mounting can install horizontally, vertically, or at an angle Specs: Mounting: Surface mount with (2) #8 screws (screw covers included) Wire lead: 9" pigtail (white ground, black +12 V power) Lens color: Clear with red LEDs Voltage: 9-14 V DC Current draw: 0.04-0.07 A Dimensions: 15-1/2" long x 1-5/16" tall x 1/2" deep Certifications: FMVSS 108, IP68 rated
Filters
