Lets you use your motorhome-mounted Blue Ox tow bar with your off-road bumper. Bumper must have 7/8" D-rings. Works with Aladdin, Alpha, Allure, Ascent, Avail, and Aventa LX tow bars.Specs: Quantity: 2 adapter brackets Pin diameter: 7/8" Weight capacity: 10,000 lbs Will also work with the Apollo tow bar, but will lower max weight capacity to 10,000 lbs. 1-Year warranty Features: Lets you use your motorhome-mounted Blue Ox tow bar with your off-road bumper Fits flat-tow-rated off-road bumpers with D-rings with 7/8" openings Works with Aladdin, Alpha, Allure, Ascent, Avail, and Aventa LX tow bars Includes 2 adapters with required pins, clips, washers, and lock nuts Made in the USA Fits: Off-road bumpers rated for flat towing with 7/8" D-rings Note: Off-road bumper must be rated for flat towing.
Lets you use your motorhome-mounted Blue Ox tow bar with your aftermarket off-road bumper. Bumper must have 1" D-rings. Works with Aladdin, Alpha, Ascent, Avail, and Aventa LX tow bars.Specs: Quantity: 2 adapter brackets Pin diameter: 1" Weight capacity: 10,000 lbs Will also work with the Apollo tow bar, but will lower max weight capacity to 10,000 lbs. 1-Year warranty Features: Lets you use your motorhome-mounted Blue Ox tow bar with your off-road bumper Fits flat-tow-rated off-road bumpers with D-rings with 1" openings Works with Aladdin, Alpha, Ascent, Avail, and Aventa LX tow bars Includes 2 adapters with required pins, clips, washers, and lock nuts Made in the USA Fits: Off-road bumpers rated for flat towing with 1" D-rings Note: Off-road bumper must be rated for flat towing.
5-Way Flat to 7-Way RV Blade Adapter - Wired This is an adapter that converts the tow vehicle's 7-way blade connector into a 5-way flat pin connector. This model has a short length of wire joining the two connectors. 16" Long Converts a 7-way blade connector into a 5-way flat pin connector
Adapter converts from 4 pole wiring on vehicle to 6 pole round plug and 4 pole flat. Additional wire leads for brake and an accessory. 4 Pole to 6 pole and 4 pole vehicle side trailer wiring adapter Includes mounting bracket Includes 3 wire leads Blue - for electric brakes - center pin Red - for auxiliary or hot lead - outside pin White - for the ground Note: The white wire must be grounded to the vehicle frame.
Adapts your 1-1/4" hitch receiver for use with 2" accessories. Gain extra ground clearance with 5" rise or 4-1/4" drop. ... Do not use this hitch adapter in towing applications.
You're ready to flat tow, but the hitch on your RV doesn't line up with your towed vehicle. That's where this adapter comes in. Flip it for a 4" rise or drop, slide it into place, and everything is where it needs to be.That means no more than 3" above level or 3" below. If it's outside that range, this adapter provides the rise or drop needed to bring it back in line. It's built for flat towing only, so don't use it to pull a trailer.
You're ready to flat tow, but the hitch on your RV doesn't line up with your towed vehicle. That's where this adapter comes in. Flip it for a 2" rise or drop, slide it into place, and everything is where it needs to be.That means no more than 3" above level or 3" below. If it's outside that range, this adapter provides the rise or drop needed to bring it back in line. It's built for flat towing only, so don't use it to pull a trailer.
Adapter lets you use your 2" hitch-mounted accessories with your 1-1/4" x 1-1/4" trailer hitch receiver. Sturdy steel is powder coated for corrosion resistance. ... Do not use this hitch adapter in towing applications.
Adapter lets you use your 1-1/4" hitch-mounted accessories with your 2" x 2" trailer hitch receiver. Sturdy steel is powder coated for corrosion resistance. ... Features: Reduces your 2" trailer hitch receiver to a 1-1/4" receiver so that you can mount a bike rack, cargo carrier, or other 1-1/4" hitch accessory Durable steel with matte black powder finish and e-coat that resists corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitch receivers Receiver size: 1-1/4" x 1-1/4" Maximum tongue weight: 350 lbs Overall length: 9" Distance between hitch pin holes (center to center): 4-3/8" Distance from receiver end to nearest pin hole: 2-1/2" Distance from accessory end to nearest pin hole: 2" Limited lifetime warranty Notes: Using this adapter will reduce your hitch's weight capacity by 50 percent. Do not use this hitch adapter in towing applications.
Adapter sleeve lets you use your 1-1/4" hitch-mounted accessories with your 2" x 2" trailer hitch receiver. Sturdy steel is powder coated for corrosion resistance. ... Features: Reduces your 2" trailer hitch receiver to a 1-1/4" receiver so that you can mount a bike rack, cargo carrier or other 1-1/4" hitch accessory Durable steel with matte black powder finish and e-coat that resists corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitch receiver Hitch receiver size: 1-1/4" x 1-1/4" Tongue weight: 350 lbs Overall length: 11" Distance between hitch pin holes (center to center): 7" Distance from receiver end to center of nearest pin hole: 2-3/8" Distance from accessory end to center of nearest pin hole: 1-5/8" Limited lifetime warranty Notes: Using this adapter will reduce your hitch's weight capacity by 50 percent. Do not use this hitch adapter in towing applications.
You switch between trailers and want less hassle. One connector at the vehicle keeps hookups quick so you can plug in and go without hunting for parts.
This adapter lets you span 3' to connect your 7-way, RV-style, vehicle-end connector to the 4-way flat connector on your trailer. Coiled cord ensures that wires won't drag on the ground. ... Features: Adapter converts your 7-pole, blade-style, vehicle-end connector for use with a 4-pole flat connector on your trailer Perfect for running power from your vehicle - with the 7-way RV plug - to a trailer with a 4-way flat plug Coiled cord stretches up to 3' long Prevents wires from dragging on ground Sturdy, weatherproof construction Molded construction resists corrosion Brass connectors give you a reliable connection Specs: Cord length: Contracted: 18" Extended: 36" Wire gauge: 18 AWG
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 1" thick shackle mounts on your bumper where the D-rings are attached.These adapters fit shackle mounts that are 1" thick. They attach to the mounts using the holes where the D-rings are mounted. The adapter pins include sleeves that allow them to fit in both 7/8" and 1" diameter holes.
Ever been trapped by your own gear? You roll up to camp ready to relax with a cold beverage, but your bike rack stands between you and a cooler full of well-earned drinks. The Swagman Swivel allows you to open up the rear without unloading your gear.You could try the old "chuck it over the seats and hope for the best" method, but let's be real, someone's getting a flying duffel to the face. Enter the Swagman Swivel hitch adapter. Instead of unloading half your setup just to crack open the back, this clever contraption lets you swing your gear out of the way, left or right, whichever works for you.
Bring your bikes along when flat towing your vehicle. This handy adapter lines up your tow bar with your motorhomes hitch and gives you an extra receiver up top for a bike rack or cargo carrier. No need to leave the fun stuff behind.Protective Powder-Coat Finish Black powder-coat shrugs off chips, salt spray, and UV rays to keep the adapter looking sharp for thousands of miles. Specs Application / Fits: Fits 2" x 2" receiver hitches on motorhomes or tow vehicles Weight Capacity: 10,000 lb gross trailer weight 400 lb maximum tongue weight Dimensions: Rise / drop: 8" Pin hole to top receiver pin hole: 10-3/8" Pin hole to bottom receiver pin hole: 11-1/2" Quantity: 1 dual-receiver adapter
Trailer adapter converts a tow vehicle's 7-pole wiring connection to a 5-pole flat pin connection for towing trailers with hydraulic brakes. ... Features: Trailer adapter converts a tow vehicle's 7-pole wiring connection to a 5-pole flat pin connection for towing a trailer Allows 1 vehicle to tow a camper or boat trailer with hydraulic brakes Handle grip on 7-way plug for easy connection and disconnection Coiled cord stretches and contracts preventing unneeded stress on wires Threaded mounting bracket ensures secure connection to vehicle Specs: Stretched length of cable from plug to plug: 66" 5-way flat plug to coil: 17" 7-way round plug to coil: 7" Length of coiled cable section unstretched: 8" Coiled cable diameter: 1-3/4"
Plug this adapter into your existing 7-way when towing a trailer equipped with LED lights so that your vehicle's computer will recognize the trailer's signals. ...
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 3/4" thick shackle mounts on your bumper where the D-rings are attached.These adapters fit shackle mounts that are 3/4" thick. They attach to the mounts using the holes where the D-rings are mounted. The adapter pins include sleeves that allow them to fit in both 7/8" and 1" diameter holes.
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 1" thick shackle mounts on your bumper. Designed with extra clearance for extended D-ring mounts.These adapters fit shackle mounts that are 1" thick and have an extended reach. They attach to the mounts using the holes where the D-rings are mounted.
Curt 7-way connector to 4-way or 5-way flat connector is designed for use on vehicles with Trailer Lamp-Out sensors when towing a trailer equipped with LED lights.Features: 7-Way RV style adapter to 4-pole and 5-pole flat trailer connectors Designed for use on vehicles with Trailer Lamp-Out sensors - such as Audi, Mercedes-Benz, Porsche, and Volkswagen vehicles with the factory tow package Plugs into a 7-way connector on the vehicle and 4-way or 5-way flat connector on the trailer 1-Year limited warranty
This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.Features: Adapts 4-way flat to both 7-way RV and 4-way flat 4-Way flat output connects tail lights, brake lights, and turn signals 7-Way connects tail, brake, reverse, turn signals, and auxiliary power Dust covers are dirt and weather-resistant Split loom keeps wires contained and protected from the elements Simple installation Wiring harness plugs into existing 4-way flat connector and hardwires to existing wiring to get additional functions needed for 7-way Included hardware and metal mounting bracket secures wiring to the vehicle or trailer hitch 1-Year warranty Specs: Distance between bracket mounting holes center to center: 2-1/4" Harness length: 10" Yellow wire is for reverse lights Blue wire is for brakes Black wire is for 12 volt power White wire is ground
This adapter plugs into your vehicle's 7-way, round-pin receptacle to adapt it for use with a trailer-end, 7-way, RV-style plug. The 7-way flat receptacle includes a hinged cover to keep dirt and moisture out of the connection.Features: Adapter converts your 7-way, round-pin vehicle-end connector for use with a 7-way, RV-style trailer-end connector Lets you tow a trailer with a 7-way blade plug Works with any RV-style, 7-way plug Connects ground, left turn, right turn and stop circuits Round, floating, solid brass pins in plug Ensure minimum voltage drop Align easily for maximum contact Spring-loaded, hinged door on socket to protect the interior from dirt and moisture Collar with 4 mounting holes lets you mount the socket to your bumper Plug is constructed of glass-filled nylon Socket is constructed of high-impact, ABS thermoplastic Specs: Overall length: 14-1/2" Length between plug and socket: 7-1/2" Wire configuration: White: ground return Black: clearance, side marker and identification lights Yellow: left turn signal and hazard signal Red: stop lights and anti-lock devices Green: right turn signal and hazard lights Brown: tail light, rear clearance marker and license plate light Blue: auxiliary circuit/ABS power Wire gauge: White: 8 Red, blue: 10 Black, yellow, green, brown: 12 1-Year limited warranty Note: If your 7-round plug is wired separately (brake light and turn signals on different wires), this adapter won't work.
Filters
