Floats protect your sideboards so you can speed up the time it takes to load and launch without worrying about damaging your boat or personal watercraft. Includes everything you need to install them on your trailer (except tools).Features: Minimizes frustration and speeds up the time it takes to load and launch your boat or personal watercraft Works in cross currents and crosswinds Floats protect your sideboards from damage Bolts to your trailer for easy installation Includes floats, attachment arms, nuts and bolts, trailer plates, and sealant Constructed of injection-molded nylon for durability Made in the USA Specs: Application: trailers for boat or personal watercraft weighing up to 1,500 lbs.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 40" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boatguide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat. The bunk boards then tilt to conform to the boat's hull.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 40" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
Zinc-plated steel U-bolt kit allows you to attach roller-, bunk-, or post-style guide-ons to your boat trailer with a frame up to 3" wide x 5-1/4" tall. Includes 2 sets of mounting U-bolts.Features: Extra-long U-bolts secures a bunk-style, roller-style or post-style guide-on to your boat trailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware is sold separately (8) 3/8"-16 Lock nuts (8) 3/8" Washers Includes 2 sets of mounting U-bolts Made in the USA Specs: Fits: trailer frames up to 3" wide x 5-1/4" tall Length: 6" Length of threads: 2-3/8" Bolt diameter: 3/8" Quantity: 2 sets (4 U-bolts)
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach with U-bolts to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 75-inch-tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you two highly visible targets to guide your boat between for loading.
These guide-on posts make it easy to load your pontoon boat onto your trailer. They attach to the rear of your trailer and extend out of the water, providing a visual target to center the boat's pontoons around. ... When your boat trailer has been backed down the ramp and is partially submerged, these 22" tall guideposts that are mounted at the rear corners of the frame will stick out of the water, giving you two highly visible targets to guide your boat between for loading.
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. ... The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boatguide supports and secure the posts so that the distance between the rollers correctly matches the width of your boat. The rubber roller guides help to center your boat during loading and to hold the boat during transport.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They clamp to the rear of your I-beam trailer frame and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 75-inch-tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you two highly visible targets to guide your boat between for loading.
Aluminum guide-on posts keep your trailer in view when reversing down a boat ramp. Posts also provide markers so you keep your boat centered when loading or unloading it. ... The PVC posts also provide a visual aid to help you back your boat trailer down the ramp when you're unloading your boat. Installation To install the guide-ons, slide the PVC posts over the aluminum support posts.
Bunk-board kit lets you build your own guide-ons to ease loading of your boat onto your trailer. Kit includes 90-degree-angled tubes, brackets, hardware, and enough marine-grade carpet for (2) 69" long 2x4 boards (not included).Features: Bunk-board kit lets you create 2 guide-ons to support your boat and keep it centered while you're loading it onto your trailer 2x4 Lumber for bunk boards not included 90-Degree-angled tubes let you mount the bunks close to your boat Great for narrow boats Bolt-on installation - clamp onto top or bottom of your trailer's frame Pre-galvanized steel construction is sturdy and corrosion-resistant Marine-grade carpeting lines bunk boards to protect your boat's finish 2 Rolls included to cover 2 boards U-bolts, brackets, and mounting hardware included Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/2" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) are required to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Carpeting dimensions (per roll): 11" wide x 12' long Maximum 2x4 length for carpeting: 69" Pre-Galvanized Steel Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized.
Easily load your pontoon boat with these bunk-board-style guide-ons. The boards are covered with marine-grade carpet and their height can be adjusted during installation. ... Features: Bunk-style guides support your pontoon boat and keep it centered while you're loading it onto your trailer Adjustable height provides a good fit for your boat Boards can be installed higher or lower along the posts Support posts clamp onto the top of your channel, box-beam, or I-beam trailer frame Mounting brackets allow you to adjust the distance between posts Galvanized steel construction is sturdy and resists corrosion Hardware included Marine-grade-carpeted boards won't scratch your boat Made in the USA Specs: Quantity: 2 bunk-style pontoon boatguides Application: pontoon boat trailer frames up to 3" wide x 4-1/4" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) can be used to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Bunk board dimensions (each): 24" long x 4" wide x 2" deep Post dimensions: 23" tall x 1-1/2" wide Mounting area is 9-1/2" long Adjustable boatguides can be fine-tuned to work with your boat and your trailer.
This 2-1/2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 5/8" diameter shaft Dimensions: 12" long x 2-1/2" diameter 12243-5 Yates 12" Molded Side Guide Roller - Black Rubber
Zinc-plated steel U-bolt kit allows you to attach 1 roller-, bunk-, or post-style guide-on to your boat trailer with a frame up to 3" wide x 4" tall. Includes 1 pair of mounting U-bolts and required mounting hardware.Features: Extra-long U-bolts secure 1 bunk-style, roller-style or post-style guide-on to your boat trailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware included Made in the USA Specs: Fits: trailer frames up to 3" wide x 4" tall Inside dimensions: 5" long x 3-1/2" wide Bolt diameter: 3/8" Quantity: 1 set (2 U-bolts) Included mounting hardware: (4) 3/8"-16 Lock nuts (4) 3/8" Washers
These guide-on posts help you confidently load your boat onto your trailer and back your trailer down the ramp, tilting up to 70 degrees to accomodate your boat's wider hull. ... Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Assists you in backing your trailer down the boat ramp 70-Degree tilt accomodates your boat's wider hull 16-Gauge, pre-galvanized steel posts are strong and durable White PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 40" Steel post dimensions: 18" tall x 1-1/2" diameter PVC pipe diameter: 2-3/8" Bend angle: 70 degrees Quantity: 2 boatguide-ons
This 2-1/2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 1/2" diameter shaft Dimensions: 12" long x 2-1/2" diameter 12243-4P Yates 12" Molded Side Guide Roller - Black Rubber
Loading your fishing or jon boat at a busy ramp can be tricky, but this side guide roller helps every time. Mounted along your trailer, it gently centers your boat for smooth loading, so you can skip the struggle and get off the water faster.Protects Hull Contact Surface: Polyurethane roller reduces marking during loading. Spins Under Load To GuideBoat Position: Roller spins to guideboat along trailer path. Works With Standard Roller Brackets: Fits 1/2" diameter shaft mounting setups.
Dutton-Lainson guide-on roller for boat trailers.Features: Roller made of solid, high grade rubber 2-1/2" Diameter x 12" long guide-on roller Fits 5/8" shaft 21554 Boat Trailer Guide-On Roller, 2-1/2" Diameter x 12"Long Model 6334 by Dutton-Lainson
This 2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 1/2" diameter shaft Dimensions: 9" long x 2" diameter 9202-4 Yates 9" Molded Side Guide Roller - Black Rubber
This 2" diameter roller replaces one of your boat trailer's guide rollers. Made of durable rubber material.Features: Replaces 1 side guide roller on your boat trailer (sold separately) Eases loading and unloading of boat by helping to guide the boat into place Mounts along the side of your trailer Constructed of heavy-duty rubber Made in the USA Specs: Application: bracket with 1/2" shaft Dimensions: 9" long x 2" diameter
This 2-1/2" diameter roller replaces one of your boat trailer's guide rollers. Made of durable rubber material.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat by helping to guide the boat into place Mounts along the side of your trailer Constructed of heavy-duty rubber Made in the USA Specs: Application: bracket with 1/2" shaft Dimensions: 12" long x 2-1/2" diameter
These guide-on posts help you confidently load your boat onto your trailer and back your trailer down the ramp, tilting up to 70 degrees to accomodate your boat's wider hull. ... Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Assists you in backing your trailer down the boat ramp 70-Degree tilt accomodates your boat's wider hull 16-Gauge, pre-galvanized steel posts are strong and durable Black PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 40" Steel post dimensions: 18" tall x 1-1/2" diameter PVC pipe diameter: 2-3/8" Bend angle: 70 degrees Quantity: 2 boatguide-ons
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 60" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boatguide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat. The bunk boards then tilt to conform to the boat's hull.
Filters
