4" x 1-1/2" Rectangle. Incandescent trailer light serves as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 2-Wire design. ... Features: Rectangular trailer light functions as either a side marker or clearance light when properly mounted Built-in reflex reflector removes the need for a separate reflector Incandescent bulb can be easily replaced Durable ABS plastic base Red snap-on lens over incandescent bulb Compatible with 12V DC electrical systems Surface mount on trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Overall dimensions: 4" long x 1-1/2" tall x 15/16" deep Distance between mounting holes (center on center): 3" Bulb type: 194 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Bargman # 30-99-001 P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
4" x 1-1/2". Incandescent trailer light serves as either a side marker light or clearance light when properly mounted. Built-in reflex reflector. Snap-on lens. Surface mount to trailer - hardware not included. 2-Wire design. ... Features: Incandescent trailer light functions as a clearance light or side marker light when properly mounted Built-in reflex reflector removes the need for a separate reflector Incandescent bulb can be easily replaced Durable ABS housing with snap-on lens Amber lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire design includes power lead and ground wire P2 rated Specs: Dimensions: 4" wide x 1-1/2" tall x 15/16" thick Distance between mounting holes (center on center): 3" Bulb type: 194 Power draw at 12.8V: 0.4 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Bargman # 30-99-002 P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Replaces a damaged red series #37 light module for your Bargman ID light bar (31-99-215). Sealed, waterproof module has a red lens and an incandescent bulb.Features: Replaces a damaged Series #37 red incandescent light module for your Bargman waterproof ID light bar (31-99-215) Sealed, waterproof module Red lens Incandescent bulb Dimensions: 2-15/16" long x 1-1/8" tall x 7/8" deep Includes 1 replacement light module
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. ... Features: LED trailer light functions as a clearance light or side marker light when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Amber lens over white LEDs Compatible with 12V DC systems Stud mounts to trailer with included stud and stainless steel base 1-Wire design grounds through mounting hardware P2 rated Specs: Dimensions: 2-1/8" long x 1-1/8" wide x 1-1/16" deep Lead wire: 20" long Diodes: 3 Power draw at 12.8V: 0.051 amps Lifetime LED warranty Manufacturer Cross Reference Light will work as an exact replacement for: Bargman # 42-99-402 Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. ... Features: LED trailer light functions as a clearance light or side marker light when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red lens over white LEDs Compatible with 12V DC systems Stud mounts to trailer with included stud and stainless steel base 1-Wire design grounds through mounting hardware P2 rated Specs: Dimensions: 2-1/8" long x 1-1/8" wide x 1-1/16" deep Diodes: 3 Power draw at 12.8V: 0.051 amps Lifetime LED warranty Manufacturer Cross Reference Light will work as an exact replacement for: Bargman # 42-99-402 Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with white base. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
... It installs easily and covers all your essential lighting needs.Features: Trailer light kit designed to provide complete lighting for trailers under 80" wide Includes tail lights, side marker lights, wiring harness, and license bracket Provides all required lighting and reflectors for DOT compliance 20&' Trailer harness allows full trailer connection License bracket made of corrosion-free black plastic that flexes on impact Mounting hardware and installation instructions included Easy installation for complete setup Includes 1 complete trailer light kit Specs: Application: Trailers under 80" wide Tail light dimensions: 4-3/4" x 4-1/2" Harness length: 20' Light colors: Red, white, amber
Need a reliable marker light for your setup? This amber incandescent light provides steady visibility with a built-in reflector for added safety. It installs easily and fits standard mounting patterns for a simple replacement.Features: Incandescent marker light designed for clearance and side marker applications P2 oblong design with built-in reflex optics for added visibility Amber light with black base for a clean, standard look Single-bulb socket provides consistent illumination Single-lead wire with grounding through mounting screw Weather-resistant construction for durability Easy installation for quick replacement Includes 1 marker light Specs: Color: Amber Base color: Black Shape: Oblong Dimensions: 4-1/16" x 2-1/16" Voltage: 12 V Mounting: 3" centers Light type: Incandescent
... Red light.Features: Oblong trailer tail light serves 3 functions Stop light Tail light Turn signal light Smoked lens works great with blacked-out style on vehicles or trailers Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Mounts on surface with built-in black flange - hardware not included 3-Wire pigtail DOT compliant Specs: Overall dimensions: 12-5/8" long x 1" tall x 1/2" deep Mounting holes: 11-3/4" apart on center Weight:.44 lbs Diodes: 9 Voltage: 12V Amp draw: Tail: 0.01A Stop: 0.2A Lifetime LED warranty
6-1/2" x 2-3/8" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. ... Mounting hardware is used to secure the light to the trailer.
15-1/2" Long x 1" tall x 1/2" thick ID light bar. Waterproof LED identification light bar with integrated utility light for trailers. Polycarbonate lenses and base. Surface mount. ... P2-Rated Light A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! ... This beam pattern makes the light visible from the front and both sides, enhancing visibility and safety. When properly installed, it functions as both a front clearance light and a side marker light or as a rear clearance light and a side marker light.
4" Round waterproof LED trailer light with 24 diodes provides stop, turn, tail, and back-up functions. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). ... LEDs vs. Incandescent Lights The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent vehicle and trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 15" long x 1-1/16" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 15 Voltage: 12V Power draw: 0.29 amps Lifetime warranty on LEDs Quantity: 1 light bar
Incandescent vanity light brightens up your RV bathroom mirror for your pre-hike morning ritual. Acrylic light shade has a stylish white swirl design that softens the glare of the bright light. ... The frosted white glass light shades softens the glare of the light a bit so it's not quite so blinding. Surface-Mount, Bolt-On Installation is Easy This vanity light is easy to install as an upgrade or a replacement of your existing light.
7-1/8" Incandescent transit light acts as a brake and tail light. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal against moisture.Features: Round stop/tail light Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surface mount - hardware not included Power lead and ground wire connect to your vehicle Specs: Dimensions: 7-1/8" diameter x 2-3/16" thick Distance between mounting holes (center on center): 6-1/4" Compatible with 12V DC systems Bulb type: 1157 Power draw at 12.8 volts: Stop: 2.4 amps Tail: 0.5 amps 3-Year warranty
Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! ... This beam pattern makes the light visible from the front and both sides, enhancing visibility and safety. When properly installed, it functions as both a front clearance light and a side marker light or as a rear clearance light and a side marker light.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. ... Features: Oval trailer tail light serves 4 functions Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights GloLight lens creates a solid circle of light with a smooth appearance Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens with red and white LEDs Red LEDs for tail light White LEDs for backup light Mounts on surface of trailer with built-in black flange - hardware not included Hardwired with 2 female PL-3 plugs for standard connections DOT compliant Specs: Overall dimensions: 7-1/2" wide x 3-1/4" tall x 3/4" deep Light face dimensions: 6-1/2" wide x 2-1/4" tall Diodes: 22 Power draw at 12.8 volts: 0.46 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
15-9/16" L x 1-3/16" W x 1-5/16" D; Three separate lights on the base; lights have replaceable lenses and bulbs; surface mount on 6-1/8" centers; 1-wire; total of 3 incandescent bulbsThis red three light bar measures 15-9/16" long x 1-3/16" wide x 1-5/16" deep. Light bar contains three separate, replaceable MC68RB lights on a white base.
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 20-1/2" long x 1" wide x 3/4" thick Distance between mounting holes: 19-5/8" Diodes: 21 Voltage: 12V Power draw: Stop/turn: 0.265 amps Tail: 0.24 amps Reverse: 0.30 amps Lifetime warranty on LEDs
This red and white GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts in a cutout using a grommet (sold separately). Works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer band glows for tail light Center flashes for turn signal Both brighten for brake light Waterproof - great for boat trailers White LEDs with red and clear lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) PL-3 connector works with standard 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Compatible with 12V DC systems Diodes: 22 Power draw at 12.8 volts: Tail light: 0.259 amps Brake and turn signal light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need?
3/4" Round. Waterproof mini trailer light functions as both a clearance light and a side marker light when properly mounted. 2 Amber LEDs create a smooth, bright circle of light. ... When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and a side marker light.
Filters
