Fleece-backed tape serves as a foundation for patching and sealing seams and joints on your RV. Tape instantly adheres to almost any surface and the textured backing absorbs paint or sealant to create a waterproof coat.Features: Fleece-backed tape is used to create a watertight seal around seams, endcaps, and joints Perfect for providing a foundation for repairs to wood seaming Instant tack adhesive sticks to wood, metal, fiberboard, ISO board and concrete Has a longer life cycle than butyl, acrylic, or asphalt-based adhesives Easy installation - apply tape to a clean surface and press firmly to activate adhesive Steel or rubber roller recommended for smooth application Surface should be completely free of moisture, dirt, oil or other contaminants Lightly coat with paint or liquid adhesive to create waterproof coat White color Made in the USA Specs: Quantity: 1 roll Dimensions: 90' long x 3" wide x1/32" thick Application temperature range: -10 F - 160 F 1-Year limited warranty Note: Fleece facing absorbs moisture, so it must be coated with sealant or paint to keep it from wicking.
Sleep soundly in your RV knowing that your family will be better protected with this accurate propane and CO detector. When either gas is detected, an LED and a loud horn immediately alert you so you can get to safety more quickly.Features: Detector quickly warns you of hazardous levels of propane and carbon monoxide inside your RV or camper Helps keep your family safe and out of harm's way Uses less power than other detectors Highly selective sensors reduce the number of false alarms from non-threatening gases LED light and loud horn provide visible and audible cues that you'll catch day or night 4 Beeps and a flashing red light alert you to carbon monoxide Continuous beep and solid red light alert you to propane gas or a combination Button on the front lets you test the detector to make sure it's working properly Also can silence the alarm up to 5 minutes for non-urgent situations Compact, slim design helps save wall space in your RV Durable polycarbonate construction in black Easy installation onto the wall - 2 wires hook up to your battery Can replace 90% of all detectors with universal mounting brackets Mounts 4" - 18" above the floor Does not include flat 1/2" self-tapping screws ETL and cETL listed, and exceeds UL 2034 and 1484 and CSA 6.19.01 requirements Assembled in the USA Specs: Alarm dimensions: 4-1/4" long x 2-5/8" wide x1/2" thick Mounting bracket dimensions: Larger bracket: 7-1/4" long x 3-3/8" wide Smaller bracket: 5-3/4" long x 4-1/4" wide Mounting hole spacing (center on center): Alarm: 3-5/8" Larger bracket: 6" Smaller bracket: 5-1/4" RV voltage requirement: 8V-15 V DC CO sensitivity: as low as 70 ppm LP sensitivity: as low as 4200 ppm Current draw: 17 mA at 13.5V Alarm intensity: 85 dB Lifespan: 5 years Operational temperature range: -40 degrees F to 150 degrees F (-40 degrees C to 66 degrees C) 1-Year limited warranty Having a propane or carbon monoxide gas leak in your RV is a scary situation that you don't want to even think about let alone experience.
Need to join a 1/2" water line to a threaded fitting in a cramped spot? The Flair-It swivel elbow makes it easy. Thread on the swivel nut, hand-tighten the barb side, and get a leak resistant seal in minutes with no special tools needed.Ideal for water heaters, filters, or any fixture where space is tight and reliability matters. Specs Fitting type: 90 Degree Swivel Elbow Connection size: 1/2" Female Pipe Thread (FPT) x1/2" Barb Swivel nut: Yes, for easy alignment during install Compatible pipe: 1/2" PEX, Polybutylene (PB), Polyvinyl tubing Material: Polyoxymethylene (POM) Maximum temperature: 180 F Maximum pressure: 100 PSI
Replace or install a new fitting on a Valterra ABS plastic fresh-water tank. 90-Degree elbow has a collar to attach to 1-1/2" MPT inlet on the tank and a barbed connection for 3/4" hose.
Use the tools the pros use for exterior RV repair. With a mylar backing for added structural support, this butyl tape was designed for weatherproofing corners and joints along flat, even surfaces. Works well in some marine and HVAC applications.Features: Mylar-backed butyl tape weatherproofs corners and joints while providing structural support Designed to seal sidewalls and endwalls of flat, even, non-porous surfaces A popular choice for sealing corners of RV units with laminated sidewalls Suitable for marine, HVAC or metal building applications Butyl adhesive sticks to most smooth, non-porous surfaces Easy to use - apply tape to a clean, dry surface and press firmly for instant adhesion Steel roller recommended for smooth application on roofing membranes Trim tape to the length you need with scissors White color Made in the USA Specs: Quantity: 1 roll Dimensions: 90' long x 3" wide x1/32" thick Application temperature range: -5 F - 120 F 1-Year limited warranty Butyl tape is used primarily as a gasket for preventing moisture from leaking into your RV around cutouts in the hull for vents, doors, windows, and wiring outlets.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and protective dust shields. Fits 15" or larger wheels.
Use the tools the pros use for exterior RV repair. With a mylar backing for added structural support, this butyl tape was designed for weatherproofing corners and joints along flat, even surfaces. Works well in some marine and HVAC applications.Features: Mylar-backed butyl tape weatherproofs corners and joints while providing structural support Designed to seal sidewalls and endwalls of flat, even, non-porous surfaces A popular choice for sealing corners of RV units with laminated sidewalls Suitable for marine, HVAC or metal building applications Butyl adhesive sticks to most smooth, non-porous surfaces Transparent mylar facer has salvage edge to make tape easier to handle without making contact with adhesive Easy to use - apply tape to a clean, dry surface and press firmly for instant adhesion Steel roller recommended for smooth application on roofing membranes Trim tape to the length you need with scissors Black color Made in the USA Specs: Quantity: 1 roll Dimensions: 90' long x1-1/4" wide x1/32" thick Application temperature range: -5 F - 120 F 1-Year Limited Warranty Butyl tape is used primarily as a gasket for preventing moisture from leaking into your RV around cutouts in the hull for vents, doors, windows, and wiring outlets.
Hub-and-drum assembly fits 9K to 10K axles manufactured after July 2009. Inner bearing (387A) and race, outer bearing (25580) and race, oil cap with plug and seal, wheel retaining ring, lug nuts, and studs included. Drum is for non-ABS brakes.
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 4,400-lb E-Z Lube axles. Inner bearing (L68149) and race, outer bearing (LM67048) and race, grease seal (10-19), grease cap (21-42-1), and lug nuts included.
Need to bend your RV water line around a corner? This PEXLock elbow lets you route 1/2" pipe tight and clean, with leak resistant clamps and no special tools required.All plastic construction stands up to tough road conditions and hard or acidic water. Specs Fitting type: PEXLock 90 Degree Elbow Connection size: 1/2" barb x1/2" barb Compatible pipe: PEX, PERT tubing, IAPMO approved polyvinyl tubing Material: Polyoxymethylene (POM) fitting, engineered plastic PEXLock clamps Included: 1 elbow fitting and 2 PEXLock clamps Certifications: NSF certified for potable water systems Durability: Corrosion, chemical, and electrolysis resistant high impact plastic Maximum temperature: 180 F Maximum pressure: 100 PSI
This 2-in-1 AC/DC distribution panel and converter charger keeps your power systems easily accessible inside the RV. Works with lithium and lead acid batteries. Uses a custom charging profile for lithium and multistage charging for lead acid.Features: 2-in-1 unit combines an AC/DC distribution panel with a multifunction converter charger Consolidated system saves space and means you only have to install 1 component Power distribution panel provides power to AC and DC applications in your RV Requires AC breakers and DC fuses (sold separately) Converter charger uses shore power to quickly charge your RV batteries Provides continuous power to run 12V loads Works with lithium-ion, flooded lead acid, AGM, and gel batteries High voltage output provides full, quick charge for your lithium batteries Charge Wizard monitors lead acid batteries and automatically begins charging when needed Multistage charging helps extend battery life Built-in safety features protect your RV's electrical system Hardwired installation into your existing RV electrical system Heat-resistant polymer construction UL listed Made in the USA Specs: Application: 12V battery systems Rated power output: 725 watts Amperage: AC distribution: Up to 6 branch circuits rated at 30 amps (using tandem breakers) DC distribution fuses: (2) 30 amp and (10) 20 amp Converter output: 45 amps Voltage: AC distribution rating: 120 VAC Converter input: 105 - 130 VAC Converter output (no load): 13.6 VDC Converter output (full load): > 12.6 VDC Temperature ranges: Operating range: 32 F to 122 F Storage range: -4 F to 176 F Overall dimensions: 12-1/4" long x 8-3/4" tall x 7-1/4" deep Rear cutout: 10-3/4" long x 7-1/4" tall Weight: 5.7 lbs 2-Year limited warranty Replacement Cross-Reference: WFCO WF-8945ANP WFCO WF-8740P Parallax 7345 Parallax 8345 Parallax 7145 Powermax PPC-32 Powermax PPC-45 Note: Not all units are a direct replacement.
Elbow combines black-water gray-water waste valves into one outlet. 3" Rotating flange bolts onto black-water valve. 1-1/2" Rotating flange bolts onto gray-water valve. 3" Lug fitting makes it easy to connect to your sewer hose.
These S-shaped ramps let you load ATVs, lawnmowers, and other wheeled equipment into your truck bed. Curved design makes it easier to push your cargo up the ramps, and it gives you more control while unloading.
Your ducted AC gave out, and now you need something that can actually push air through the vents again. This 18,000 Btu Chill Cube with a 17,000 Btu heat pump delivers steady cooling and heating without the constant cycling.Specs Capacity: Nominal cooling capacity: 18,000 BTU Nominal heating capacity: 17,000 BTU Dehumidification rate: 1.8 pints per hour Efficiency: Energy efficiency ratio (EER): 9.0 Airflow: 445 CFM Refrigerant: Refrigerant type: R32 Electrical: Electrical requirement: 115V, 60Hz Power consumption (cooling): 1,480 watts Cooling current draw: 15.8 amps Heating current draw: 11.9 amps Ratings and Certification: IP rating: IP24 Certification: CSA Dimensions: Overall dimensions: 29" wide x 14-1/2" tall x 29-1/2" deep Required cutout opening dimensions: 14-1/4" x 14-1/4" Weight: Net weight: 74.6 pounds Color: White Note: This system is not backwards compatible with any AC systems from 2024 and earlier.
Replaces (1) 60 mm x90 mm U-bolt for Thule Canyon XT roof cargo basket (TH859XT). Works with mounting plate and wing knobs (sold separately) to install cargo basket to crossbars.Features: Replaces (1) 60 mm x90 mm U-bolt for Thule Canyon XT roof cargo basket (TH859XT) Works with mounting plate and wing knobs to install cargo basket to crossbars (sold separately) Includes 1 U-bolt Fits: Part number TH859XT , Thule Canyon XT roof cargo basket
After a long drive, parking in a tight spot can feel overwhelming and test anyone's patience. The Force electric trailer dolly helps you skip the stress and arguments, letting you end the day with a real sense of homecoming and control.Specs: Capacity & Performance: Maximum trailer weight: 10,000 lbs Maximum tongue weight: 900 lbs Grade capability: up to 6% slope Drive speed: low 30 ft/min, high 60 ft/min Motor: 1.5 hp electric Battery: 12V U1 Interstate (includes voltmeter, charger, cables) Charge time: 6 to 8 hours Run time under load: 45 to 90 minutes Connection: Hitch ball sizes: 2" and 2-5/16" Ball mount connection height: 20" Receiver tube height: 18" Stablelock ball mount fits standard couplers 7-way plug for trailer brakes and lights Tires: Tire width: 6-1/2" Tire diameter: 16-1/2" Tire pressure: 60 PSI Construction & Dimensions: Overall dimensions: 55" tall x 20" wide x 30" long Weight: 120 lbs Material: steel Finish: powder-coated white Warranty: 2-year Notes: Not compatible with underslung Atwood couplers (Jayco Jay Flight and some other Jayco trailers) Always stay within rated capacity for safe use Not compatible with electric-over-hydraulic (EOH) braking systems.
The Equal-i-zer has a reputation as strong as its American-made steel. We love this hitch's solid build quality and that it helps to proactively stop trailer sway instead of just dampening it after it starts. Ball and shank included.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Built-in sway control stops trailer sway before it begins Maintains tension throughout the entire system Holds your trailer in line with rigid, frame-mounted brackets Uses steel-on-steel friction to combat any sway that occurs Compatible with surge-type brake actuators Desired head tilt is achieved using stackable washers Add or remove washers from the spacer rivet in the hitch head No-drill, clamp-on brackets can be adjusted along your trailer frame Accommodates frame-mounted items such as gas tanks, battery boxes, tool boxes, or generators Chromoly steel spring bars offer superior dexterity for a controlled, even ride without the bounce Dipped steel construction is durable and corrosion resistant System includes head assembly, adjustable shank, spring bars, sway control brackets, hitch ball, lift handle, pin and clip, and all necessary hardware 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation Made in the USA Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 600 lbs - 1,000 lbs Maximum gross towing weight: 10,000 lbs Ball size: 2-5/16" Sway control bracket positioning: 27" - 32" back from center of coupler Maximum trailer frame height: 6" Shank length: 12" Maximum rise: 7" from top of hitch receiver opening Maximum drop: 3" from top of hitch receiver opening Spring bar dimensions: 36" long x1-3/8" wide Limited lifetime warranty Included w/ System Required - Sold Separately Optional Add-Ons 90-00-1000 Equal-i-zer Weight Distribution Hitch Weight Distribution Shank Weight Distribution Head 2-5/16" Chrome Hitch Ball 2 Sway Control Brackets 2 Spring Bars Snap-up Lever Spacer Rivet and Washers Hitch Pin and Clip Necessary Installation Hardware n/a Thin Walled Socket for Installation of Hitch Ball Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12-1/4" x 3-3/8" Assemblies fit 16" or larger wheels. Backing plate has a 7-bolt pattern. Made in the USA.
Sleep soundly in your RV knowing that your family will be better protected with this accurate propane detector. When gas is detected, an LED and a loud horn immediately alert you so you can get to safety more quickly. Can replace almost any alarm.Features: Detector quickly warns you of hazardous levels of propane inside your RV or camper Helps keep your family safe and out of harm's way Uses less power than other detectors Highly selective sensor reduces the number of false alarms from non-threatening gases Solid red LED light and continuous horn alert you to propane gas Button on the front lets you test the detector to make sure it's working properly Also can silence the alarm up to 5 minutes for non-urgent situations Compact, slim design helps save wall space in your RV Durable polycarbonate construction in black Easy installation onto the wall - 2 wires hook up to your battery Can replace 90% of all detectors with universal mounting brackets Mounts 4" - 18" above the floor Does not include flat 1/2" self-tapping screws ETL and cETL listed, and exceeds UL 2034 and 1484 and CSA 6.19.01 requirements Specs: Alarm dimensions: 4-1/4" long x 2-5/8" wide x1/2" thick Mounting bracket dimensions: Larger bracket: 7-1/4" long x 3-3/8" wide Smaller bracket: 5-3/4" long x 4-1/4" wide Mounting hole spacing (center on center): Alarm: 3-5/8" Larger bracket: 6" Smaller bracket: 5-1/4" RV voltage requirement: 8V-15 V DC LP sensitivity: as low as 4200 ppm Current draw: 17 mA at 13.5V Alarm intensity: 85 dB Lifespan: 5 years Operational temperature range: -40 degrees F to 150 degrees F (-40 degrees C to 66 degrees C) 1-Year limited warranty Having a propane gas leak in your RV is a scary situation that you don't want to even think about let alone experience.
Stay cool when hot, muggy days settle into your RV. This complete 18K ducted Chill Cube kit includes the rooftop AC, low-profile air distribution box, and remote, with variable-speed cooling that helps manage heat and moisture. White shroud.Specs Included: Rooftop air conditioner with heat pump Low-profile ducted air distribution box Remote control Capacity: Nominal cooling capacity: 18,000 BTU Nominal heating capacity: 17,000 BTU Dehumidification rate: 1.8 pints per hour Efficiency: Energy efficiency ratio (EER): 9.0 Airflow: 445 CFM Refrigerant: Refrigerant type: R32 Electrical: Electrical requirement: 115V, 60Hz Power consumption while cooling: 1,480 watts Cooling current draw: 15.8 amps Heating current draw: 11.9 amps Air distribution box electrical rating: 115V, 60Hz Ratings and Certification: IP rating: IP24 Certification: CSA Dimensions: Air conditioner: 29" wide x 14-1/2" tall x 29-1/2" deep Air distribution box: 18-1/4" wide x 18-1/4" long x1/2" deep Required cutout opening dimensions: 14-1/4" x 14-1/4" Weight: Air conditioner net weight: 74.6 lbs Color: Air conditioner: white Air distribution box: white Note: This system is not backward compatible with Furrion AC systems from 2024 and earlier.
This RV fresh-water plumbing 90-degree elbow coupler features (2) 1/2" barbed connections. Polypropylene material is suitable for repairing or installing new lines your fresh-water system.
Stay cool when hot, muggy days settle into your RV. This complete 18K ducted Chill Cube kit includes the rooftop AC, low-profile air distribution box, and remote, with variable-speed cooling that helps manage heat and moisture. Black shroud.Specs Included: Rooftop air conditioner with heat pump Low-profile ducted air distribution box Remote control Capacity: Nominal cooling capacity: 18,000 BTU Nominal heating capacity: 17,000 BTU Dehumidification rate: 1.8 pints per hour Efficiency: Energy efficiency ratio (EER): 9.0 Airflow: 445 CFM Refrigerant: Refrigerant type: R32 Electrical: Electrical requirement: 115V, 60Hz Power consumption while cooling: 1,480 watts Cooling current draw: 15.8 amps Heating current draw: 11.9 amps Air distribution box electrical rating: 115V, 60Hz Ratings and Certification: IP rating: IP24 Certification: CSA Dimensions: Air conditioner: 29" wide x 14-1/2" tall x 29-1/2" deep Air distribution box: 18-1/4" wide x 18-1/4" long x1/2" deep Required cutout opening dimensions: 14-1/4" x 14-1/4" Weight: Air conditioner net weight: 74.6 lbs Color: Air conditioner: black Air distribution box: white Note: This system is not backward compatible with Furrion AC systems from 2024 and earlier.
This RV fresh-water plumbing 90-degree adapter coupler features a 1/2" MPT connection and a 1/2" barbed connection. Polypropylene material is suitable for repairing or installing new lines your fresh-water system.
Filters
