Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.If there's too much pressure on the push pad, the lights will turn solid red and blue. Edge the seat back until the lights return to a blinking blue and green. Your final step is to push the setup button. The Patriot will test the brake once and check for any errors.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH12) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16", and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
Keep your RV's interior off-limits with a new entry door lock. It replaces your original Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door lock. The lock can be keyed alike to match other Global Link locks.Features: Locking latch kit lets you secure the entry door on your RV or travel trailer Replaces your Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door latch Helps to keep intruders out and your belongings safe from theft Sturdy steel construction with rust-resistant black powder coat finish Rubberized foam gasket provides tight seal against your door 2 Keys, door edge plate, strike plate, and installation hardware included Lock can be keyed alike to match other Global Link locks To order keyed alike, select "Keyed Alike" from drop-down menu above and enter number of locks in Quantity box Specs: Dimensions: 3.47" wide x 4.28" tall Fits doors that are 1-1/4" to 1-1/2" thick Installs into latch cutouts that are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall 1-Year warranty Note: Lock can be keyed alike to match other Global Link locks.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH10B) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 13", 14", and 15" Axle rating: 3,500 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
This hitch-mounted cargo carrier tilts away from your vehicle - with gear loaded - for easy cargo area access, and it folds up for storage when not in use. The spacious basket has side rails that help contain your cargo and provide tie-down points.Before you tilt the carrier make sure your cargo is strapped down and secure. Simply support the front edge with one hand, remove the pins (standard 5/8" or 16 mm diameter 2" hitch pins) located in the upper and center shank holes, and gently lower the carrier.
9-1/8" Wide x 68-3/8" long x 17" tall. These sturdy teardrop fenders protect your tandem axle trailer from road debris. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo 1" Wide inner and outer edges are rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Sleek teardrop design offers a clean, stylish look Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 15" to 16" diameter wheels Dimensions: 68-3/8" long x 9-1/8" wide x 17" tall Quantity: 2 fenders Weight: 16 lbs 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels.Features: Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges help minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH12) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16", and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
Tired of your skis or tires catching on your trailer lip? These plates smooth out the transition so loading's quick and hang-up free. The low-friction surface and traction knobs keep everything gliding steady and safe.Features to know about Take the Jolt Out of Loading The moment your machine hits the bottom edge of your trailer shouldn't feel like a surprise. Edge Glide XL gives you extra room and a smoother path so skis, tires, and gear slide up the ramp instead of catching on the lip.
9" Wide x 72" long x 20-1/2" tall. These sturdy fenders have a flat back to mount flush with your tandem-axle trailer. Aluminum construction is corrosion resistant. Bolt or weld onto your trailer.Features: Rounded fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Flat mounting flange on inner edge lets you mount fenders flush with your enclosed trailer Close fit keeps dirt from building up between the fenders and trailer 1" Wide outer edge is rounded Rustproof, corrosion-resistant aluminum construction Bolt-on installation - drilling and purchase of mounting brackets (sold separately) required Made in the USA Specs: Application: tandem-axle trailers with 14" to 15" diameter wheels Dimensions: 72" long x 9" wide x 20-1/2" tall Quantity: 2 fenders Weight: 10 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fender to your old one.
The automotive-grade pads on these brakes offer lasting effectiveness. Both 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 14" to 15" wheels.Features: Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges help minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts included - nuts and lock washers (BRKH10B) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 14", 14-1/2", and 15" Axle rating: 3,500 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
Check grease levels at a glance with the blue auto-check ring. Stainless steel Bearing Buddies maintain light grease pressure inside the hub to protect your bearings, even when submerged, while the zerk fitting makes adding grease quick and easy.Bearing Buddy also includes an automatic pressure-relief feature to help prevent overfilling and damage to the inner seal. Once the hub is full, excess grease seeps around the edges of the piston and into the barrel while the blue auto-check ring remains raised. Check Grease Level with a Quick Glance Check the blue auto-check ring to see when it's time to add grease.
10-3/4" Wide x 72" long x 20-1/2" tall. These sturdy fenders each have a flat back to mount flush with your tandem-axle trailer. Rugged, steel construction. Bolt or weld onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Backing plates add extra protection for the sides of your trailer Close fit keeps dirt from building up between the fenders and trailer 1" Wide outer edge is rounded Sturdy, cold rolled 16-gauge steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Sleek teardrop design offers a clean, stylish look Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 15" to 16" diameter wheels Dimensions: 72" long x 10-3/4" wide x 20-1/2" tall Quantity: 2 fenders Weight: 30 lbs each 1-Year limited warranty Note: Do not use the backing plate to mount the fender to your trailer.
... These sturdy fenders protect your tandem-axle trailer from road debris. 16-Gauge cold-rolled steel with curved edges is durable. Bolt or weld onto your trailer.Features: Rounded fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo 1" Wide inner and outer edges are rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 14" to 15" diameter wheels Dimensions: 60" long x 9" wide x 12" tall Quantity: 2 fenders Weight: 13 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
Enhance your towing experience by expanding your field of vision with these towing mirrors. Custom-fit mirrors slide over your vehicle's factory mirrors to improve sightlines while towing your trailer. Tool-free installation.Installation is a snap - just slide the towing mirror over your OEM mirror and insert the provided arm and hand knob through the back of the mirror housing. Then hook the arm around the inside edge of your OEM mirror. Finally, tighten the hand knob to secure the towing mirror in place.
Free up space on your trailer with this spare tire carrier. It mounts on your trailer's angle-iron railing with the included thread-locking bolt, so there's no drilling required. Sturdy powder coated steel is corrosion resistant.Features: Convenient carrier lets you mount a spare tire on your trailer's angle-iron railing Frees up space for other gear Fits most common bolt patterns and wheels up to 15" Easy installation with included hardware - no drilling required Place angle-iron bracket on the interior of the rail Slide spare tire bracket into angle-iron bracket and bolt them together with thread-locking bolt Use remaining bolts to secure your spare tire Sturdy steel construction with black powder coat finish is rust resistant Specs: Application: 12" to 15" wheels Maximum tire width: 8" Trailer frame dimensions: 1-1/2" - 2" long x 1/8" - 1/4" thick Compatible bolt patterns: 4 on 4 5 on 4-1/2 5 on 5 6 on 5-1/2 8 on 6-1/2 Dimensions of bracket: 8-1/8" wide x 3" tall Distance from outside edge of bracket to trailer railing Minimum: 4-1/2" Maximum: 5" Weight: 4 lbs This spare tire carrier lets you clear up space on your trailer for more gear.
Replace your RVs grab handle with a proper handrail that feels like your staircase at home. The lengthy 54" rail helps stabilize you from the first step. Folds flat against your RV with a sleek, low-profile look that won't obstruct the door.The image above shows obstructions, such as trim around the step well, that will prevent installation. Slide out should be at least 4-1/4" away from the outer edge of the door. This image shows the trim from a slide out is far enough away to allow installation. Windows and awning arms should be at least 2-1/2" from the door frame.
9" Wide x 97" long x 15-1/2" tall. These sturdy teardrop fenders protect your triple-axle trailer from road debris. 16-Gauge, cold-rolled steel is durable. Bolts or welds onto your trailer.Features: Rounded teardrop fenders cover 3 tires on each side of your tri-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo 1" Wide inner and outer edges are rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Sleek teardrop design offers a clean, stylish look Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tri-axle trailers with 14" to 15" diameter wheels Dimensions: 97" long x 9" wide x 15-1/2" tall Quantity: 2 fenders Weight: 19 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
9" Wide x 66" long x 19-3/4" tall. These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer Close fit keeps dirt from building up between the fender and trailer 1" Wide outer edge is rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 14" to 15" diameter wheels Dimensions: 66" long x 9" wide x 19-3/4" tall Quantity: 2 fenders Weight: 19 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
Extend the top receiver on your TorkLift SuperHitch dual-receiver trailer hitch to clear obstacles such as your bed-mounted camper. Exclusive, heavy-duty design maintains a high weight capacity and can be used with a weight distribution system.Measure the camper's overall floor length from the rubber bumpers at the front to the outside edge of the rear bumper. 3. Find the difference between these 2 figures by subtracting. The difference is the length of the extension that you need.
... This sturdy, rounded fender protects your trailer from road debris. 16-Gauge, cold-rolled steel with double-radius edges is durable. Bolt or weld onto your trailer.Features: Rounded fender covers 1 tire on your single-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo 1" Wide inner and outer edges are rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fender to get corrosion protection and to match your trailer's finish Weld-on or bolt-on installation Requires drilling and purchase of mounting brackets (sold separately) for bolt-on installation Made in the USA Specs: Application: single-axle trailers with 8" to 12" diameter wheels Dimensions: 28" long x 7" wide x 10" tall Quantity: 1 fender Weight: 6 lbs 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fender to your old one.
... This sturdy, rounded fender protects your trailer from road debris. Ribbed, 16-gauge steel with double-radius edges is durable. Bolt or weld onto your trailer.Features: Rounded fender covers 1 tire on your single-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo 1" Wide inner and outer edges are rounded Ribbed, 16-gauge, cold-rolled steel is tough and sturdy Prime and paint the fender to get corrosion protection and to match your trailer's finish Weld-on or bolt-on installation Requires drilling and purchase of mounting brackets (sold separately) for bolt-on installation Made in the USA Specs: Application: single-axle trailers with 8" to 12" diameter wheels Dimensions: 25-3/4" long x 7" wide x 10-5/8" tall Quantity: 1 fender Weight: 9 lbs 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fender to your old one.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and protective dust shields. Fits 15" or larger wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Allows for the perfect setting thanks to the fine-tooth star gear Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Protective dust shields keep internal components free from dirt, grime, and road debris E-coat on backing plates fends off rust Adjuster plugs (included) cover access holes Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH122510) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12-1/4" diameter x 3-3/8" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 10,000 lbs Quick Tip: There's really not a whole lot to getting new drum brakes.
Built-in sway control keeps your trailer in line by using specific tension points and steel-on-steel resistance. System head tilt adjustment feature eliminates the need for washers. 2-5/16" Ball and adjustable 2" shank included.Features: Evenly distributes weight over axles of tow vehicle and trailer for improved stability and control Creates a more level ride for both tow vehicle and trailer Integrated 2-point sway control limits side-to-side movement of trailer Brackets keep spring bars in place for a rigid system that holds your trailer in line Steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers No lift chains - eliminates unwanted movement of spring bars Spring bars work with brackets to transfer tongue weight evenly to the tow vehicle Constructed of forged steel Secure in system head with easy-to-use snap pins No-drill, clamp-on brackets mount directly to your trailer frame Desired tilt is easily achieved using pivot point on system head - no more piling on washer after washer Black carbide powder coat finish is durable and corrosion resistant System includes head assembly, 2" x 2" shank, spring bars, sway control brackets, snap-up handle, hitch ball, pins and clips, and all necessary hardware Specs: Tongue weight: 500 lbs - 800 lbs Maximum gross towing weight: 8,000 lbs Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Sway control bracket positioning: minimum of 4" in from end of spring bar Maximum trailer frame dimensions: Height: 6" Width: 4" Overall height: 9-1/2" Holes are spaced 1-1/4" apart on center Maximum drop: 1/2" Maximum rise: 6" Shank measures: 8" From the center of the pin hole to the center of the adjustment holes 7-1/4" From the center of the pin hole to the closest edge of the vertical adjustment shank 9" From the center of the pin hole to the furthest edge of the vertical adjustment shank Spring bar length: 34-7/8" Ball size: 2-5/16" Limited lifetime warranty Included w/ System Required - Sold Separately Optional Add-Ons Adjustable Shank System Head 2-5/16" Hitch Ball 2 Sway Control Brackets 2 Spring Bars Snap-up Handle Hitch Pin and Clip Necessary Installation Hardware n/a n/a Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch.
10-3/4" Wide x 72" long x 20-1/2" tall. These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer Close fit keeps dirt from building up between the fender and trailer 1" Wide outer edge is rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Sleek teardrop design offers a clean, stylish look Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 15" to 16" diameter wheels Dimensions: 72" long x 10-3/4" wide x 20-1/2" tall Quantity: 2 fenders Weight: 20 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
Filters
