Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 4,400-lb E-Z Lube axles. Inner bearing (L68149) and race, outer bearing (LM67048) and race, grease seal (10-19), grease cap (21-42-1), and lug nuts included.If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Use integrated switch or wire to a light switch to turn this single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.Features: Single dome light is perfect underneath a kitchen cabinet or above a shower in your RV Included energy-efficient, warm white LEDs last longer and burn brighter than incandescent bulbs Integrated toggle switch lets you turn the light on and off Can also be wired to an interior, dimmable light switch Clear plastic lens is less likely to shatter than a glass lens Textured pattern helps disperse bright light throughout your RV Durable, white polycarbonate plastic construction Easy, bolt-on installation onto the surface of your ceiling or wall - hardware not included 2-Wire design - white for ground and black for power Specs: Overall dimensions: 6-3/8" long x 4-3/16" wide x 1-13/16" deep Mounting hole spacing (center to center): Up and down: 2-3/4" Side by side: 2-9/16" Voltage: 12V DC Power draw at 12.8V: 0.3 amps Light output: Raw lumens: 460 lumens Effective lumens: 407 lumens Color temperature: 3,150 Kelvin Number of LEDs: 9 Lifetime warranty on LEDs Need extra light over your camper kitchen sink for when you do the dishes?
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter EZ-Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
... Tow up to 7,500 lbs with the 2" ball or 18,000 lbs with the 2-5/16" ball.The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers. Easily Adjusts and Stows To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top.
... Tow up to 7,500 lbs with the 2" ball or 18,000 lbs with the 2-5/16" ball.The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers. Easily Adjusts and Stows To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top.
Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball.The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers. Easily Adjusts and Stows To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top.
White powder coated, 15" steel wheel features a 5 on 5 bolt pattern and meets Department of Transportation standards.Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern. If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Engineered to work with GM MultiPro tailgates.Features: Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Engineered to work with all GM MultiPro tailgates Stowable design lets you store ball and mounting platform underneath your vehicle Remove pins holding ball mount platform in place on shank Flip platform underneath the hitch Reinsert pins and clips to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount up or down along shank and secure in place with included pins and clips 3 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pin, rotate balls, and reinsert pin Dual-process chrome plating on balls provides excellent rust resistance Black powder coated steel shank is corrosion resistant Stainless steel pins create sturdy, rust-resistant connections Durable steel construction with high yield tubing offers superior strength Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: When used with 1-7/8" ball: 3,500 lbs When used with 2" ball: 7,500 lbs When used with 2-5/16" ball: 10,000 lbs Distance from center of hitch pin hole to center of hitch ball: Hitch pin hole closest to ball: 9-1/4" Hitch pin hole farthest from ball: 10-3/8" Distance from center of hitch pin hole to pin hole in mounting block: Pin hole closest to mounting block: 3-3/4" Pin hole farthest from mounting block: 4-7/8" Distance from center hitch pin hole to back of upright: Pin hole closest to upright: 3" Pin hole farthest from upright: 4-1/8" Maximum drop: 4-1/2" Maximum rise: 5-1/2" Incremental height adjustment: 1" Limited lifetime warranty Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
... Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 18,000 lbs with the 2-5/16" ball.The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers. Easily Adjusts and Stows To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top.
Here's your versatile solution for safe towing! This aluminum hitch has a built-in gauge for measuring tongue weight, comes with two stainless steel tow balls that swap out easily, and includes locking pins to keep everything securely attached.Features: Ball mount with included hitch ball lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Tongue weight scale built into the ball mount platform helps you balance your trailer Safety first - a quick way to check if your load needs any adjustments before hitting the road Super simple to use - just couple your trailer and you'll get an automatic measurement every time No more messing around with separate scales - it makes everything so much easier Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount platform up or down shank and secure in place with included locking dual pins 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove the slider and pull out the ball retaining pin to release the tow ball, drop the new one in, and reinsert the pin Locking pin set deters theft and is keyed alike Hitch receiver lock secures ball mount shank to hitch receiver Locking dual pins secure platform securely to shank 4 Keys included Solid block construction is strong while staying lightweight Shank and mounting platform are made from tough 6061 T6 billet aluminum Stainless steel hitch balls are corrosion resistant SAE J684 certified and VESC Regulations V-5 compliant Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: 2-5/16" Ball: 18,500 lbs 2" Ball: 10,000 lbs Maximum tongue weight: 2,200 lbs Distance from center of hitch pin hole to center of hitch ball: Hitch pin hole closest to ball: 8-1/2" Hitch pin hole farthest from ball: 9-5/8" Maximum drop: 4" Maximum rise: 5" Incremental height adjustment: 1" Limited lifetime warranty Effortless Tongue Weight Management Remember when gauging your trailer's tongue weight was such a hassle?
... Tow up to 8,000 lbs with the 2" ball or up to 18,500 lbs with the 2-5/16" ball.This ball mount features a 2" and 2-5/16" hitch ball on opposite ends of the ball mount platform. Switching to the opposite ball is fast and easy - pull out the dual pins and remove the platform from the shank and simply flip over the platform, so that either the 2" or 2-5/16" hitch ball is on top.
... Tow up to 7,500 lbs with the 2" ball or 10,000 lbs with the 2-5/16" ball. Features the Browning logo.Features: Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides a connection point for trailer coupler Stowable design lets you store ball and mounting platform underneath your vehicle Remove pins holding ball mount platform in place on shank Flip platform underneath the hitch Reinsert pins and clips to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount up or down along shank and secure in place with included pins and clips 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pin, rotate balls, and reinsert pin Officially licensed gold-colored Browning logo is on front of shank Chrome-nickel plating on balls provides rust resistance Powder coated shank is rust resistant Stainless steel pins create sturdy, rust-resistant connections Durable steel construction with high yield tubing offers superior strength Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 2" Ball: 7,500 lbs 2-5/16" Ball: 10,000 lbs Distance from center of hitch pin hole to center of hitch ball: Hitch pin hole closest to ball: 9-3/8" Hitch pin hole farthest from ball: 10-3/8" Distance from center of hitch pin hole to pin hole in mounting block: Pin hole closest to the mounting block: 3-3/4" Pin hole farthest from the mounting block: 4-3/4" Maximum drop: 5" Maximum rise: 5-1/2" Incremental height adjustment: 1" Lifetime limited warranty Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
... Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 14,500 lbs with the 2-5/16" ball.The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers. Easily Adjusts and Stows To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top.
Silver powder coated, 15" steel wheel features a 5 on 5 bolt pattern and meets Department of Transportation standards.Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern. If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Your old drum is worn and the brakes start grabbing or pulsing. You install this 10" hub and drum with a 5 on 5 bolt pattern. Pre-greased bearings and a setup that matches your 3,500 lb axle give you smooth braking again.If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
This 15" x 5" steel trailer wheel has a 5 on 5 bolt pattern and a 3.19" pilot diameter. Improved torque retention keeps wheel secure when mounted on your axle. ... Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern. If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
... Tow up to 8,000 lbs with the 2" ball or up to 18,500 lbs with the 2-5/16" ball.This ball mount features stainless-steel 2" and 2-5/16" hitch balls on opposite ends of the ball mount platform. Switching to the opposite ball is fast and easy - pull out the dual pins and remove the platform from the shank and simply flip over the platform so that either the 2" or 2-5/16" hitch ball is on top.
... Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 10,000 lbs with the 2-5/16" ball.Features: Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides a connection point for trailer coupler Stowable design lets you store ball and mounting platform underneath your vehicle Remove pins holding ball mount platform in place on shank Flip platform underneath the hitch Reinsert pins and clips to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount up or down along shank and secure in place with included pins and clips 3 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pin, rotate balls, and reinsert pin Officially licensed gold-colored Browning logo is on front of shank Chrome-nickel plating on balls provides rust resistance Powder coated shank is rust resistant Stainless steel pins create sturdy, rust-resistant connections Durable steel construction with high yield tubing offers superior strength Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 1-7/8" Ball: 3,500 lbs 2" Ball: 7,500 lbs 2-5/16" Ball: 10,000 lbs Distance from center of hitch pin hole to center of hitch ball: Hitch pin hole closest to ball: 9-1/4" Hitch pin hole farthest from ball: 10-3/8" Distance from center of hitch pin hole to front of mounting block: Pin hole closest to the mounting block: 4-1/2" Pin hole farthest from the mounting block: 5-5/8" Maximum drop: 5" Maximum rise: 5-1/2" Incremental height adjustment: 1" Lifetime limited warranty Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle. Stow the ball and mounting platform on this dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Works with GM MultiPro tailgates.Features: Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Engineered to work with all GM MultiPro tailgates Stowable design lets you store ball and mounting platform underneath your vehicle Remove pins holding ball mount platform in place on shank Flip platform underneath the hitch Reinsert pins and clips to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount up or down along shank and secure in place with included pins and clips 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pin, rotate balls, and reinsert pin Dual-process chrome plating on balls provides excellent rust resistance Black powder coated shank is corrosion resistant Stainless steel pins create sturdy, rust-resistant connections Durable steel construction with high yield tubing offers superior strength Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: When used with 2" ball: 7,500 lbs When used with 2-5/16" ball: 10,000 lbs Maximum drop: 4-1/2" Maximum rise: 5-1/2" Incremental height adjustment: 1" Limited lifetime warranty Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
This 15" x 5" steel trailer wheel has a 5 on 5 bolt pattern and a 3.19" pilot diameter. White powder coat finish is rust resistant.Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern. If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Built for life on the water, this rustproof aluminum wheel resists corrosion, making it ideal for boat trailers. The 5 on 4-1/2 bolt pattern ensures a secure fit, while steel inserts reduce wear and maintenanceso you can focus on the adventure ahead.Enjoy a relaxed towing experience with less hassle and more reliability. Specs Dimensions Rim dimensions: 14" diameter x 5.5" wide Pilot diameter: 3.19" Bolt Pattern Bolt pattern: 5 on 4-1/2" Wheel bolt size: 1/2"-20 Load Rating Load rating: 2,150 lbs Warranty 2-Year limited warranty
Filters
