... Spring-loaded mechanism makes for easy, single-handed release.Features: Spring-loadedpullpins let you upgrade from cage pins to make adjusting the drop legs on your landing gear a snap Single-handed operation - pullpin to release, let go to engage Simple installation - clamps around jack leg No more lost pins - pullpins stay connected to jack when not in use Designed for use with Stromberg Carlson manual landing gear (LG-183708) or electric landing gear (LG-1, LG-2, LG-3, and LG-4) Also works with other brands of landing gear that have 2-1/4" square leg and a 7/16" diameter pin hole Pullpins will extend 5-1/2" from the leg when installed Durable steel construction Specs: Quantity: 2 drop-leg pullpinsPin diameter: 3/8"
Dutton-Lainson sidewind swivel jack with a 6" dual wheel can be a real back saver when hitching and unhitching loaded trailers.Features: Easy to install: Bolt on mounting Can be mounted in a variety of ways on various sizes of trailer tongues Smooth operating Heavy-duty tongue jacks reduce physical effort required to maneuver loaded trailers into hitching position or removing the trailer from a vehicle Made from heavy-gauge steel for strength and durability The enclosed outer tube retards sand and dirt from contacting the miter gears and heavy-duty Acme screw Has maximum manueverability because of the offset swivel caster assembly Ergonomic hand grip with textured surface Made in the USA Specs: Capacity: 1,500 lbs Lift: 12" Fits square tongues up to 3" x 5" All mounting hardware included 2-1/2" Diameter mounting hole in swivel bracket Fits most other brands of mounting hardware Zinc plated TUFFPLATE finish for longer life 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This Dutton-Lainson sidewind swivel jack is a back saver when hitching and unhitching loaded trailers. The heavy-duty D-L tongue jack reduces the effort required to maneuver a trailer into hitching position or to remove the trailer from a vehicle.
These quick release pullpins are designed to allow for easy and fast adjustment to your landing gear legs. They are easier to remove than standard landing gear pins with their spring-loading action, even after being exposed to the elements.
Upgrade to a 14-pin connector for your vehicle with this socket. Built-in magnet creates tight connection with an EZ Connector trailer-end plug (sold separately). ... This means that the seal created on this connector, either with the lid or with the EZ Connector trailer-end plug, will stay watertight, even if the connector is completely submerged in water for extended periods of time. No Pins or Blades to Bend or Break This EZ Connector socket has spring-loaded, face-to-face electrical contacts instead of pins or blades.
This Dutton-Lainson sidewind swivel jack is a back saver when it comes to hitching and unhitching trailers. Silver finish.Features: Easy to install- bolt on mounting Tongue jack can be mounted in a variety of ways on various sized trailer tongues Smooth operating Enclosed outer tube retards sand and dirt from contacting the miter gears and heavy-duty Acme screw Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating All mounting hardware is included 2-1/2" Diameter mounting hole in swivel bracket fits most other brands of mounting hardware Floating miter gears allow for proper clearance and easier operation Maximum maneuverability from the offset swivel caster assembly Ergonomic hand grip with textured surface Made from heavy-gauge steel for strength and durability Silver finish Made in the USA Specs: Application: square trailer tongues up to 3" x 5" Bracket height: 24" Retracted 33" Extended Lift: 10" Clearance: 10-1/2" from mounting bracket to top of jack Inner tube diameter: 1-3/4" Outer tube diameter: 2" Pullpin diameter: 1/2" Wheel diameter: 6" Lift capacity: 1,000 lbs 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Replaces the inner tube, drop leg, foot, and pullpin for Curt heavy-duty, direct-weld square jack (28512).Features: Replaces the inner tube, drop leg, foot, and pullpin for Curt heavy-duty, direct-weld square jack with 10,000-lb lift capacity (28512) Specs: Inner tube dimensions: 3-1/2" x 3-1/2" Footplate dimensions: 8-1/4" x 8" Drop leg length: 14-1/2"
Weld the U-bracket portion of this pipe mount to your swivel jack so that the jack can be attached to the female pipe on your trailer. Pin hole is 5/8".Features: Tube provides attachment point for your pipe-mount swivel jack Male pipe pairs with pipe on jack so you can swing jack down for use and up for travel Raw finish is ideal for welding U-bracket portion welds onto your jack Specs: Diameter: Outer: 2-1/2" Inner: 2" Pin hole diameter: 5/8" Length: Longer edge to center of pin hole: 1" Shorter edge to center of pin hole: 1" Depth of end without welded bracket: 2-1/4" Depth of end with welded bracket: 3-1/2" Bracket dimensions: Outer width: 2-3/4" Inner width: 2-1/4" Height: 2-5/8" Depth from bracket to outer weld: 2"
Drop leg and pullpin fits most manual A-frame trailer jacks with round outer tubes. Zinc plating resists corrosion.Features: Drop leg and pullpin fits most manual A-frame trailer jacks with round outer tubes Clear zinc-plated finish resists corrosion Specs: Overall height: 13-1/4" Diameter of footplate: 5-1/4" Distance between pin holes center to center: 2" Distance between center of top pin hole and top of leg: 3-3/4" Distance between footplate and center of top pin hole: 9-1/2" Diameter of pin hole: 1/2" Pin dimensions: Overall length: 3" Usable length: 2-3/4" Diameter: 3/8" Outer diameter of tube: 1-3/4" Weight capacity: 2,000 lbs
Weld this female pipe mount to your trailer's frame to provide the mounting point for the male pipe on your swivel jack. Fits 3-1/4" male pipes with a 7/8" pin hole.Features: Provides trailer-side attachment point for your pipe-mount swivel jack Welds onto your trailer frame to provide the attachment point for your pipe-mount swivel jack Allows you to swing your jack down for use and up for travel Female pipe pairs with male mount on your jack Specs: Fits: 3-1/4" male pipe mount Diameter: Outer: 4" Inner: 3-1/4" Pin hole diameter: 7/8" Length: Longer edge to center of pin hole: 1-5/8" Shorter edge to center of pin hole: 1-1/4" Overall: 2-7/8"
Weld this male pipe mount to your swivel jack so you can install the jack on the female pipe on your trailer's frame. Fits 2-1/2" diameter female pipes with a 9/16" pin hole diameter.Features: Provides an attachment point for your pipe-mount swivel jack Welds onto your trailer jack to provide the attachment point for securing the jack to your trailer Allows you to swing your jack down for use and up for travel Male pipe pairs with female mount on your trailer's frame Specs: Fits: 2-1/2" female pipe mount Diameter: Outer: 2" Inner: 1-1/2" Pin hole diameter: 9/16" Length: Longer edge to center of pin hole: 1-1/8" Shorter edge to center of pin hole: 3/4" Overall: 1-7/8"
Replaces the pullpin for your Bulldog 8,000-lb sidewind, pipe-mount swivel jack (BD190756 or BD190758) or Crown jack with 7,000-lb capacity. Chain secures to side of the jack so you don't lose the pin.Features: Replaces the pullpin for your Bulldog 8,000-lb sidewind, pipe-mount swivel jack (BD190756 or BD190758) or Crown jack with 7,000-lb capacity Chain secures to side of the jack so you don't lose the pin Specs: Pin diameter: 5/8" Pin length: 4-1/4" Features: Bulldog 8,000-lb sidewind, pipe-mount swivel jacks: BD190756 and BD190758 Crown jacks with 7,000-lb capacity
Weld this male pipe mount to your swivel jack so you can install the jack on the female pipe on your trailer's frame. Fits 2-1/2" square female pipe mount. Pin hole diameter is 5/8".Features: Provides an attachment point for your pipe-mount swivel jack Welds onto your trailer jack to provide the attachment point for securing the jack to your trailer Allows you to swing your jack down for use and up for travel Male pipe pairs with female mount on your trailer's frame Specs: Fits: 2-1/2" square female pipe mount Width: Outer: 2" Inner: 1-1/2" Pin hole diameter: 5/8" Length: Longer edge to center of pin hole: 1-1/2" Shorter edge to center of pin hole: 3/4" Overall: 2-1/4"
Establish a secure connection between your trailer and your towing vehicle with this 6-pole, round pin, wire-insertion-style socket. Spring-loaded lid keeps dirt and moisture out of the connector when it is not in use.Features: Establishes a secure connection between your trailer and towing vehicle 6-pole round pin socket is constructed of tough polymer Spring-loaded lid keeps dust and moisture out of the connector when it is not in use Mounts to your tow vehicle 2-Hole mounting style Durable black plastic construction
Establish a secure connection between your trailer and your towing vehicle with this 6-pole, round pin, wire-insertion-style socket. Spring-loaded lid keeps dirt and moisture out of the connector when it is not in use.Features: Establishes a secure connection between your trailer and towing vehicle 6-pole round pin socket is constructed of tough polymer Spring-loaded lid keeps dust and moisture out of the connector when it is not in use Mounts to your tow vehicle 2-Hole mounting style
Establish a secure connection between your tow vehicle and trailer with this 9-pole, RV-style socket. Socket has spring-loaded contacts and floating pins to provide easy alignment, ensure minimum voltage drop and promote the most positive contact.Features: Heavy-duty, 9-pole plug connects tow vehicle to semi trailer Round, floating pins Ensure minimum voltage drop Terminals designed for (2) 8-gauge, (2) 12-gauge and (5) 14-gauge wires Promote easy alignment Provide the most positive contact Spring-loaded contacts Completely field serviceable for easy repairs Black plastic housing Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground Return - 8 gauge Blue - Electric Brakes - 12 gauge Green - Tail, License and Running Lights - 14 gauge Black - Battery Charge - 8 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Backup, Auxiliary Ground or Circuit - 14 gauge Gray - Auxiliary Circuit - 12 gauge Orange - Reefer (tag) or Stop - 14 gauge 1-Year limited warranty
Provide power straight from your battery to a variety of auxiliary equipment with this single-pole socket. Socket has a round pin that is removable for easy soldering and a spring-loaded cover to protect interior from the elements.Features: Rugged, single-pole socket Ideal for heavy-duty power applications Supplies auxiliary power from vehicle battery Round, removable pin for easy soldering Concealed terminals for durability Provide easy assembly Spring-loaded lid Has corrosion-resistant plating Keeps dust and moisture out of interior 2-Hole mounting style Specs: Current rating: 300 amps continuous-duty capacity 1-Year limited warranty 11-851 Pollak Single-Way, Round Pin Trailer Wiring Socket - Vehicle End
This dual-pin, two-speed jack from RAM delivers 20,000 lb of static support and 12,000 lb of lift. Its spring-return drop leg, 4-3/8" tubing, and 9" x 9" footplate provide stable, heavy-duty performance.Features: Two-speed gearbox makes raising or lowering heavy loads faster and easier Dual-pin, spring-return drop leg lets you quickly set height without cranking Heavy-duty square tubing provides stability under maximum load Large footplate keeps the jack steady and drains water away Grease fittings and brass bushings reduce wear and simplify maintenance Black powder coat finish protects against rust and corrosion Handle assembly included for smooth sidewind operation Specs: Jack type: Two-speed, sidewind Static capacity: 20,000 lb Lift capacity: 12,000 lb Drop leg: Spring-return, dual-pin Outer tube: 4-3/8" square Travel: 26-1/2" total Screw travel: 13-1/2" Drop leg travel: 13" Footplate: 9" x 9" with drainage Finish: Black powder coat Mount: Weld-on
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.This means that the seal created on this connector, either with the dummy plug or with the EZ Connector trailer-end plug, will stay watertight, even if the connector is completely submerged in water for extended periods of time. No Pins or Blades to Bend or Break This EZ Connector socket has spring-loaded, face-to-face electrical contacts instead of pins or blades.
Filters
