Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
view full answer...Assuming that when you tested the resistance of the brakes you were testing the two wires on each magnet and getting 2.0 and 2.8 ohms the magnets on your trailer are not working correctly and will need to be replaced. For 7" brakes you should…
view full answer...After checking with B&W and the gooseneck hitch #BWGNRK1320 is confirmed to fit your 2022 Ram 2500 with RamBox. You will want to be careful of clearance issues with the trailer and bed rails though since the bed isn't as wide. That is more of…
view full answer...The spindle dimensions you have do not match any of the standard trailer spindles that are available so we do not have any hubs that would fit them. Honestly your best option is going to be to replace the axles. Installing new spindles is a…
view full answer...The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…
view full answer...Based on my research Dexter seal 63052 appears to have been used in a military trailer application. I also could not find a current production seal that cross-references with this one. In this case the way to find a new seal is to measure the hub…
view full answer...The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…
view full answer...The wear plate in the Roadmaster #RM-2000-25 is 16" long x 8" tall and the holes are spaced 14-1/2" apart. The spacer plate is 4" long x 3" tall and 1/4" thick.
view full answer...I attached a picture of the dimensions or the Lippert Door Window Frame part #LC363370 that you referenced. The size you have is the standard that this is designed to fit.
view full answer...We can help you with installing a trailer brake controller like the Curt Venturer time-delay controller #C74VV in your 1995 Ford F-150 to operate the brakes on your Hornet trailer. The parts you need depend on how the truck is equipped. If the truck…
view full answer...The reason you are having issues installing the Tekonsha Prodigy part #90885 is because the correct install harness you need for your truck is the part #3035-P and not the 3036. If you replace the install harness the brake controller will function…
view full answer...I recommend using a Hayes Air Actuated Trailer Brake Controller #HA100400C as it is designed to work on a vehicle like your 2022 Holiday Rambler Ambassador with air brakes. This will tie into your air brakes ensuring the trailer brakes are only…
view full answer...Filters
1139 results
Vehicle Fit
Fit 1996 Toyota Tacoma