Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.If there's too much pressure on the push pad, the lights will turn solid red and blue. Edge the seat back until the lights return to a blinking blue and green. Your final step is to push the setup button. The Patriot will test the brake once and check for any errors.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH12) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16", and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
Keep your RV's interior off-limits with a new entry door lock. It replaces your original Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door lock. The lock can be keyed alike to match other Global Link locks.Features: Locking latch kit lets you secure the entry door on your RV or travel trailer Replaces your Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door latch Helps to keep intruders out and your belongings safe from theft Sturdy steel construction with rust-resistant black powder coat finish Rubberized foam gasket provides tight seal against your door 2 Keys, door edge plate, strike plate, and installation hardware included Lock can be keyed alike to match other Global Link locks To order keyed alike, select "Keyed Alike" from drop-down menu above and enter number of locks in Quantity box Specs: Dimensions: 3.47" wide x 4.28" tall Fits doors that are 1-1/4" to 1-1/2" thick Installs into latch cutouts that are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall 1-Year warranty Note: Lock can be keyed alike to match other Global Link locks.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH10B) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 13", 14", and 15" Axle rating: 3,500 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
This hitch-mounted cargo carrier tilts away from your vehicle - with gear loaded - for easy cargo area access, and it folds up for storage when not in use. The spacious basket has side rails that help contain your cargo and provide tie-down points.Before you tilt the carrier make sure your cargo is strapped down and secure. Simply support the front edge with one hand, remove the pins (standard 5/8" or 16 mm diameter 2" hitch pins) located in the upper and center shank holes, and gently lower the carrier.
Tired of your skis or tires catching on your trailer lip? These plates smooth out the transition so loading's quick and hang-up free. The low-friction surface and traction knobs keep everything gliding steady and safe.Features to know about Take the Jolt Out of Loading The moment your machine hits the bottom edge of your trailer shouldn't feel like a surprise. Edge Glide XL gives you extra room and a smoother path so skis, tires, and gear slide up the ramp instead of catching on the lip.
9-1/8" Wide x 68-3/8" long x 17" tall. These sturdy teardrop fenders protect your tandem axle trailer from road debris. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo 1" Wide inner and outer edges are rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Sleek teardrop design offers a clean, stylish look Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 15" to 16" diameter wheels Dimensions: 68-3/8" long x 9-1/8" wide x 17" tall Quantity: 2 fenders Weight: 16 lbs 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels.Features: Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges help minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH12) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16", and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
9" Wide x 72" long x 20-1/2" tall. These sturdy fenders have a flat back to mount flush with your tandem-axle trailer. Aluminum construction is corrosion resistant. Bolt or weld onto your trailer.Features: Rounded fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Flat mounting flange on inner edge lets you mount fenders flush with your enclosed trailer Close fit keeps dirt from building up between the fenders and trailer 1" Wide outer edge is rounded Rustproof, corrosion-resistant aluminum construction Bolt-on installation - drilling and purchase of mounting brackets (sold separately) required Made in the USA Specs: Application: tandem-axle trailers with 14" to 15" diameter wheels Dimensions: 72" long x 9" wide x 20-1/2" tall Quantity: 2 fenders Weight: 10 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fender to your old one.
Designed for adventurers who spend their weekends on the road or camping in the woods, the Curt cargo carrier has 4 welded support bars that add rigidity to the mesh floor and keep it from warping over time, due to regular use.And we like this one because it also locks the carrier in your hitch Alignment collar ( e98942 ) automatically aligns hitch pin holes Light kit ( e98943-44LED ) keeps you street legal when loaded up Ratchet straps ( e72NR ) secures your gear in the carrier Enclosure cage ( e82FV ) converts basket into an enclosed carrier Cargo bag ( 988501 ) provides weather resistant protection for your gear Specs: Application : 2" x 2" trailer hitch receivers Weight capacity : 500 lbs (or a large grizzly bear) Shank rise : 2-1/2" Side rail height (taken from mesh floor) : 5-1/2" Measurement from center of hitch pin to closest edge of carrier : 11-1/4" Measurement from center of hitch pin to back of carrier : 36-1/2" Dimensions : Interior : 60" long x 24" wide x 5-1/2" deep Exterior : 61-9/16" long x 25-5/8" wide x 8-3/8" tall Weight : 64 lbs (or a full-size, metal shopping cart) Construction : Matte black, E-coated and powder coated steel Warranty : 1-year limited
The automotive-grade pads on these brakes offer lasting effectiveness. Both 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 14" to 15" wheels.Features: Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges help minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts included - nuts and lock washers (BRKH10B) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 14", 14-1/2", and 15" Axle rating: 3,500 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
10-3/4" Wide x 72" long x 20-1/2" tall. These sturdy fenders each have a flat back to mount flush with your tandem-axle trailer. Rugged, steel construction. Bolt or weld onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Backing plates add extra protection for the sides of your trailer Close fit keeps dirt from building up between the fenders and trailer 1" Wide outer edge is rounded Sturdy, cold rolled 16-gauge steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Sleek teardrop design offers a clean, stylish look Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 15" to 16" diameter wheels Dimensions: 72" long x 10-3/4" wide x 20-1/2" tall Quantity: 2 fenders Weight: 30 lbs each 1-Year limited warranty Note: Do not use the backing plate to mount the fender to your trailer.
Enhance your towing experience by expanding your field of vision with these towing mirrors. Custom-fit mirrors slide over your vehicle's factory mirrors to improve sightlines while towing your trailer. Tool-free installation.Installation is a snap - just slide the towing mirror over your OEM mirror and insert the provided arm and hand knob through the back of the mirror housing. Then hook the arm around the inside edge of your OEM mirror. Finally, tighten the hand knob to secure the towing mirror in place.
Free up space on your trailer with this spare tire carrier. It mounts on your trailer's angle-iron railing with the included thread-locking bolt, so there's no drilling required. Sturdy powder coated steel is corrosion resistant.Features: Convenient carrier lets you mount a spare tire on your trailer's angle-iron railing Frees up space for other gear Fits most common bolt patterns and wheels up to 15" Easy installation with included hardware - no drilling required Place angle-iron bracket on the interior of the rail Slide spare tire bracket into angle-iron bracket and bolt them together with thread-locking bolt Use remaining bolts to secure your spare tire Sturdy steel construction with black powder coat finish is rust resistant Specs: Application: 12" to 15" wheels Maximum tire width: 8" Trailer frame dimensions: 1-1/2" - 2" long x 1/8" - 1/4" thick Compatible bolt patterns: 4 on 4 5 on 4-1/2 5 on 5 6 on 5-1/2 8 on 6-1/2 Dimensions of bracket: 8-1/8" wide x 3" tall Distance from outside edge of bracket to trailer railing Minimum: 4-1/2" Maximum: 5" Weight: 4 lbs This spare tire carrier lets you clear up space on your trailer for more gear.
Check grease levels at a glance with the blue auto-check ring. Stainless steel Bearing Buddies maintain light grease pressure inside the hub to protect your bearings, even when submerged, while the zerk fitting makes adding grease quick and easy.Bearing Buddy also includes an automatic pressure-relief feature to help prevent overfilling and damage to the inner seal. Once the hub is full, excess grease seeps around the edges of the piston and into the barrel while the blue auto-check ring remains raised. Check Grease Level with a Quick Glance Check the blue auto-check ring to see when it's time to add grease.
... These sturdy fenders protect your tandem-axle trailer from road debris. 16-Gauge cold-rolled steel with curved edges is durable. Bolt or weld onto your trailer.Features: Rounded fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo 1" Wide inner and outer edges are rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 14" to 15" diameter wheels Dimensions: 60" long x 9" wide x 12" tall Quantity: 2 fenders Weight: 13 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
9" Wide x 97" long x 15-1/2" tall. These sturdy teardrop fenders protect your triple-axle trailer from road debris. 16-Gauge, cold-rolled steel is durable. Bolts or welds onto your trailer.Features: Rounded teardrop fenders cover 3 tires on each side of your tri-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo 1" Wide inner and outer edges are rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Sleek teardrop design offers a clean, stylish look Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tri-axle trailers with 14" to 15" diameter wheels Dimensions: 97" long x 9" wide x 15-1/2" tall Quantity: 2 fenders Weight: 19 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
9" Wide x 66" long x 19-3/4" tall. These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer Close fit keeps dirt from building up between the fender and trailer 1" Wide outer edge is rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 14" to 15" diameter wheels Dimensions: 66" long x 9" wide x 19-3/4" tall Quantity: 2 fenders Weight: 19 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
Extend the top receiver on your TorkLift SuperHitch dual-receiver trailer hitch to clear obstacles such as your bed-mounted camper. Exclusive, heavy-duty design maintains a high weight capacity and can be used with a weight distribution system.Measure the camper's overall floor length from the rubber bumpers at the front to the outside edge of the rear bumper. 3. Find the difference between these 2 figures by subtracting. The difference is the length of the extension that you need.
This aerodynamic Thule roof rack mounts flush on your roof for a sleek, factory look. Crossbars with split rubber strips in top channels work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.Features: Complete roof rack system includes 2 WingBar Edge crossbars, 4 Edge Clamp feet, and a custom fit kit for your vehicle Flush design provides a streamlined, from-the-factory look - crossbars don't extend past feet Aero-style crossbars work with accessories that mount in the top channels or clamp around the bars Compatible with most bike, watersport, snow, and cargo carriers Top channels with split strips let you easily slide accessories into the tracks - no trimming required Strips help reduce wind noise and vibration while you're driving Thule One-Key System locks (sold separately) deter theft of the rack and channel-mount accessories Custom installation on your vehicle's naked roof Specs: Crossbar dimensions: 41" long x 3-1/8" wide x 1" tall 44-1/2" long x 3-1/8" wide x 1" tall Top channel dimensions: 3/4" wide x 1/8" tall x 3/8" opening Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Limited lifetime warranty
This aerodynamic Thule roof rack mounts flush on your roof for a sleek, factory look. Crossbars with split rubber strips in top channels work with channel-mount and clamp-on accessories. Installs to flush rails on your vehicle's roof.Features: Complete roof rack system includes 2 WingBar Edge crossbars, 4 Edge Flush Rail feet, and a custom fit kit for your vehicle Flush design provides a streamlined, from-the-factory look - crossbars don't extend past feet Aero-style crossbars work with accessories that mount in the top channels or clamp around the bars Compatible with most bike, watersport, snow, and cargo carriers Top channels with split strips let you easily slide accessories into the tracks - no trimming required Strips help reduce wind noise and vibration while you're driving Thule One-Key System locks (sold separately) deter theft of the rack and channel-mount accessories Custom installation to the flush rails on your roof Specs: Crossbar dimensions: 37-1/2" long x 3-1/8" wide x 1" tall Top channel dimensions: 3/4" wide x 1/8" tall x 3/8" opening Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Limited lifetime warranty
You take pride in your ride. Your rack should match. The Edge blends sleek design with muscle, hauling e-bikes, road bikes, and everything in between. Spring-loaded hook arms lock in tight, while built-in security keeps your two-wheeled escape safe.Heavyweight Champion Big rides need big support. With an 80-lb weight capacity per bike, the Edge makes room for e-bikes, fat tires, and anything with a bit more heft. Getting to the trailhead takes enough effort, hauling your ride shouldn't.
Tired of your skis or tires catching on your trailer lip? These plates smooth out the transition so loading's quick and hang-up free. The low-friction surface and traction knobs keep everything gliding steady and safe.Take the Jolt Out of Loading The moment your machine hits the bottom edge of your trailer shouldn't feel like a surprise. Edge Glide XL gives you extra room and a smoother path so skis, tires, and gear slide up the ramp instead of catching on the lip.
This edge glide gives you a smooth transition from the ground onto your trailer gate. The glide minimizes friction for snowmobiles but has built-in traction so you can still walk on it safely or load up your favorite off-road toy.Inside Glide Path: GripGlides, LowPro Glides, Multi Glides, and FlexGlides protect your flooring while giving you a track to navigate into and through your trailer. Outside Edge Control: EdgeGlides and Edge Guards make transitions easier and keep your sled from running off your ramp or trailer. Floor and Vehicle Protection: ProTech flooring protects your garage or trailer from carbide runners or studded tracks.
Filters
