Level your trailer in minutes with no stacking or guesswork - just drive on. Adjusts from 1/2" to 4" and supports up to 30,000 lbs. Includes 2 levelers, 2 chocks, and a carry bag.The Andersen Camper Leveler lets you drive on until your trailer is perfectly level, then secure the wheel with the included chock. It's fast, intuitive, and accurate - perfect for setting up while solo.
This tire change kit makes swapping out a flat on your multi-axle trailer a total breeze. Just drive the good tire up onto the leveler to raise the adjacent tire up to 4" off the ground. You will be back on the road in no time.
Raise your trailer quickly and effectively with the Rapid Jack from Andersen Manufacturing. Simply drive your trailer onto the jack for a quick boost. Also functions as a leveler for single-axle trailers and as a trailer jack base.
Adds 8" of height to reduce jack strain. Each block holds 6,000 lbs and has a magnetic base that sticks to your jack pad. Stackable, nestable, and stable, this 6-pack is built for full trailer support.Features to know about Reduce Jack Cranking: Adds 8" of Height Instantly No more cranking your jack forever to reach the ground. Each Andersen trailer jack block adds 8" of lift, reducing wear on your jack and saving you time during setup and teardown. Better Stability on All Terrain: Wide, Flat Base Keep your trailer from rocking while parked.
Don't say goodbye to your truck bed. Instead, say hello to the Ranch Hitch fifth-wheel-to-gooseneck coupler adapter. It offers 24,000 lbs towing capacity with 3" vertical adjustment for towing a fifth-wheel trailer with a gooseneck hitch.Back your truck into position as if you were hooking up your fifth-wheel trailer, making sure that the truck and trailer are level. Measure from the pin plate (the bottom of the pin box) down to the top of the ball in the bed of your truck. The measurement should fall between 11-3/4" and 14-3/4".
Don't say goodbye to your truck bed. Instead, say hello to the Ranch Hitch fifth-wheel-to-gooseneck coupler adapter. The 8" offset allows more clearance between truck and trailer for short-bed trucks. 24,000 lbs GTW and 6,000 lbs TW.Back your truck into position as if you were hooking up your fifth-wheel trailer, making sure that the truck and trailer are level. Measure from the pin plate (the bottom of the pin box) down to the top of the ball in the bed of your truck. The measurement should fall between 11-3/4" and 14-3/4".
This trailer jack block makes leveling and stabilizing your RV or trailer simple. No more wrestling with wobbly jacks or stacking sketchy wood blocks. It's lightweight, sturdy, and takes the hassle out of setting up your campsite.
Avoid the hassle of wrestling with spring bars! Just hook up this easy-to-use alternative to the traditional weight-distribution system. Unique, patented system uses lightweight urethane springs to distribute weight and control sway.These bars are heavy and usually have to be pried into place. In contrast, Andersen's patented True Motion-Dampening weight-distribution hitch uses two bushing-like springs made of urethane. The urethane springs provide a much smaller and lighter way to create the force that is needed to level your tow vehicle and trailer.
This trailer jack block makes leveling and stabilizing your RV or trailer simple. No more wrestling with wobbly jacks or stacking sketchy wood blocks. It's lightweight, sturdy, and takes the hassle out of setting up your campsite.
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 5-1/2" drop and 6-1/2" rise with the Rapid Hitch ball mount system. Includes greaseless aluminum ball combo (2" and 2-5/16"). Fits 2" hitches.
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 5-1/2" drop and 6-1/2" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (2" and 2-5/16"). Fits 2" hitches.
Replace a worn shank on your Andersen WD or EZ HD hitch. Slides into your 2-1/2" receiver and gives 6" rise or drop for a level tow. Shank only - hardware not included. ... Features: Direct replacement shank - slides into your vehicle's 2-1/2" receiver Fits Andersen systems - works with Andersen Weight Distribution Hitch models and the Andersen EZ HD combo ball setup Level your setup fast - gives you 6" drop or 6" rise to match your trailer height Shank only - no additional hardware included Built for real towing - meets V5 and SAE J684 certifications Made in the USA Specs: Application: Andersen Weight Distribution Hitch models and Andersen EZ HD combo ball Receiver size: 2-1/2" Rise: 6" Drop: 6" Maximum towing capacity: up to 16,000 lbs Maximum tongue weight: up to 1,500 lbs
Tow up to 8,000 lbs with supreme safety and the convenience of an adjustable 5-1/2" drop and 6-1/2" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (1-7/8" and 2"). Fits 2" hitches.
Tow multiple trailers with ease. The greaseless dual-ball combo gives you 2" and 2-5/16" balls and 6" of drop/rise adjustability keep you level, clean, and ready for whatever the road throws your way.High towing capacity: Up to 12,500 lbs with the 2-5/16" ball. Features to know about Adjustable Height for Level Towing The Andersen Rapid Hitch offers a 6" drop or rise, allowing you to adjust your hitch to the perfect height for level towing, enhancing safety and performance.
This adjustable ball mount offers up to a 10" drop and an 11" rise. Fits 2" hitches. Tow up to 10,000 lbs with the 2-5/16" ball and up to 8,000 lbs with the 2" ball. Greaseless ball combo makes for mess-free towing.
Tow up to 8,000 lbs with supreme safety and the convenience of an adjustable 10" drop and 11" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (1-7/8" and 2"). Fits 2" hitches.
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 3-1/2" drop and 4-1/2" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (2" and 2-5/16"). Fits 2" hitches.
Tow up to 10,000 lbs with supreme safety and the convenience of an adjustable 4" drop and 4" rise with the Rapid Hitch ball mount system. Includes zinc-plated steel ball combo (2" and 2-5/16"). Fits 2" hitches.
Replace a worn shank on your Andersen WD or EZ HD hitch. Slides into your 2-1/2" receiver and gives 4" rise or drop for a level tow. Shank only - hardware not included. ... Features: Direct replacement shank - slides into your vehicle's 2-1/2" receiver Fits Andersen systems - works with Andersen Weight Distribution Hitch models and the Andersen EZ HD combo ball setup Level your setup fast - gives you 4" drop or 4" rise to match your trailer height Shank only - no additional hardware included Built for real towing - meets V5 and SAE J684 certifications Made in the USA Specs: Application: Andersen Weight Distribution Hitch models and Andersen EZ HD combo ball Receiver size: 2-1/2" Rise: 4" Drop: 4" Maximum towing capacity: up to 16,000 lbs Maximum tongue weight: up to 1,500 lbs
Replace a worn shank on your Andersen WD or EZ HD hitch. Slides into your 2-1/2" receiver and gives 8" rise or drop for a level tow. Shank only - hardware not included. ... Features: Direct replacement shank - slides into your vehicle's 2-1/2" receiver Fits Andersen systems - works with Andersen Weight Distribution Hitch models and the Andersen EZ HD combo ball setup Level your setup fast - gives you 8" drop or 8" rise to match your trailer height Shank only - no additional hardware included Built for real towing - meets V5 and SAE J684 certifications Made in the USA Specs: Application: Andersen Weight Distribution Hitch models and Andersen EZ HD combo ball Receiver size: 2-1/2" Rise: 8" Drop: 8" Maximum towing capacity: up to 16,000 lbs Maximum tongue weight: up to 1,500 lbs
This all-steel, adjustable ball mount lets you tow up to 10,000 lbs with the 2" ball, 14,000 lbs with the 2-5/16" ball, and offers the convenience of a 8" drop or 8" rise. Fits 2" trailer hitches.
Get the height your setup needs with this 8" square coupler tube for your Andersen Ultimate Connection. Extra height helps level your setup, improve clearance, and deliver the smooth towing experience you're after. ...
Kit replaces your heavy fifth-wheel hitch with a lighter frame that is easier to install and remove and a raised gooseneck ball. Converts your king pin into a gooseneck coupler. Installs on industry-standard fifth-wheel rails (sold separately).
Filters
