Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey George, we do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following: Bearings #L68149…
view full answer...The Replacement Converter #PD4655V is the correct converter for your Parallax 7355 power center. I do not see that WFCO shows their 8955PEC being acceptable to use with your Parallax 7355.
view full answer...Hi Nick, unfortunately we don't have anything with bolt holes that are 9-3/4" apart on center, just 9-1/2" apart, so you may want to measure to get as exact as possible. Also, does your axle have a number on it, either 10 or 11, just…
view full answer...Hey Jerry, great question! Yes, if you found another slide out that is rated for only 5,000 RPM then you'll be cutting the movement of the slide just about in half. The Lippert Venture Actuator and High Speed Slide-Out Motor #LC168956 that…
view full answer...The Replacement Lithium Converter for Progressive Dynamics 4500 Series RV Power Control Center #PD4575LICSV that you referenced is a dual fan setup.
view full answer...Hi Gary; it looks like your PD4575K18LS8 is a slightly older model from before they added the output mode switch. It is very clear that it is not there from your picture. Since there is no way to add the switch you have two options to make it lithium…
view full answer...Since you're wanting to replace just the converter section of your power center with a lithium compatible converter you'll want to use the Replacement Lithium Converter for Progressive Dynamics 4500 Series RV Power Control Center - 75 Amp…
view full answer...Since all you are needing to replace is the converter for your Progressive Dynamics PD4575K18L, you will need the Replacement Lithium Converter for Progressive Dynamics 4500 Series item #PD4575LICSV. This converter will replace your 75 amp PD457518L…
view full answer...The only storage bag we currently carry that will fit the Mighty Cord RV Power Cord #A10-5036EDBK is going to be the Bulldog Winch Camo Mesh Duffle Storage Bag #BDW20388. We also offer the MORryde Manual Storage Reel #MR47RR, which you could mount in…
view full answer...We have received multiple reviews from our users who have verified they were able to fit their 50', 50-amp RV power cords on the MORryde Manual Storage Reel #MR47RR. I have also included an image below which shows how much room is left on the…
view full answer...You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…
view full answer...Thank you for including a photo of your 2003 Suburban 1500 and hitched Jayco toy hauler trailer. If your Suburban's suspension is still in good working order and not suffering sag from simply being well worn, and if the vehicle is being used…
view full answer...Filters
- 1129 results