This 93-1/2" long section of corner screw cove trim covers screws, cracks, and cut edges around the cabinets in your enclosed trailer. Aluminum is sturdy and lightweight. Trim can be cut to fit your specific application.Features: Corner screw cove trim conceals screws, cracks, and cut edges around the cabinets in your enclosed trailer Aluminum construction is sturdy and lightweight Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 7/8" tall x 3/8" deep Made in the USA
Adds a reflector to your trailer so you can tow safely and legally.Features: Circular reflector Red Center screw mounting 1/4" Diameter DOT compliant Meets FMVSS 108 requirements Dimensions: 2-3/8" diameter
... Installs in 5" duct openings on your wall or ceiling with included hardware, and dampers snap over the top to hide the screws.Features: Rotating RV vent fits 5" duct openings Dampers can be pushed open and closed with a finger and rotated 360 degrees Bezel mounts into the wall or ceiling and dampers snap over the top Hides the included mounting hardware for a sleek look Durable medium white plastic construction Made in the USA Specs: Overall dimensions: 6-7/8" diameter x 1-1/8" deep Grille diameter: 5" Mounting dimensions: 5-13/16" diameter x 13/16" deep 1-Year warranty
... Installs in 4" duct openings on your wall or ceiling with included hardware, and grille snaps over the top to hide the screws.Features: Rotating RV vent fits 4" duct openings Louvered grille rotates 360 degrees Bezel mounts into the wall or ceiling and grille snaps over the top Hides the included mounting hardware for a sleek look Durable black plastic construction Made in the USA Specs: Overall dimensions: 5-1/2" diameter x 2-3/16" deep Grille diameter: 4-7/8" Mounting dimensions: 4" diameter (w/ tabs 4-3/8") x 2-3/16" deep Mounting holes: 4-1/2" center-to-center 1-Year warranty
... Installs in 4" duct openings on your wall or ceiling with included hardware, and grille snaps over the top to hide the screws.Features: RV vent fits 4" duct openings Dampers can be pushed open and closed by squeezing the levers Bezel mounts into the wall or ceiling and grille snaps over the top Hides the included mounting hardware for a sleek look Durable black plastic construction Made in the USA Specs: Overall dimensions: 5-3/8" diameter x 2-7/8" deep Overall depth with levers: 4" Grille diameter: 3-3/4" Mounting dimensions: 3-13/16" diameter x 2-1/2" deep Mounting holes: 3-1/8" center-to-center 1-Year warranty <
... Installs in 5" duct openings on your wall or ceiling with included hardware, and dampers snap over the top to hide the screws.Features: Rotating RV vent fits 5" duct openings Dampers can be pushed open and closed with a finger and rotated 360 degrees Bezel mounts into the wall or ceiling and dampers snap over the top Hides the included mounting hardware for a sleek look Durable light beige plastic construction Made in the USA Specs: Overall dimensions: 6-7/8" diameter x 1-1/8" deep Grille diameter: 5" Mounting dimensions: 5-13/16" diameter x 7/8" deep 1-Year warranty
... Installs in 4" duct openings on your wall or ceiling with included hardware, and grille snaps over the top to hide the screws.Features: Rotating RV vent fits 4" duct openings Louvered grille rotates 360 degrees Bezel mounts into the wall or ceiling and grille snaps over the top Hides the included mounting hardware for a sleek look Durable beige plastic construction Made in the USA Specs: Overall dimensions: 5-1/2" diameter x 2-1/8" deep Grille diameter: 4-7/8" Mounting dimensions: 4" diameter x 2-1/8" deep Mounting holes: 4-1/2" center-to-center 1-Year warranty
... Installs in 4" duct openings on your wall or ceiling with included hardware, and grille snaps over the top to hide the screws.Features: RV vent fits 4" duct openings Dampers can be pushed open and closed by squeezing the levers Bezel mounts into the wall or ceiling and grille snaps over the top Hides the included mounting hardware for a sleek look Durable white plastic construction Made in the USA Specs: Overall dimensions: 5-3/8" diameter x 2-7/8" deep Overall depth with levers: 4" Grille diameter: 3-3/4" Mounting dimensions: 3-13/16" diameter x 2-1/2" deep Mounting holes: 3-1/8" center-to-center 1-Year warranty
Twist the vent to direct fresh filtered air where you want it to keep things comfy. The washable foam filter ensures you have clean air blowing through your RV. Installs with hidden fasteners in 5" duct openings - hardware included.Features: Rotating RV vent fits 5" duct openings Louvered grille rotates 360 degrees Removable filter keeps air fresh and clean Foam filter is washable to promote a healthier environment Bezel mounts into the wall or ceiling with included hardware Hides the included mounting hardware for a sleek look Durable light beige plastic construction Made in the USA Specs: Overall dimensions: 7" diameter x 1-1/8" deep Grille diameter: 5-1/4" Mounting dimensions: 5-7/8" diameter x 7/8" deep 1-Year warranty
... Installs in 5" duct openings on your wall or ceiling with included hardware, and dampers snap over the top to hide the screws.Features: Rotating RV vent fits 5" duct openings Dampers can be pushed open and closed with a finger and rotated 360 degrees Bezel mounts into the wall or ceiling and dampers snap over the top Hides the included mounting hardware for a sleek look Durable white plastic construction Made in the USA Specs: Overall dimensions: 6-7/8" diameter x 7/8" deep Grille diameter: 5" Mounting dimensions: 5-13/16" diameter x 13/16" deep 1-Year warranty
... Installs in 4" duct openings on your wall or ceiling with included hardware, and grille snaps over the top to hide the screws.Features: RV vent fits 4" duct openings Dampers can be pushed open and closed by squeezing the levers Bezel mounts into the wall or ceiling and grille snaps over the top Hides the included mounting hardware for a sleek look Durable beige plastic construction Made in the USA Specs: Overall dimensions: 5-1/2" diameter x 2-1/2" deep Overall depth with levers: 4" Grille diameter: 3-1/8" Mounting dimensions: 3-3/4" diameter x 2-1/2" deep Mounting holes: 3-1/8" center-to-center 1-Year warranty
... Installs in 4" duct openings on your wall or ceiling with included hardware, and grille snaps over the top to hide the screws.Features: RV vent fits 4" duct openings Dampers can be pushed open and closed by squeezing the levers Bezel mounts into the wall or ceiling and grille snaps over the top Hides the included mounting hardware for a sleek look Durable brown plastic construction Made in the USA Specs: Overall dimensions: 5-3/8" diameter Grille diameter: 3-3/4" Mounting dimensions: 3-13/16" diameter x 2-1/2" deep Mounting holes: 3-1/8" center-to-center 1-Year warranty
... Installs in 4" duct openings on your wall or ceiling with included hardware, and grille snaps over the top to hide the screws.Features: Rotating RV vent fits 4" duct openings Louvered grille rotates 360 degrees Bezel mounts into the wall or ceiling and grille snaps over the top Hides the included mounting hardware for a sleek look Durable walnut plastic construction Made in the USA Specs: Overall dimensions: 5-5/8" diameter x 2-1/2" deep Grille diameter: 4" Mounting dimensions: 3-15/16" diameter x 2-3/16" deep Mounting holes: 4-15/16" center-to-center 1-Year warranty
Replace a damaged plumbing vent on your RV with this original factory replacement. Includes screws and putty for a leak-proof installation. Polar white color complements your RV.Features: Installation kit provides everything you need to replace your RV's plumbing vent Putty tape creates a seal between the vent and your RV roof Fits 1" to 2-3/8" pipe (outside diameter) 6 Screws included Polar white color complements your RV 40033 Camco Motor Home Replacement Plumbing Vent with Putty and Screws - Polar White
These slotted, round-head wood screws are designed to work on wood or similar materials. Sharp points at the tip help you to get them started.Features: For wood or similar material Round head sits flush with surface Standard slot for screwdriver Sharp point eases starting Size: #8 x 3/4" Note: Drill a starter hole slightly smaller than the diameter of the screw to avoid splitting material.
Resistant to corrosion, these zinc-coated sheet metal screws perform well in outdoor applications, where they will be exposed to the weather. Hex-shaped and slotted heads can be turned with a screwdriver or a wrench.Features: Screw head sits flush on surface Slotted, hex-shaped head can be turned with a standard screwdriver or a wrench Sharp point eases starting Size: #8 x 3/4"
... Screw holes for surface mounting. Meets FMVSS requirements.Features: Red trailer reflector enhances visibility on the road Durable acrylic construction Adhesive backing allows for easy stick-on application Screw holes allow for surface mounting - hardware not included Meets FMVSS 108 when properly applied Specs: Dimensions: 4-3/8" long x 1-15/16" wide Distance between mount holes (center on center): 4-5/16" 1-Year limited warranty
... Screw holes for surface mounting. Meets FMVSS requirements.Features: Amber trailer reflector enhances visibility on the road Durable acrylic construction Adhesive backing allows for easy stick-on application Screw holes allow for surface mounting - hardware not included Meets FMVSS 108 when properly applied Specs: Dimensions: 4-3/8" long x 1-15/16" wide Distance between mount holes (center on center): 4-5/16" 1-Year limited warranty
Flush mounted latch with stainless steel spring, rustproof finish and locking cylinder. Mounts in 3-3/8" x 4-5/8" hole.Features: Plain, rustproof finish Specs: Mounts in 3-3/8" x 4-5/8" hole Mounts with one way screws or pop rivets (not included) This handle will work on doors up to 1-1/16 inches thick L3980, Door Latch, Paddle "STD" Locking, Plain Steel
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.
... This vent cover keeps air moving and water out, so the inside stays fresh, no matter what's happening outside. You'll forget it's there. That's exactly the point.It's the kind of part you install once and forget about, because it keeps doing what it's supposed to no matter what the highway throws at it. Specs Dimensions: Outside dimensions: 4-3/8" wide x 4" tall Cover depth from RV wall: 3/4" Hole Coverage: Covers vent holes up to 3-1/2" Mounting: 3-hole screw pattern Hole spacing (center on center): 3-7/16" Included Hardware: Mounting screws Color: Black
8-1/16" x 2-7/8". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate for trailers wider than 80". ... Features: Rectangular trailer tail light serves 8 functions Stop light, tail light, turn signal light, side marker light, side reflex reflector, rear clearance light, rear reflex reflector, and license plate illuminator Sealed, waterproof construction is submersible Light is designed specifically for boat trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Acrylic lens screws on and can be easily replaced Durable plastic housing Red lens over white LEDs Mounts on surface of trailer - hardware included 3-Wire pigtail White wire for ground Brown wire for tail Green wire for stop/turn signal DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Designed for use on trailers over 80" wide when properly mounted P2PC rated Specs: Configuration: driver's side (left-hand side) Passenger's-side light (STL16RB) sold separately Dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Diodes: 22 Power draw at 12.8 volts: Stop/turn signal light: 0.259 amps Tail light: 0.062 amps Quantity: 1 Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
6-1/8" x 4-9/16" Square. Waterproof LED tail light acts as brake, tail, turn, side marker, side reflector, rear clearance, rear reflector, and license plate light for trailers over 80" wide. ... For proper mounting, the lights must be installed at the widest points on the rear of the trailer - one on each corner.
Filters
