Adapts your Roadmaster BlackHawk, BlackHawk All-Terrain, Falcon, Falcon All-Terrain, or Sterling so you can use it with a Demco base plate. Check tow bar serial number for compatibility.Features: Lets you use select Roadmaster tow bars with Demco base plates BlackHawk BlackHawk All-Terrain Falcon Falcon All-Terrain Sterling with serial numbers up to 14,500 For Sterling tow bars with serial numbers above and including 14,501, see RM-034-5 Made in the USA Limited Lifetime Warranty
Simple yet tough, this tow bar is engineered to be easy to hook up. The extra-long arms help you make tight turns. Stores conveniently on the back of your RV: push the arms up and the holding latch will automatically lock into place.It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up. To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
Adapts your Roadmaster BlackHawk All-Terrain, Sterling, or Nighthawk tow bar so you can use it with a Demco base plate. Check Blackhawk All-Terrain or Sterling tow bar serial number for compatibility.Features: Lets you use your Roadmaster BlackHawk All-Terrain, Sterling, or Nigthhawk tow bar with Demco base plates Blackhawk All-Terrain tow bar must have serial number above 16,500 Sterling tow bar must have serial number above 14,500 For Sterling tow bar with serial number below 14,500, use RM-034 Made in the USA
Replaces 2 keys for your Benton ShellRaiser rooftop cargo box. Key number 034.Features: Replaces 2 keys for your Benton ShellRaiser rooftop cargo box Key number 034
Lightweight and rustproof aluminum tow bar is designed to be easy to hook up and disconnect. Integrated cable guides keep your setup streamlined and tangle-free. Required safety cables and electrical cord included.Features: Safely bring your vehicle along behind your RV Easy hookup with arms that smoothly extend and pivot to reach the base plate Stainless steel construction of inner arms lets them slide in and out Self-aligning arms automatically lock into towing position when you pull forward Extra-long arms help you make tight turns Quick disconnect, even on rough terrain, with non-binding levers Built-in cable guides prevent included electrical cord and safety cables from getting damaged or tangled Safety cables are vinyl-coated to resist corrosion Spring-loaded latches prevent the hooks from disconnecting 6-Way plug required for your electrical cord is included Engineered to be super tough FEA testing guarantees a strong finished product Self-lubricated nylon bushings eliminate friction between the inner and outer arms for a longer-lasting, better-functioning system Lightweight, aircraft-grade aluminum body is durable and rustproof High-tech powder coat finish protects against scratches and dings Easy storage on the back of your RV Push arms up so the holding latch snaps into place and then fold them left or right Made in the USA Specs: Fits: Roadmaster base plates Crossbar-Style (EZ, EZ2, EZ4, Classic, and XL) base plates require the quick-disconnect assembly (910021-00 - sold separately) Can be used with base plates from other manufacturers with adapter (sold separately) Application: 2" x 2" trailer hitch receivers Arm length (as measured from center of hitch pin hole to center of quick-disconnect bar): Extended: 50-1/2" Retracted: 37-1/2" Weight capacity: 8,000 lbs Weight: 35 lbs Limited lifetime warranty Fits etrailer, Blue Ox, and Demco Base Plates with Adapter Base Plate Adapter etrailer Classic: e98984 Invisible: DM9523062 Blue Ox RM-031, RM-031-5, or BX88151 Demco Tabless: DM9523062* Classic: RM-034, RM-034-5, or DM9523036 *For serial numbers below 14,500, use adapter DM9523036 Smooth Hookup with Stainless Steel Arms The Sterling is designed to make hooking up your toad a smooth and easy process.
This aluminum tow bar is the absolutely snazziest tow bar you can get. Sleek, lightweight, with built-in LEDs for increased visibility and safe driving at night. The electrical cord comes installed in the cable guide, keeping your setup organized.Features: Safely bring your heavy vehicle along behind your RV Built-in LED light strips increase visibility and safety by alerting other drivers that you're towing a vehicle Easy hookup with arms that smoothly extend and pivot to reach the base plate Stainless steel construction lets the inner arms slide in and out Self-aligning arms automatically lock into towing position when you pull forward Extra-long arms help you make tight turns Quick disconnect, even on rough terrain, with non-binding levers Cable guides keep included power cord from getting damaged or tangled Included 6-way plug installs on the front of your vehicle Coiled safety cables won't drag as you tow Vinyl-coated to resist corrosion Spring-loaded latches prevent the hooks from disconnecting Can be threaded through the cable guides to keep them organized Engineered to be super tough FEA testing guarantees a strong finished product Self-lubricated nylon bushings eliminate friction between the inner and outer arms for a longer-lasting, better-functioning system Lightweight, aircraft-grade aluminum body is durable and rustproof Black matte powder coat finish protects against scratches and dings Easy storage on the back of your RV Push arms up so the holding latch snaps into place and then fold them left or right Made in the USA Specs: Fits: Roadmaster base plates Crossbar-Style (EZ, EZ2, EZ4, Classic, and XL) base plates require the quick-disconnect assembly (910021-00 - sold separately) Can be used with base plates from other manufacturers with adapter (sold separately) Application: 2" x 2" trailer hitch receivers Arm length (from center of hitch pin hole to center of base pin hole when lined up with arm straight): Extended: 52" Retracted: 40-1/2" Weight capacity: 8,000 lbs Weight: 50 lbs Limited lifetime warranty Fits etrailer, Blue Ox, and Demco Base Plates with Adapter Base Plate Adapter etrailer Classic: e98984 Invisible: e98984 Blue Ox RM-031-5 Demco Tabless: DM9523062 Classic: RM-034-5 or DM9523062 Built-in LED Light Strips This is the coolest feature you didn't know you needed.
If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The oversized base plate gives you a solid foundation on the trail. And it only takes up about one cubic foot when stored.Specs Capacity and Lift: Weight capacity: 6 tons Lift: 8-1/2" to 37-3/4" Dimensions: Base plate: 8" long x 7" wide x 5/16" thick Carry bag: 12-5/8" long x 9-7/16" wide x 10-1/4" tall Warranty: 1-year limited Note: This jack is designed to lift and stabilize 6 tons and should not be used to lift over that weight.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.That done, download the OneControl app on your Apple or Android smartphone and wirelessly pair the unit to your phone via Bluetooth, following the in-app instructions. It should take about 5 seconds for them to pair. Once paired, the LED light on the unit will turn a solid blue. Plug in your trailer's 7-way and let the whole system calibrate for another 5 seconds.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH12) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16", and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
We've dealt with the rattles, the clanks, and the frustration of constant swaps, so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.Specs Compatibility Fits standard 2" hitch receivers Receiver must have a collar around opening to work Fits collars up to 7/8" thick and 3-1/4" wide Material & Finish Steel with a matte black powder coat and e-coat Weight Capacity 5,000 lbs Warranty Limited lifetime Notes: This will not work when using a weight distribution system. Some OE hitches have tolerances that will not allow for the use of this anti-rattle collar.
This kit includes a junction box so you can quickly and easily connect the wires from the included trailer connector to your trailer's wiring.Features: Kit allows you to upgrade from a 4-way, 5-way, or 6-way connector to a 7-way connector Pre-wired, 7-way, blade-style, trailer-end connector lets you connect your trailer to your vehicle Flexible cable allows for easy positioning Weatherproof, heavy-duty plastic junction box protects wires and terminals from the elements Wire functions: Black: 12 volt power Yellow: auxiliary or reverse signal Red: left brake and turn signal Green: running lights Brown: right brake and turn signal Blue: trailer brakes Ring terminals included Specs: Overall box dimensions: 8-1/8" long x 3-3/8" wide x 2-5/16" tall Distance between mounting holes (on center): 7-3/8" Lid dimensions: 6-5/8" long x 3-3/8" wide Cord dimensions (not including junction box): 5'-5" long x 5/8" diameter Overall length including junction box: 6'
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems Connects directly to your battery to avoid overloading your vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring with the included quick-splice connectors Color-coded wires and wiring guide ease installation Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Installation To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Kit works with your factory-installed Ford, GMC, Chevy, or Nissan Titan XD underbed gooseneck trailer hitch. Includes a ball with an easy-to-use handle and ball-bearing locking system, rubber ball hole cover, 2 safety-chain loops, and storage case.Features: Kit works with factory-installed gooseneck hitches on Ford, GM, Chevy, and Nissan Titan XD trucks Pop-in ball fits securely in gooseneck receiver and is easy to insert and remove Built-in-ball-bearing system holds ball in place in receiver Handle provides leverage for operation and a clean way to carry the ball Handle locks in horizontal position to prevent accidental unlatching 2 Safety-chain hookups attach directly to receivers built into gooseneck rails for simple mounting and removal Safety chain anchors accommodate commercially available safety chain hooks (sold separately) Internal and external components are plated or made from stainless steel for corrosion protection Rubber cover keeps dirt and debris out of ball hole when ball is removed Storage case keeps ball, safety chain loops, and rubber cover in good condition when not in use Made in the USA Specs: Gross towing weight: 30,000 lbs Capacity is limited to that of your hitch Ball size: 2-5/16" Limited lifetime warranty
You just backed your rig in, it's hot, and you aren't in the mood to crawl around in the gravel. Sound familiar? Skip the jack-lugging and crank-crawling. Grab your drill and drop both legs from one side before your drink has time to sweat.It's not as fast, but it's reliable when you need it. Specs Dimensions: Retracted: 76-5/8" long x 14" wide x 6-1/4" tall Extended: 76-5/8" long x 14" wide x 26-5/8" tall Extension: 20-1/4" Footplate dimensions: 7-1/2" long x 4" wide Drill Compatibility: Cordless, non-impact drill: 18V to 24V Includes socket-bit adapter Mounting: Bolt-on installation Requires (4) 1/2"-13 bolts (typically 2"-3" long), plus washers and nuts Compatible with most trailer frame widths Weight Capacity: Stabilizes your trailer, but isn't built for lifting or leveling.
Use with your Dexter electric-over-hydraulic brake actuator to bring your single- or tandem-axle trailer to a stop should it become disconnected from your tow vehicle. System includes charger that maintains battery.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Designed for use with Dexter electric-over-hydraulic brake actuators (K71-650 and K71-651) Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge the battery Mounts to the inside of your trailer's frame or camper compartment Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, charger, battery box, breakaway switch, wiring, and breakaway cable Department of Transportation (DOT) compliant Made in the USA Specs: Application: single- and tandem-axle trailers Battery: Voltage: 12V Type: sealed lead acid Capacity: 9 amp-hours Breakaway cable length: 46" Breakaway switch dimensions: 3" long x 1-1/2" wide Breakaway switch lead wire length: 45" Charger lead wire length: 14" Battery box dimensions: 6-5/16" long x 3-3/4" wide x 5-3/4" tall Battery box mounting hole spacing: From center-to-center vertically: 3" From center-to-center horizontally: 7" Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
This shock-absorbing pin box works with your gooseneck hitch to give a smooth ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. Auto-latch allows for easy hookup. 4.5K pin weight.Features: 5th-Wheel-to-gooseneck adapter box lets you tow your 5th-wheel trailer with your gooseneck hitch 5th-Wheel pin box replaces the factory pin box on your trailer Coupler attaches to your truck's gooseneck hitch ball Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to truck and vice versa Reduces chucking and rough fore-and-aft motion Limits bounce and jarring up-and-down motion No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Self-latching lever automatically engages when hitch ball is in socket Cross-shaped holes provide attachment points for safety chains (GY49GR - sold separately) Heavy-duty steel construction Powder coat finish resists wear and corrosion Simple, bolt-on installation Mounts with existing bolts Made in the USA Specs: Designed to replace Lippert 1621 and 1621 HD 5th-wheel pin boxes Towing capacity: 30,000 lbs Ball size: 2-5/16" 5-Year limited warranty Notes: Average break-in period for hitch = 1,000 miles. To calculate correct pin weight for Gen-Y hitches, use this formula: GVWR x 0.22 Fifth Wheel to Gooseneck Adapter Say your truck has a gooseneck hitch for towing your horse trailer, but you want to go camping with your new fifth wheel.
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.Easy-to-Remove, Simple-to-Store Hitch Ball The durable steel hitch ball included with the Turnoverball system secures in the hitch with a sturdy, 5/8" thick steel pin that is incorporated into the end of the operating handle. To lock the ball in place, drop it into the hitch hole in the bed of your truck.
This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.Features: Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle Hidden cross tube provides a clean, from-the-factory look Easy, bolt-on installation - no drilling or welding required Hardware is included Sturdy, lightweight alloy construction Alloy is made of recycled materials and combines aluminum, steel, and stainless steel Black powder coat finish offers superior rust protection Meets SAE J684 towing safety regulations Made in the USA Specs: Receiver opening: 2" x 2" Rating: Class III Maximum gross trailer weight : 5,000 lbs Maximum tongue weight : 750 lbs Not rated for weight distribution systems Limited lifetime warranty Hidden Cross Tube for a Clean, Factory Look The EcoHitch Hidden trailer hitch is designed to be as inconspicuous as possible.
Whether you're driving, off hiking, or relaxing at camp, you'll always know what's behind your RV. Rear camera helps you navigate blind spots while changing lanes on the highway or backing into a tight space - and records video at night.Specs Monitor: Screen size: 7" Resolution: 1024 x 600 Viewing angle: 85 degrees left, right, up, and down Backup Camera: Overall dimensions: 6-5/8" wide x 2-1/2" tall Viewing angle: 140 degrees IP rating: IP65 Number of LEDs: 8 Quantity: 1 General Specifications: Voltage: 12V - 24V DC Camera resolution: 1920 x 1080 Night vision distance: up to 16' Signal strength: 2.4 GHz Distance at high speeds: 100' Distance in open spaces: 492' Warranty: 1-Year warranty Additional Parts You May Need for Installation: Backup camera: 4 #6 x 3/4" Flat head self-tapping screws 4 #4 x 1/4" Self-tapping screws Sealant Insulation tape
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
Filters
