Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Included deep-drop shank is designed for lifted trucks.If you still have a hard time even after balancing your tongue weight, a weight distribution hitch should help. L-Brackets vs. Add-On Friction Sway Bars L-brackets that hold spring bars in place provide a tried-and-true method of sway control Provides weight distribution and sway control in one system Ensures steady towing, but can be noisy Friction sway bars can be added to a standard weight distribution hitch to force your trailer back in line Has to be removed at times (e.g. in the rain or when you're backing up), but its adjustable tension is a plus Doesn't work with surge-type actuators If you need a durable, affordable option that will give you weight distribution and sway control in one, the Reese Pro Round Bar might be just what you're after.
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. ... Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout.
... Get some control back with this low-cost solution. The telescoping sway bar lets you set just the right amount of resistance. Head unit comes with a pre-torqued hitch ball.Included w/ System Required - Sold Separately Optional Add-Ons Adjustable Shank System Head 2-5/16" Torqued Chrome Hitch Ball Lift Brackets Spring Bars Lift Bar Hitch Pin and Clip Bar-Style Friction Sway Control Unit n/a n/a Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Built-in, active sway control keeps your trailer in line using a system of spring-loaded ball bearings and steel-on-steel friction. System head is adjustable so you can easily achieve the proper tilt. Hitch ball sold separately.To fine-tune the system, simply start out in Position 1, which is the lowest head tilt setting. This setting applies the least amount of tension to the spring bars. As you continue to adjust the head tilt, more tension will be applied to the spring bars. Work through the positions in order until the correct tilt setting is determined.
An over 80" ID bar and white load light built into one housing. Keep wide trailers properly marked on the road or switch on bright white light for backing into tight spots, loading equipment, or setting up at camp after dark.Over 80" ID Bar And Load Lamp: Red/white combo keeps wide trailers marked and lights up the work area. Add 500 Lumens Of Work Light: White LEDs provide usable light for backing, loading, and campsite tasks.
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank and pre-attached, pre-torqued 2-5/16" ball included.Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout.
Built-in sway control keeps your trailer in line by using specific tension points and steel-on-steel resistance. System head tilt adjustment feature eliminates the need for washers. 2-5/16" Ball and adjustable 2" shank included.Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout.
The Continuum is so quiet, you just might forget you have it. No more snapping bars up onto noisy brackets. Easy to install, distributes weight with precision, controls sway, and is adjustable on-the-fly. 2-5/16" Ball and 2" shank included.Features: Evenly distributes weight over axles of tow vehicle and trailer for stability and control Creates a more level ride for both tow vehicle and trailer Super-quiet sway control works without noisy brackets or add-on sway bars No screeching steel or popping brackets Silent friction sway control inside hitch head helps hold trailer steady at connection point Perfect weight balance is easy to achieve with the pump of a pressurized handle Keep track of the psi setting to recreate your perfect tow setup every time you hit the road Make adjustments on-the-fly, even on the side of the road Get more leverage when pumping at higher pressure levels by extending the handle Huge tongue weight range can handle almost anything Grows with you as you upgrade to larger trailers and campers Uses flexible loadbars that support light and heavy loads alike Fast and easy setup every time Preset pitch in the system head means it's always ready to go - no need to adjust No more circling your trailer to snap spring bars into place - single-piece loadbar assembly can be set up entirely from driver's side Built-in grease zerks in the head make routine maintenance easy Durable and corrosion-resistant, powder coated, cast iron components System includes head assembly, adjustable shank, hitch ball, hydraulic pump and cylinder, loadbar assembly, and all necessary hardware Made in the USA Specs: Tongue weight: 600 lbs - 1,600 lbs Maximum gross towing weight: 16,000 lbs Application: 2" x 2" Trailer hitch receivers rated for use with weight distribution systems Fits trailer frame height of 5" or 6" Compatible with tow vehicles with or without an auto-leveling system Ball size: 2-5/16" Maximum drop: 1-1/8" Maximum rise: 9-3/8" Shank length: 6-3/8" From center of hitch pin hole to center of adjustment holes 6" From center of hitch pin hole to front of shank Total height adjustment along shank: 10-1/2" Overall height: 8-3/4" Head adjusts in 3-1/2" increments Space between loadbars: 6-1/2" Weight of loadbar assembly: 20 lbs Weight of system head: 35 lbs Limited lifetime warranty Notes: The B&W Continuum cannot be used with surge-type trailer brakes.
Get the most out of your TorkLift SuperHitch Magnum dual-receiver trailer hitch with this heavy-duty weight distribution system. Adjustable collar-style chain brackets and hydraulic assist make setup a snap. Hitch ball and shank sold separately.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Works exclusively with your SuperHitch Magnum dual-receiver trailer hitch (sold separately) Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Hydraulic-assist jack makes connecting spring bars a snap Removes the danger of manually snapping up highly tensioned bars Desired head tilt is achieved with easy-to-adjust, square spacers Pre-drilled holes in hitch head let you install a friction sway control (sold separately) on either side Sturdy, round spring bars attach like trunnion bars Provides more ground clearance than the standard round bars Convenient, adjustable brackets let you easily clear obstacles on your frame Clamp or bolt chain brackets to your trailer frame with the included hardware Slide the adjustable collar along the spring bar and tighten the built-in hex bolt to secure it in place Accommodates frame-mounted obstacles like battery boxes, tool boxes, or generators Grease zerks make maintenance easy Powder coated steel resists corrosion System includes head assembly, spring bars, brackets and chains, hydraulic jack with handle, and necessary hardware Adjustable shank (LM9010 or TLM9011) and hitch ball with 1-1/4" shank sold separately Made in the USA Specs: Application: TorkLift SuperHitch Magnum dual-receiver trailer hitches Tongue weight: 1,500 lbs - 3,000 lbs Maximum gross towing weight: 30,000 lbs Hitch ball hole diameter: 1-1/4" Lifetime warranty Included w/ TLWD1000 Required - Sold Separately Optional Add-Ons System Head Chain Brackets Spring Bars Adjustable Shank (TLM9010 or TLM9011) Hitch Ball w/ 1-1/4" Diameter Shank Bar-Style Friction Sway Control Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Hitch ball sold separately.Because the steel-on-steel friction of the bars and L-brackets is noisy, don't be alarmed if you hear some banging, creaking, and grinding. It's just the system working to correct sway.
Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Customize with your own hitch ball and shank to suit your towing needs.Because the steel-on-steel friction of the bars and L-brackets is noisy, don't be alarmed if you hear some banging, creaking, and grinding. It's just the system working to correct sway.
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. ... Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout.
This weight-distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank and pre-attached, pre-torqued 2-5/16" ball included.Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout.
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. ... Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout.
The Continuum is so quiet, you just might forget you have it. No more snapping bars up onto noisy brackets. Easy to install, distributes weight with precision, controls sway, and is easily adjustable. 2-5/16" Ball and 2" shank included.Features: Evenly distributes weight over axles of tow vehicle and trailer for stability and control Creates a more level ride for both tow vehicle and trailer Super-quiet sway control works without noisy brackets or add-on sway bars No screeching steel or popping brackets Silent friction sway control inside hitch head helps hold trailer steady at connection point Perfect weight balance is easy to achieve with the pump of a pressurized handle Keep track of the psi setting to recreate your perfect tow setup every time you hit the road Make adjustments on-the-fly, even on the side of the road Get more leverage when pumping at higher pressure levels by extending the handle Huge tongue weight range can handle almost anything Grows with you as you upgrade to larger trailers and campers Uses flexible loadbars that support light and heavy loads alike Fast and easy setup every time Preset pitch in the system head means it's always ready to go - no need to adjust No more circling your trailer to snap spring bars into place - single-piece loadbar assembly can be set up entirely from driver's side Built-in grease zerks in the head make routine maintenance easy Durable and corrosion-resistant, powder coated, cast iron components System includes head assembly, adjustable shank, hitch ball, hydraulic pump and cylinder, loadbar assembly, and all necessary hardware Made in the USA Specs: Tongue weight: 600 lbs - 1,600 lbs Maximum gross towing weight: 16,000 lbs Application: 2" x 2" Trailer hitch receivers rated for use with weight distribution systems Designed for use on trailers with bottom-mounted couplers Fits trailer frame height of 5" or 6" Compatible with tow vehicles with or without an auto-leveling system Ball size: 2-5/16" Maximum drop: 1-1/8" Maximum rise: 9-3/8" Shank length: 6-3/8" From center of hitch pin hole to center of adjustment holes 6" From center of hitch pin hole to front of shank Total height adjustment along shank: 10-1/2" Overall height: 8-3/4" Head adjusts in 3-1/2" increments Space between loadbars: 6-1/2" Weight of loadbar assembly: 20 lbs Weight of system head: 35 lbs Limited lifetime warranty Notes: The B&W Continuum cannot be used with surge-type trailer brakes.
The Equal-i-zer has a reputation as strong as its American-made steel. We love this hitch's solid build quality and that it helps to proactively stop trailer sway instead of just dampening it after it starts. Ball and shank included.All of this tension throughout the system helps to create a rigid steel-on-steel setup that keeps your trailer in line and your ride level. If a particularly strong wind gust crosses your path and your trailer starts to get off track despite the Equal-i-zer's firm hold, the steel-on-steel friction of the bars on their brackets will stop the bars from moving, and ultimately dampen any remaining trailer sway.
Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Included deep-drop shank is designed for lifted trucks.If you still have a hard time even after balancing your tongue weight, a weight distribution hitch should help. L-Brackets vs. Add-On Friction Sway Bars L-brackets that hold spring bars in place provide a tried-and-true method of sway control Provides weight distribution and sway control in one system Ensures steady towing, but can be noisy Friction sway bars can be added to a standard weight distribution hitch to force your trailer back in line Has to be removed at times (e.g. in the rain or when you're backing up), but its adjustable tension is a plus Doesn't work with surge-type actuators If you need a durable, affordable option that will hold your trailer in line while providing sway control, the Reese Pro Round Bar might be just what you're after.
Restore stability and control in your ride so you can tow to the max capacity of your hitch. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Built to be easily upgraded for sway control Add on an optional bar-style friction sway control kit (17200 - sold separately) Desired head tilt is achieved with traditional washer design Add or remove washers from spacer rivet to tilt head up or down Round spring bars are constructed of solid, forged steel for strength and durability Powder coated steel resists corrosion Grease zerks in the head assembly make for simple maintenance Includes head assembly, adjustable shank, spring bars, lift brackets, lift chains, handle, and all necessary hardware Hitch ball with 1-1/4" diameter shank sold separately Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 600 lbs - 800 lbs Maximum gross towing weight: 8,000 lbs Lift bracket positioning: 31-3/16" back from hitch ball Shank length: 12" Maximum rise: 6" Maximum drop: 2-1/2" 1-Year limited warranty Included w/ System Required - Sold Separately Optional Add-Ons Adjustable Shank System Head Lift Brackets Spring Bars Lift Bar Hitch Pin and Clip Hitch Ball w/ 1-1/4" Diameter Shank Bar-Style Friction Sway Control Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
High-performance system is designed to offer the best in weight distribution with an easy-to-adjust, forged head; a raised ball platform; and flexible, powder coated steel, trunnion spring bars. Adjustable shank and hitch ball sold separately.Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout.
... Get some control back with this low-cost solution. The telescoping sway bar lets you set just the right amount of resistance. Head unit comes with a pre-torqued hitch ball.Included w/ System Required - Sold Separately Optional Add-Ons Adjustable Shank System Head 2-5/16" Torqued Chrome Hitch Ball Lift Brackets Spring Bars Lift Bar Hitch Pin and Clip Bar-Style Friction Sway Control Unit n/a n/a Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Rigid brackets on this weight distribution hitch provide steel-on-steel friction to help keep your trailer in line. This corrects sway for a smooth ride. Adjustable shank and 2-5/16" hitch ball included. Works with underslung couplers.Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout.
Perfect for your short-tongue trailer, this heavy-duty weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank included. Hitch ball sold separately.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Accomodates your short-tongue trailer with bars that are shorter than those in standard systems Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Built to be easily upgraded for sway control Add on an optional bar-style friction sway control kit (17200 - sold separately) Desired head tilt is easily achieved using 2 set screws to pivot the system - no more piling on washers Tilt the hitch ball away from your tow vehicle to add more tension Trunnion spring bars are constructed of solid, forged steel for strength and durability Powder coated steel resists corrosion Includes head assembly, adjustable shank, spring bars, lift brackets, lift chains, handle, and all necessary hardware Hitch ball with a 1-1/4" diameter shank sold separately Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight-distribution systems Tongue weight: 1,000 lbs - 1,500 lbs Maximum gross towing weight: 15,000 lbs Spring-bar length: 28-3/8" Shank length: 12" Maximum drop: 1/2" Maximum rise: 7-1/2" 1-Year warranty Included w/ C17333 Required - Sold Separately Optional Add-Ons Adjustable Shank System Head Lift Brackets Spring Bars Hitch Ball w/ 1-1/4" Diameter Shank Bar-Style Friction Sway Control Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Perfect for your short-tongue trailer, this heavy-duty weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank included. Hitch ball sold separately.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Accomodates your short-tongue trailer with bars that are shorter than those in standard systems Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Built to be easily upgraded for sway control Add on an optional bar-style friction sway control kit (17200 - sold separately) Desired head tilt is easily achieved using 2 set screws to pivot the system - no more piling on washers Tilt the hitch ball away from your tow vehicle to add more tension Trunnion spring bars are constructed of solid, forged steel for strength and durability Powder coated steel resists corrosion Includes head assembly, adjustable shank, spring bars, lift brackets, lift chains, handle, and all necessary hardware Hitch ball with a 1-1/4" diameter shank sold separately Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight-distribution systems Tongue weight: 800 lbs - 1,000 lbs Maximum gross towing weight: 10,000 lbs Spring-bar length: 28-3/8" Shank length: 12" Maximum rise: 7-3/4" from top of hitch receiver opening Maximum drop: 1/2" from top of hitch receiver opening 1-Year warranty Included w/ C17332 Required - Sold Separately Optional Add-Ons Adjustable Shank System Head Lift Brackets Spring Bars Hitch Ball w/ 1-1/4" Diameter Shank Bar-Style Friction Sway Control Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Replaces the loadbars for B&W Continuum weight distribution system. For use with standard coupler.Features: Replaces the loadbars for B&W weight distribution systems that use standard coupler Tongue weight: 600 lbs - 1,600 lbs Includes 2 bars
Filters
