Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
It's pretty simple. A 4-bolt rail uses four 5/8 inch bolts ran through the floor of the truck bed into the frame brackets. The bolts run down through the center of the raised part of the rail, as shown in the photo I provided. A 10-bolt rail uses…
view full answer...Since the Titan Zinc-Plated Brake Actuator #T4750820 that you referenced has a weight capacity of 12,500 lbs and a tongue weight capacity of 1,250 lbs it will serve well as a replacement actuator for your application. The mounting holes are spaced…
view full answer...The Titan Actuator part #T4750820 would be a great solution for replacing the GDC 120 you have on your triple axle boat trailer. It has more than enough capacity and is a very reliable actuator.
view full answer...For your Optronics light part as2t216 we have found that the correct replacement lens is the part #AST60B.
view full answer...Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…
view full answer...Hello Vince, thanks for reaching out. The part number 414849 comes back as a Parker brand hydraulic pump motor. Lippert actually makes a direct replacement for this, and for that you will need the following: - Replacement Hydraulic Pump Motor for…
view full answer...For your application I recommend using the Titan Actuator #T63FR if you have drum brakes or the Dexter DX7.5 #099-175-20 if you have disc brakes. These are rated for 7,500 lbs and fit a 2" hitch ball which should match up just fine for your 2007…
view full answer...I recommend to measure the inside diameter of your hub bore to switch out the oil bath caps with threaded Bearing Buddy Bearing Protectors. The closest we have to the 3.3 inches that would thread into your oil bath hub is Bearing Buddy Bearing…
view full answer...You are correct, in 2014 VPG changed their name to Mobility Ventures and started to produce the MV-1 again. The Curt Trailer Hitch Receiver - Custom Fit - Class III #C13122 you were looking at is confirmed to fit the 2011-2012 VPG MV-1 and 2014-2018…
view full answer...Hi Mike; the best option for your 2025 Silverado 2500 ZR2 is definitely the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 you looked at. These are going to be the most reliable and durable air bags out there. With a max psi of…
view full answer...Hello Michell, thanks for reaching out. The Air Lift #AL88365 you mentioned is the correct kit for a 2018 Ram 1500 eco diesel. This is the LoadLifter 5000 Ultimate kit meaning the springs have internal jounce bumpers. These help to improve stability…
view full answer...At this time we do not carry a compatible inner member for your Reliable ACT 7.5 KS actuator so I recommend replacing it with the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX89FR. This hydraulic actuator activates trailer's brakes…
view full answer...