This adapter module allows you to control your Dexter Axle BrakeRite (T4813100, T4813102, T482250, or T4835700) electric-over-hydraulic brake actuator with your factory Ford, GMC, or Chevy brake controller.
Use your Gen 6 or later Hydrastar electric-over-hydraulic brake actuator with your factory Ford (model years 2007 - 2008) or Chevy (model years 2007 - current) electric trailer brake controller by installing this adapter.Some factory brake controllers are only compatible if used with this adapter module. See the following table to determine compatibility with common models of brake controllers.
Install your electricbrake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter. This adapter requires no hardwiring. It is designed to plug directly into your electricbrake controller for the simplest installation possible.
Install your electricbrake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter. This adapter requires no hardwiring. It is designed to plug directly into your electricbrake controller for the simplest installation possible.
Install your electricbrake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the junction box beneath your vehicle's dashboard.Features: Adapter is wired for GM trucks and SUVs from 2003 to 2006 and 2007 classic body style trucks Wiring adapter eases installation of your electricbrake controller Custom connector end plugs into the electric junction box beneath the dash of your vehicle Other end plugs into the back of your electricbrake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520), Draw-Tite I-Command (5535), and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the port that is built into the electric junction box beneath your vehicle's dash.
Install your electricbrake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter. This adapter requires no hardwiring. It is designed to plug directly into your electricbrake controller for the simplest installation possible.
Install your electricbrake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into the built-in harness in your cargo area and then route it up to your dash so you can plug in your brake controller.If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter. This adapter requires no hardwiring. It is designed to plug directly into your electricbrake controller for the simplest installation possible.
Install your electricbrake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter. This adapter requires no hardwiring. It is designed to plug directly into your electricbrake controller for the simplest installation possible.
Install your electricbrake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electricbrake controller Connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electricbrake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tow Ready Brake Controller Adapter To install your electricbrake controller you need to connect the wiring of the controller to your vehicle.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.
Ease installation of your electricbrake controller by using this custom wiring adapter. Simply connect the 4 wires of the harness to your brake controller and then plug the other end into the junction box beneath your vehicle's dashboard.Features: Pigtail wiring adapter eases installation of your electricbrake controller Connector end plugs into the electric junction box beneath the dash of your vehicle Wire end connects to the wires on your brake controller with the included butt connectors 90-Day limited warranty Installation of Hopkins Wiring Adapter for ElectricBrake Controllers This adapter plugs into the port that is built into the electric junction box underneath your vehicle's dash.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.Features: Proportional - Smooth, safe, and good for your brakes long-term Sleek (tiny!) knob that blends into your dash - The main unit mounts out of sight behind the dashboard Simple controls - Use the knob to adjust the settings, activate manual override, and troubleshoot Safe - Meets or exceeds both UNECE R21 and FMVSS 201 regulations for sustainability and safety Requires universal wiring harness (RED69FR - sold separately) - Custom-fit adapter (sold separately) available for select vehicles Made in Australia - If it can take the Outback, it can take anything, mate Specs: Application: trailers with up to 2 axles (4 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Main unit dimensions: 4" long x 3-3/8" wide x 1-1/8" tall Control knob dimensions: 1-7/8" long x 9/16" wide x 3/4" tall Length without dial: 1-1/4" Output voltage range: 9V - 16V Output current rating: 18 amps continuous Maximum charging voltage: 12V DC 2-Year warranty Note: Pick up a universal mounting panel to give your installation a professional look!
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.Features: Proportional - Smooth, safe, and good for your brakes long-term Off-road mode - A unique feature that gives you direct control of your trailer's brakes Sleek (tiny!) knob that blends into your dash - The main unit mounts out of sight behind the dashboard Simple controls - Use the knob to adjust the settings, activate manual override, and troubleshoot Safe - Meets or exceeds both UNECE R21 and FMVSS 201 regulations for sustainability and safety Universal wiring harness - Custom-fit adapter (sold separately) available for select vehicles Made in Australia - If it can take the Outback, it can take anything, mate Specs: For trailers with up to 3 axles (6 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Control knob dimensions: 1-7/8" long x 9/16" wide x 3/4" tall Length without dial: 1-1/4" Works with 12-volt and 24-volt vehicle electrical systems Output voltage range: 9V - 32V Output current rating: 25 amps continuous Maximum charging voltage: 12V DC 2-Year warranty Off-Road Mode The off-road mode is a unique feature of the Redarc Tow-Pro Elite.
If your vehicle already has a 4-way flat, this kit includes everything you need to install an electric trailer brake controller and 7-way connector. If there's not an existing 4-way flat on your vehicle, you can purchase one separately.
Anodized aluminum electric-hydraulic actuator with control adapter module (CAM) lets you use your Ford, Chevy, or GM factory brake controller to activate your trailer's hydraulic brakes. ... Hydrastar Electric-Over-Hydraulic Actuator vs. Standard Surge Brake Actuators With the Hydrastar electric-over-hydraulic actuator, you can get all the benefits of towing with an electricbrake controller while using hydraulic brakes.
Convert your vehicle's 4-way to a 7-way with this wiring adapter. Flat, 4-pole connector plugs into your vehicle and additional wire leads pull 12V power for accessories and send signals for the electricbrakes and auxiliary or reverse.Features: Adapter converts the 4-way flat trailer connector on your vehicle to a 7-way RV-style connector 4-Way flat trailer end plugs into the 4-way flat on your vehicle 7-Way RV-style connector plugs into the 7-way on your trailer Additional wire leads for 12V power, electricbrake function, and auxiliary or reverse function Blue wire connects to your brake controller to send braking signal to your trailer's electricbrakes Black wire pulls 12V power from your vehicle's battery to help maintain the trailer battery or power accessories Yellow wire sends the signal to your trailer to activate the reverse light or an auxiliary circuit Spring-loaded dust cover protects the 6-way connector from moisture and debris Specs: Harness length: 12" Wiring configuration: Green (4-way): passenger side brakes/turn signal Yellow (4-way): driver side brakes/turn signal Brown (4-way): tail lights Blue: electricbrakes Black: battery Yellow: 12V power supply or auxiliary White: ground 1-Year warranty
Replace the 7-way, RV-style trailer connector on your vehicle with this T-One harness. ModuLite reduces strain on wiring system. Brake controller adapter plugs into your vehicle's wiring when installing your electric trailer brake controller.This adapter is designed to plug directly into your electricbrake controller after connecting to your vehicle's wiring. You can unplug and remove your brake controller at any time and securely stow it away.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.The included bracket is designed to mount the brake controller flush to the dash so it takes up almost no space at all. The included custom-fit adapter plugs into the port that is built into the electric junction box beneath your vehicle's dash.
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.Features: Proportional braking - Smooth, safe, and good for your brakes long-term Fingertip control Adjust braking output and sensitivity by turning the dial Push the button to activate manual override Troubleshoot with colored LED indicators No-drill installation - Knob adheres to dash, main unit installs behind it Plug-and-play - Custom-fit wiring harness Assembled in the USA Specs: Application: trailers with 1 to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Main unit dimensions: 3" long x 3-1/2" wide x 7/8" tall Control knob dimensions: Extension: 1-1/2" Diameter: 1-3/4" Cable length: 4' Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness How Does the Curt Spectrum Work?
Replace the damaged 7-way, RV-style trailer connector on your vehicle with this T-One harness. ModuLite reduces strain on wiring system. Brake controller adapter plugs in beneath your dash and lets you easily plug in your electricbrake controller.This adapter is designed to plug directly into your electricbrake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent.
Upgrade your trailer's actuator to meet the high demands of your disc brakes. Designed to ensure faster stops. Works great for retrofits because it ties into your trailer's junction box (sold separately).Ford and GM trucks with factory brake controller require adapter (DX35FR - sold separately).
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.No matter how you install it, the unit will sense the direction of travel and its orientation. The included custom-fit adapter plugs into the port that is built into the electric junction box beneath your vehicle's dash. The black box is located to the left of the steering column, just above the carpet.
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.Features: Proportional braking - Smooth, safe, and good for your brakes long-term Fingertip control Adjust braking output and sensitivity by turning the dial Push the button to activate manual override Troubleshoot with colored LED indicators No-drill installation - Knob adheres to dash, main unit installs behind it Assembled in the USA Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Main unit dimensions: 3" long x 3-1/2" wide x 7/8" tall Control knob dimensions: Extension: 1-1/2" Diameter: 1-3/4" Cable length: 4' Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness How Does the Curt Spectrum Work?
Trust in faster braking response and improved control for your 5th wheel, horse, or work trailer. Works with from-the-factory electricbrake controllers, so you won't need an extra adapter.
Filters
