... Grab your drill, drop the leg, and lift the trailer without breaking a sweat. When it's time to tow, the jack swings up and stays out of the way.Highlights Drill-Powered Operation: Raise and lower the jack using a standard cordless drill. One-Handed Drop Leg Adjustment: Quick-release handle drops the leg fast and cuts down how much you have to crank.
Mount this extra-large footpad on your stabilizing jack to help prevent sinking and achieve a more stable setup. Threaded attachment point lets you fine-tune height. Supports up to 6,000 lbs.Features: Extra-large footplate helps to prevent sinking Replaces existing jack foot Greater surface area than standard footpads provides increased stability Adjustable design allows you to fine-tune height Threaded bolt lets you raise or lower foot to achieve perfect height Great for leveling Perfect for most stabilizer jacks and landing gear used on 5th-wheel trailers and RVs Durable, 7-gauge steel construction Reinforced edges will not bend Specs: Dimensions: 8" long x 5-3/4" wide Weight capacity: 6,000 lbs Lifetime warranty
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. ... Features: Power stabilizer jacks provide an easy way to upgrad to power leveling New motor is 2x faster than previous versions Legs extend up to 30" for quick leveling New embossed legs add strength Automatically adjusts to the terrain so uneven ground is not a problem Motor indepently controls both legs for more control Switch kit allows you to easily retract and extend the jacks with the flip of a switch Heavy-gauge steel construction ensures durability Lighter weight than previous models Black powder coat finish stands up to the elements and resists corrosion Front and rear mounting applications available for maximum stability Specs: Overall dimensions: 78" long x 20" wide x 4-3/4" tall Lift: 30" Motor: 12-volt DC Mounting hole spacing: 68-11/16" from center-hole to center-hole Includes a 6 amp auto-reset circuit breaker 1-Year limited warranty
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability.
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. ... Its adjustable design allows for maximum clearance, drastically reducing the potential for damaging hang-ups. The jack also features an outer tube that extends to provide extra lift.
This heavy-duty jack leg is ready to get back on the job site! Front-facing plunger pin is easy to reach when using the adjustable drop leg. Lifts 5 tons supported by a strong carbon steel frame. ... Features: Spring return retracts the jack hands-free Drop leg extension makes up about half of the total travel Cuts time spent cranking, adjusting, and leveling in half Easily-accessible front-facing plunger pin Helps to avoid reaching under the nose of your trailer frame to use the drop legs Works best if you have open space between your trailer and your truck Weather-resistant black paint coat finish Carbon steel construction Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes standard footplate and sidewind crank Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Lift: 12-3/8" Drop leg adjustment: 15" Total adjustment: 27-3/8" Overall height: Retracted: 27-1/2" Extended: 54-1/2" Outer tube width: 4" Inner tube width: 3-3/4" Distance between drop leg adjustment holes: 3-3/8" on center Number of adjustment holes: 5 Foot plate dimensions: 8-1/2" x 8-1/2" How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 5,000 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack. Drop Leg Adds Reach: Extends up to 9-3/4" and adjusts in 2" increments to reduce jack travel during setup.
Upgrade a heavy trailer with a 20K tandem hydraulic jack system. Two 12K legs share one 12V pump for powered lifting with 24" of lift, plus a manual override gives you a backup if the trailer loses power.The system calls for at least 4-gauge battery cable and a solid ground through the steel mounting structure or a separate frame ground. The adjustable B-brackets are designed around trailer frame sections from about 3-5/8" to 5-1/2" wide, and the jacks can also mount directly to the frame when your trailer layout calls for it.
Upgrade a heavy trailer with a 20K tandem hydraulic jack system. Two 12K legs share one 12V pump for powered lifting with 24" of lift. Complete install hardware is included; this setup does not provide side-to-side leveling.The system calls for at least 4-gauge battery cable and a solid ground through the steel mounting structure or a separate frame ground. The adjustable B-brackets are designed around trailer frame sections from about 3-5/8" to 5-1/2" wide, and the jacks can also mount directly to the frame when your trailer layout calls for it.
Pull in, drop the jack, and adjust your height without slowing down. Use a drill for quick changes, then switch to the crank when you need full 10,000 lb lifting power. ... That larger footprint helps reduce sinking in loose dirt or mud, so the jack has a better base to work from. Specs Capacity: Static load capacity: 10,000 lbs Mounting: Mount style: Direct weld Height Adjustment: Lift: 14-1/2" Drop leg adjustment: 13-3/8" in 3-3/8" increments Total adjustment: 27-7/8" Total retracted height: 25-1/2" Total extended height: 53-1/2" Tube Dimensions: Outer tube dimensions: 3-3/16" x 3-3/16" Inner tube dimensions: 2-3/4" x 2-3/4" Leg dimensions: 2-3/8" x 2-3/8"
When you're hitching up, you don't want to crank forever or stack blocks to get the height right. The drop leg gets you close fast, and the side-wind handle keeps your hands clear so you're not banging your knuckles while you crank.Specs Capacity: Static support capacity: 7,000 lbs Lift capacity: 1,800 lbs Dimensions: Retracted height: 23-1/2" Adjustable height range: 23-1/2" to 51" Lift: 14" Drop leg adjustment: 15" Total adjustment: 29" 24" tall x 10" wide x 8" deep Weight: 22 lbs Warranty: 1-year limited
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 3,500 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack. Drop Leg Adds Reach: Extends up to 9-3/4" in 2" increments to reduce jack travel during setup.
Pull the front-facing plunger pin to release the drop leg for 13-1/2" of manual adjustment. The jack provides 12-3/8" of lift, while a durable screw and built-in grease zerk help ensure smooth, reliable operation. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg, adding 13-1/2" of manual adjustment to 12-3/8" of lift. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg adds 13-1/2" of manual adjustment to 15-1/4" of lift. ... Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability.
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg adds 13-1/2" of manual adjustment to 15-1/4" of lift. ... Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.For example, if your trailer (plus gear) weighs 30,000 lbs, your tongue weight will be 3,000 - 4,500 lbs. Just make sure your jack's rated for at least that much. Its fine to go bigger, as a higher-capacity jack often makes lifting easier. Specs: Capacity and Lift: Maximum capacity: 3,500 lbs Lift: 18" Drop leg adjustment: 4-1/2" Total adjustment: 22-1/2" Motor and Power: 12V electric motor Direct-wire pigtails (connects to trailer or vehicle power) LED work light Construction and Dimensions: Outer tube: 2-1/4" steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: removable, solid steel Drop leg: adjustable in 1-1/2" increments, up to 4-1/2" extra height Motor housing: black ABS plastic Included Accessories: Manual backup handle Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts Warranty: 2-Year
Level and lift a heavy trailer with two 12K hydraulic legs, each powered by its own 12V pump. Independent controls let you adjust either side separately, while manual overrides give you a backup if the trailer loses power.Either pump can also be relocated if your trailer layout calls for a different position; longer hydraulic hoses are required and sold separately. Fit the Brackets to Your Trailer Before You Drill The adjustable B-brackets are designed around trailer frame sections from about 3-5/8" to 5-1/2" wide. They can bolt through a vertical bulkhead frame section, or the jacks can mount directly to the frame when your trailer layout calls for it.
Pull in, drop the jack, and adjust your height without slowing down. Use a drill for quick changes, then switch to the crank when you need full 14,000 lb lifting power. ... That larger footprint helps reduce sinking in loose dirt or mud, so the jack has a better base to work from. More Adjustment for Campsites and Driveways Trailer height is not always where you want it when it is time to hitch up.
Level and lift a heavy trailer with two 12K hydraulic legs, each powered by its own 12V pump. Independent controls let you adjust either side separately, while 24" of lift and a 24K combined capacity handle demanding trailers.Either pump can be relocated if your trailer layout calls for a different position; longer hydraulic hoses are required and sold separately. Fit the Brackets to Your Trailer Before You Drill The adjustable B-brackets are designed around trailer frame sections from about 3-5/8" to 5-1/2" wide. They can bolt through a vertical bulkhead frame section, or the jacks can mount directly to the frame when your trailer layout calls for it.
Ratcheting jack lets you inch your trailer into tight spaces. Designed in Australia to stand up to the rigors of the Outback. Easily tracks through mud and gravel and offers great rust protection. 10" lift and 7-11/16" drop leg.Easily Move Your Trailer in Tight Quarters The ratcheting feature on this jack lets you move your trailer in small, precise increments, which is ideal when working in tight spaces like your garage. Two of the three knobs located at the base of the jack allow you to adjust the direction of the wheel.
Stable, ratcheting jack lets you inch your trailer into tight spaces. Designed in Australia to stand up to the rigors of the Outback. Easily tracks through mud and gravel and offers great rust protection. 10" lift, 5-1/2" drop leg.Easily Move Your Trailer in Tight Quarters The ratcheting feature on this jack lets you move your trailer in small, precise increments, which is ideal when working in tight spaces like your garage. Two of the three knobs located at the base of the jack allow you to adjust the direction of the wheels.
Tired of cranking your stabilizers by hand? This single leg stabilizer kit lets you use a power drill to get set up faster, giving you a quick and easy way to steady your RV so you can spend more time relaxing at your campsite.Use the Included Drill Adapter: 3/4" drill adapter works with a non-impact drill for quick operation. Set the Leg for Better Support: Adjustable leg lets you set the proper height and angle. Crank Manually if Needed: Manual operation is available with crank LC285324, sold separately.
Filters
