Hub-and-drum fits 9K to 10K general-duty Dexteraxles manufactured before July 2009. Inner bearing (387A) and race, outer bearing (25580) and race, oil seal, cap, wheel bolts, and lug nuts included ... made in the USA Specs: Application: 9,000-lb and 10,000-lb general-duty axles Works with axles manufactured before July 2009 Drum dimensions: 12-1/4" diameter x 3-3/8" wide Bolt pattern: 8 on
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and protective dust shields. Fits 15" or larger wheels. bolt Wheel size: 15" or larger Axle rating: 10,000 lbs Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up
Raw finish rotors and calipers and mounting brackets are in this 2-wheel kit. For Dexter or Lippert 10Kaxles with oil bath hubs made prior to 2009 (8-288-3UC1). Fits 16" and 16-1/2" dual ... psi rating of at least 1,500 Specs: Fits: Axle capacity: 9,000 lbs to 10,000 lbs #99 Spindle Axle type: Lippert and Dexter general-duty axles manufactured before July 2009 Hub type: Dexter K08-288-91
Replace the oil/grease cap, O-ring, and plug on your Dexter 9K-10K GD axle or drum. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal particles. Easy access side port ... Features: Replaces the oil bath/grease cap, O-ring, and plug on these axles or drum kit: Dexter 9K-10K GD axles manufactured after 7/2009 Dexter #13G drums manufactured after 7/2009 Direct
Machine-finished rotors and e-coated calipers and mounting brackets are in this 2-wheel kit. For Dexter or Lippert 10K torsion axles with oil bath hubs made prior to July 2009 (8-288-3UC1). Fits ... psi rating of at least 1,500 Specs: Fits: Axle capacity: 9,000 lbs to 10,000 lbs #99 Spindle Axle type: Lippert and Dexter torsion axles manufactured before July 2009 Hub type: Dexter K08-288-91
Replace the oil/grease cap, O-ring, and plug on your 10K-16K Lippert axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal flecks. Side port lets you add or drain ... Features: Replaces the oil bath/grease cap, O-ring, and plug on these axles: Lippert 10K to 16K axles Direct replacement for these Lippert, Dexter, or Valcrum oil caps: Lippert: 693935 Dexter: 21-36
Replace the oil/grease cap, O-ring, and plug on your 10K-16K Lippert axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal particles. Easy access side port lets you ... Features: Replaces the oil bath/grease cap, O-ring, and plug on these axles: Lippert 10K to 16K axles Direct replacement for these Lippert, Dexter, or Valcrum oil caps: Lippert: 693935 Dexter: 21-36
COMING SOON Sept 2025! From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry. the cap or risk damaging your seals. You save time, avoid mess, and lower the risk of improper installation. Specs: Application & Dimension: Axle capacity: Dexter 9K-10K GD axles manufactured after
Hub fits 9K to 10Kaxles manufactured after April 2013. Inner race (382A), outer race (25520), and studs included. Bearings and seals sold separately. construction Specs: Application: Dexter 9,000-lb and 10,000-lb general duty axles Works with axles manufactured after April 2013 Bolt pattern: 8 on 6-1/2" Bearing, Race, and Seal Information Bearings (sold
Replace the oil cap, O-ring, and plug for your Dexter or Valcrum axle. Red retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or drain oil. Aluminum ... Features: Replaces the oil cap, O-ring, and plug for these Dexter and Valcrum axlesDexter: K71-704-99, 021-088-00, or K21-257-00 Valcrum: ST-400D-AM Red retainer ring shields clear viewing lens
Replace the oil cap, O-ring, and plug for your Dexter, Rockwell, Valcrum, or AL-KO axle. Red retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or ... Features: Replaces the oil cap, O-ring, and plug for these Dexter, Rockwell, Valcrum, and AL-KO axlesDexter: K71-859-00, 021-219-00, 021-229-00, or K21-226-00 Rockwell: 12001 Valcrum: ST-375-AM
Replace the oil cap, O-ring, and plug for your Dexter, Valcrum, or Lippert axle. Black retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or drain oil ... Features: Replaces the oil cap, O-ring, and plug for these Dexter, Valcrum, and Lippert axlesDexter: K71-298-00 Valcrum: ST-400L-AM Lippert: 693935 Black retainer ring shields clear viewing lens
COMING SOON Sept 2025! From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry. to remove the cap or risk damaging your seals. You save time, avoid mess, and lower the risk of improper installation. Specs: Application & Dimension: Axle capacity: 10,000-lb to 16,000-lb Thread
Hub-and-drum assembly fits 9K to 10Kaxles manufactured after July 2009. Inner bearing (387A) and race, outer bearing (25580) and race, oil cap with plug and seal, wheel retaining ring, lug nuts, and ... are made in the USA Specs: Application: Dexter 9,000-lb and 10,000-lb general duty axles Works with axles manufactured after July 2009 Wheel size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2 Pilot
Hub-and-drum fits 9K to 10K heavy-duty Dexteraxles with 12-1/4" x 4" brakes. Inner bearing (387A) and race, outer bearing (395S) and race, oil seal, cap, wheel bolts, and lug nuts included ... made in the USA Specs: Application: 10,000-lb heavy-duty axles with 12-1/4" x 4" brakes Bolt pattern: 8 on 6-1/2" Wheel bolt diameter: 5/8" Weight capacity: 5,000 lbs Bearing, Race
Machine-finished rotors and e-coated calipers and mounting brackets are included in this 2-wheel kit. Designed for use on Dexter or Lippert 10,000-lb axles with oil bath hubs made prior to 2009 ... psi rating of at least 1,500 Specs: Fits: Axle capacity: 9,000 lbs to 10,000 lbs #99 Spindle Axle type: Lippert and Dexter general-duty axles manufactured before July 2009 Hub type: Dexter K08-288-91
Self-adjusting electric brakes measure 12-1/4" x 3-3/8". Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.), and AL-KO Dimensions: 12-1/4" diameter x 3-3/8" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 10,000 lbs Limited 1-year warranty Self-Adjusting Brakes
Self-adjusting electric brakes measure 12-1/4" x 3-3/8". Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.), and AL-KO Dimensions: 12-1/4" diameter x 3-3/8" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 10,000 lbs Limited 1-year warranty Self-Adjusting Brakes
Self-adjusting electric brakes measure 12-1/4" x 3-3/8". Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.), and AL-KO Dimensions: 12-1/4" diameter x 3-3/8" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 10,000 lbs Limited 1-year warranty Self-Adjusting Brakes
Replace the oil/grease cap, O-ring, and plug on your 9K-15K axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal flecks. Easy access side port lets you add or drain ... Features: Replaces the oil bath/grease cap, O-ring, and plug on these axles: 9K axles manufactured after October 1, 1989 10Kaxles 12K and 15K heavy-duty axles Direct replacement for these Dexter, or
These brakes automatically adjust as you tow so you don't have to crawl on the ground to do it manually. Dual-plunger cylinder offers great braking power. 12-1/4" x 3-3/8" Assemblies fit 15" or larger wheels. Made in the USA.; diameter x 3-3/8" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 9,000 - 10,000 lbs Limited 5-year warranty Get More Power with Duo Servo Brakes A dual-plunger
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. Dual-plunger cylinder offers great braking power. 12-1/4" x 4" Assemblies fit 16" or larger wheels. Made in the USA. standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12-1/4" diameter x 4" wide Mounting flange bolt pattern: 7 bolt Wheel size: 16" or larger Axle
Filters
