Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The best way to find the correct replacement for your equalizer is by measuring the distance from the front shackle hole to rear shackle hole on your current equalizer. The 33" AllTrek #MR89DR has the holes spaced 6-1/2" on center while the…
view full answer...I spoke to TRC and they said the inside channel of the H-Channel for Enclosed Trailer part # 36281-955 is 1.027" wide.
view full answer...Appreciate the photos, and yes, the trim you asked about does look to be exactly what you are needing: - Even Rub Rail Trim for Enclosed Trailer - 1-1/2" Tall x 1/8" Deep - Aluminum #36284-955 This trim is 93-1/2" long, so if…
view full answer...Hey Susan, the inner lip of the Nosing Edge Trim part #362555-955 is 3/16 inch in diameter.
view full answer...The Nosing Edge Trim - Enclosed Trailer - 93-1/2" Long x 1" Tall x 3/16" Deep - Aluminum part #362555-955 has a rolled or rounded edge to finish off the sharp edges of the trailer. It does not have a slot that the sheeting will slip…
view full answer...The Kwikee Control Box #909506000 has been discontinued by the manufacturer. Unfortunately, if your steps were manufactured prior to February of 1999, then there are not replacement parts available and you'd need to replace the entire step. If it…
view full answer...Under the hood of your 2001 Chevy Silverado, remove the cover on the power distribution box. If standing in front of the truck facing the motor, the brake controller fuse will be that last large one in the back left corner, see picture. But the brake…
view full answer...The 120-LB #M354FR is going to likely be a better option with the door weight between 125-130lbs. While the 150-LB #362SA8207 will work the higher weight will make the door want to raise up off the ground which can be troublesome when trying to load…
view full answer...As long as your current mirrors look like the mirrors in the picture I attached the Longview Tow Mirrors part #LVT-1700 that you referenced would fit and work well for you. I attached an install video for these tow mirrors for you to check out as…
view full answer...If you think of the back of the trailer as flat and straight left to right, and the sides of the trailer flat and straight front to back, where they meet in the corner would be a right angle. If you were to mount the light in that corner, so that it…
view full answer...Personally, I recommended the J-Channel Trim for Enclosed Trailer #362415-955 which is made of a soft metal that will allow you to bend the metal to the shape of your camper.
view full answer...Generally speaking, the hub face measurements will be around 15" longer than the spring center measurement. That said, this can vary based on multiple different factors such as tire size, offset, etc. The most common options we offer are the…
view full answer...Filters
3794 results
Vehicle Fit
Fit 2024 Ford F-350 Super Duty