This adapter cord connects your RV to your towed car with a 7-way plug on one end and a 4-way on the other. It's coiled so it won't drag on the ground, and stretches up to 8'. Includes 4-way round socket to install on your vehicle.Features: Powers your braking system, tail lights, and any other towing accessories Plugs into the RV's 7-way socket and the included 4-way round socket on your towed car 4-Way plug mounts on the front of your vehicle and wires to the electrical components of your flat tow setup Won't drag on the ground Stretches up to 96" Resists wear and tear with durable vinyl coating 1-Year limited warranty
Quickly and easily connect your towed vehicle to your RV with this durable, insulated electrical cable. Includes 4-way, round RV and vehicle plugs.Features: 4-Wire extension cord can be used for multiple towing applications Perfect for running power from your RV to your towed vehicle Included 4-way, round, female plugs mount to RV and towed vehicle for quick, easy hookup Coiled cable can expand to 7', yet still contracts to prevent dragging and tangling Silicone-encased wire connections prevent corrosion Constructed of 16-gauge wire Ground wire is 12-gauge Made in USA 1-Year warranty
This adapter converts a 4-way round connector to a 4-way flat connector. The durable ABS plastic adapter is compact, and pull grips on the flat end make it easy to install and remove.Features: Adapter converts a 4-way round trailer connector to a 4-way flat connector Pull grips on flat end make plug easy to install and remove ABS plastic construction is strong and durable Approximate length: 4"
This swivel jack pivots up for travel and down for use. Retracted height is 16". Extended height is 31-1/4". Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 16" Retracted 31-1/4" Extended Lift: 15-1/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-3/4" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
Rust-resistant jack has a retracted height of 16" and an extended height of 31-1/4". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Outer tube has corrosion-resistant black powder coat Corrosion-resistant clear zinc finish for durability Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 16" Retracted 31-1/4" Extended Lift: 15-1/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 7-1/2" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
Black powder coated A-frame jack has a retracted height of 9-1/4" and an extended height of 24". The zinc-finished topwind handle arm has a bolt-head fastener to keep it secure during operation.Features: Utility jack lets you raise and lower your A-frame trailer Topwind handle has zinc finish for attractive look and rust resistance Bolt-head fastener keeps the handle securely on the jack during operation Black powder coat finish resists corrosion Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): 9-1/4" Retracted 24" Extended Lift: 14-3/4" Clearance: 14-7/8" From bottom of bracket to top of handle mount 18-1/2" From bottom of bracket to top of handle 13-1/8" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 6-3/8" Lift capacity: 2,000 lbs 1-Year warranty
This corrosion-resistant, zinc-plated, A-frame jack has a retracted height of 8-1/4" and an extended height of 22-1/2". The topwind handle has a bolt-head fastener to keep it secure during operation.Features: Utility jack lets you raise and lower your A-frame trailer Topwind handle has comfortable, grooved grip Bolt-head fastener keeps the handle securely on the jack during operation Durable, rust-resistant, clear zinc finish Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height: Retracted: 8-1/4" Extended: 22-1/2" Lift: 14-1/4" Clearance: 13" From bottom of bracket to top of handle mount 11-1/4" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Lift capacity: 2,000 lbs Weight: 9.05 lbs 1-Year warranty
Black powder coated A-frame jack has a retracted height of 8-1/4" and an extended height of 22-1/2". The zinc-finished topwind handle arm has a bolt-head fastener to keep it secure during operation.Features: Utility jack lets you raise and lower your A-frame trailer Topwind handle has zinc finish for attractive look and rust resistance Bolt-head fastener keeps the handle securely on the jack during operation Black powder coat finish resists corrosion Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube - with hole still usable - to bottom of bracket): 8-1/4" Retracted 22-1/2" Extended Lift: 14-1/4" Clearance: 13" From bottom of bracket to top of handle mount 16-1/8" From bottom of bracket to top of handle Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 6-3/8" Lift capacity: 2,000 lbs 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
... Built-in grease zerk allows for simple greasing. Retracted height is 11". Extended height is 21-3/4". Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 11" Retracted 21-3/4" Extended Lift: 10-3/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 7" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
... Built-in grease zerk allows for simple greasing. Retracted height is 11". Extended height is 21-3/4". Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Topwind handle has red claw grip for comfortable, easy cranking Corrosion-resistant clear zinc finish for durability Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 11" Retracted 21-3/4" Extended Lift: 10-3/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/4" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Pin size: 9/16" Handle radius: 7-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Heavy-duty kit gets you tow lights that will last for the long haul, with rubber-coated housing, powerful magnetic bases, and a robust wiring harness. Displays brake and turn signals on your trailer or towed car. Comes with a handy carrying case.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Shines brightly enough to be seen up to 1 mile away Mounts securely with heavy-duty magnets Works year-round Made with durable rubber-coated housing and polycarbonate lenses to block out moisture Stores easily with convenient carrying case Includes 2 incandescent lights, wiring harness, 4-way round socket, and carrying case Meets DOT standards Specs: Universal fit for all vehicles Quantity: 2 tow lights Wiring harness: 30' long Light dimensions: 4-1/2" diameter x 3-1/4" thick Carrying case dimensions: 14-3/4" long x 10" wide x 4-1/2" deep Will These Magnetic Lights Work On My Vehicle?
3-3/4" Round. Incandescent trailer light serves as a stop, tail, turn, and license plate light. Durable polycarbonate housing with screw-on lens. ... Features: Combination trailer tail light serves 4 functions when properly mounted Stop light, tail light, turn signal light Built-in license plate light illuminates trailer's license plate Incandescent bulb can be easily replaced Durable polycarbonate housing with screw-on lens Red wrap-over lens covers incandescent bulb Compatible with 12V DC systems Stud mount with included 1/4" studs 2-Wire design with power leads - ground through mounting hardware DOT compliant Made in the USA Specs: Configuration: driver side Passenger side: 431800 (sold separately) Dimensions: 3-3/4" diameter x 2-5/8" thick Distance between mounting studs (center on center): 2" Bulb type: 1157 Power draw at 12.8V: 2.2 amps Wire length: 10" 1-Year limited warranty
1-1/2" Diameter round. LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diodes. ... Features: Compact LED light illuminates your trailer's license plate Can also be used in utility courtesy light applications Great White series features custom-cut lens optics and ultra-bright white diodes for increased light output LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Chrome-plated steel housing protects top half of light White lens over white LED Compatible with 12V DC systems Simple, snap-in installation Requires 1-1/4" diameter hole for mounting 2-Wire pigtail - includes power lead and ground wire DOT compliant Requires two lights (2nd light sold separately) if mounting to either side of license plate Specs: Dimensions: 1-1/2" diameter x 2-1/8" deep Diodes: 4 Power draw at 12V: 0.02 amps 10-Year limited warranty
5-15/16" Diameter round. Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Durable plastic housing with acrylic lens. ... Features: Low-profile LED RV tail light serves 4 functions Stop, turn, and tail Built-in license plate light illuminates trailer license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable ABS plastic base with acrylic lens Red lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: driver side Passenger side: RVSTL10 (sold separately) Light dimensions: 5-15/16" diameter x 1-5/16" thick Height with license plate bracket: 6-3/4" Distance between mounting holes (center on center): 7" Diodes: 8 Power draw at 12.8V: Stop/turn: 0.117 amps Tail: 0.053 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
Establish a secure connection between your trailer and tow vehicle with this metal, 4-pole plug. Round brass pins ensure minimum voltage drop, and pull grips enable easy insertion and removal.Features: Heavy-duty, metal, 4-pole plug connects trailer to socket on tow vehicle Fits Pollak heavy-duty, 4-pole round pin wiring socket (PK11404) Does not fit Pollak heavy-duty, 4-pole, round pin socket, concealed terminals (PK11410) Round, solid brass terminal pins Minimum voltage drop is ensured Dielectric (non-conducting) grease Prevents corrosion and resistance Solid brass terminal screws Zinc, die-cast housing for durability Finger grips make insertion and removal easy Cable lock with plated steel retainer screw Prevents chafing Provides more support for cables Saves installation time High-impact, ABS thermoplastic interior Includes extended lip for easy removal and replacement Accepts up to #12 gauge wires Interchangeable with competitive brands Specs: Volt rating: 12 volts - 24 volts Current rating: 35 amps Wiring configuration: Color - circuit: White - Ground Return Green - Right Turn and Brake Lights Yellow/Red - Left Turn and Brake Lights Brown - Tail Lights 1-Year limited warranty
Convert a 4-way flat trailer connector to a 7-way round connector with this adapter. The pigtail harness hardwires into your vehicle's existing wiring. ... Features: Adapter converts your vehicle's 4-way flat trailer connector to a 7-way round connector Pigtail harness hardwires to existing wiring for brakes, power, and accessory Built-in cover protects the 7-way end from dirt and moisture when not in use Hinged cover opens 180 degrees for effortless connection Pull grips make 7-way plug easy to install and remove Metal and ABS plastic construction ensures strength and durability Flexible wire between plugs provides wide range of motion Length: 18"
4-5/16" Diameter x 1-15/16" deep; sealed; waterproof; corrosion resistant; flush mount with required grommet; 3-prong plug connection; 10 red super LEDs; clear lensFeatures: Clear, 4" round trailer light serves 3 functions on trailers less than 80" wide Provides stop, turn and tail light Meets DOT requirements in any 360-degree position Great replacement for incandescent lights No bulbs to replace No brittle filaments Crystal Clear (TM) lens Sealed, waterproof housing and lens unit Corrosion resistant 10 Red, super LEDs (Light Emitting Diodes) Conveniently accepts industry-standard, 3-prong plug (sold separately) Flush mounts with grommet - required (A45GB - sold separately) 4-5/16" Diameter x 1-15/16" deep LED light draws 0.413/0.026 amps at 12.8 volts DOT approved Lifetime warranty on LEDs Flush mount, red, stop/turn/tail light.
Add compact side marker or clearance lighting with this 3/4" round yellow LED light. It includes a grommet, hardwired 7-1/2" leads, and a durable polycarbonate lens and housing for road-ready visibility.Features: 3/4" Round LED light works as a marker or clearance light Yellow lens and LED provide visibility for front or side applications Single-diode design gives you compact lighting with low power draw Included A11GB grommet creates a clean, secure mount Hardwired 2-wire design connects directly to your trailer or vehicle wiring Black wire connects to power and white wire connects to ground Polycarbonate lens and housing help resist damage from regular road use Compatible with 12V and 24V electrical systems Meets FMVSS PC requirements Specs: Light type: LED marker/clearance light Shape: Round Size: 3/4" Color: Yellow Dimensions: 3/4" wide x 3/4" tall x 15/16" deep Diodes: 1 Voltage: 12V-24V Mount: Grommet mount Included grommet: A11GB Connection: Hardwired Lead length: 7-1/2" Wire functions: Black: Power White: Ground Amp draw: 0.052 amps FMVSS rating: PC Lens material: Polycarbonate Housing material: Polycarbonate Weight: 0.022 lbs Warranty: Lifetime LED warranty
This 4" round grommet light drops into standard holes to keep your trailer visible and compliant. Sealed, UV tough, and low draw, it delivers bright stop, turn, and tail signals without the hassle.Features: Smooth, high-visibility Stop/Turn/Tail LED in a 4" round form factor Grommet-mount design fits industry-standard 4" round applications Impact-resistant, UV-stable automotive-grade polycarbonate lens TecSeal urethane potting for guaranteed circuit board protection IP68 hermetic seal - dustproof and waterproof Meets FMVSS 108 requirements for wide and narrow vehicles Reliable performance rated over 100,000 hours Wire colors: White - Ground, Red - Stop/Turn, Black - Tail (low/dim) Specs: Dimensions (grommet mount): 4-5/16" diameter x 2-7/16" depth LEDs: 8 Voltage: 9-14 VDC Current (red/stop-turn): 0.11 A - 0.15 A Connector: Tri-Pole Mounting: Grommet; fits standard mounting holes Ingress rating: IP68 Compliance: FMVSS 108 Construction: UV-resistant polycarbonate lens; TecSeal urethane potting Service life: rated over 100,000 hours Lifetime warranty TecNiq has designed this high visibility stop, tail, and turn light to ensure you are seen in all conditions and at great distances.
One light does it all. This 4" round grommet lamp drops into standard holes to handle stop, turn, tail, and reverse. Sealed, UV tough, and low draw, it keeps your trailer visible and compliant from campsite to jobsite.Features: Combination Stop/Turn/Tail and Reverse LED in a 4" round package Grommet mount fits standard 4" round applications Grommet (TN43TR) is sold separately Low current draw: high-intensity stop/turn uses ~0.13 A at 12 VDC; reverse adds 0.3 A TecSeal urethane potting protects the circuit board UV-resistant, automotive-grade polycarbonate lens IP68 rated - dustproof and waterproof with hermetic seal Meets FMVSS 108 requirements for wide and narrow vehicles Reliable performance rated over 100,000 hours Wire colors: White - Ground, Red - Stop/Turn, Black - Reverse Specs: Dimensions (grommet mount): 4-5/16" diameter x 1-5/8" depth LEDs: 8 red / 2 white Voltage: 9-14 VDC Current - Stop/Turn (red): 0.11 A to 0.15 A Current - Reverse (white): 0.3 A Connector: Tri-Pole Mounting: Grommet; fits standard mounting holes Ingress rating: IP68 Compliance: FMVSS 108 Construction: TecSeal urethane potting; UV-resistant polycarbonate Service life: rated over 100,000 hours Lifetime warranty TecNiq has designed this high visibility stop, tail, turn, and reverse light to ensure you are seen in all conditions and at great distances.
Quality LED lighting from trailers and trucks to marine and emergency gear. Easily installed, rugged and lifetime guaranteed for demanding use.Features: Powered by 12 high efficiency LEDs integrated ON/OFF switch Sleek surface mount design with hidden mounting holes Frosted acrylic lens for even light distribution Comes with 8" sheathed pigtail Parallel mounting clips sold separately Specs: Measurements: 4 1/2" x 1" LEDs: 12 Brightness: 300 lumens Color: White Voltage: 9 to 14 volts DC Mounting: surface mount Wiring: 8" sheathed pigtail
Filters
