Swap between all your different hitch accessories with this adapter. It converts a 3" receiver into a 2-1/2" or 2" receiver. Includes pin and clip. Not for towing; use for hitch accessories only.Features: Adapts 3" hitch receiver into 2-1/2" or 2" receiver to work with your accessory Nested design: outer sleeve for 2-1/2" reciever; add inner sleeve for 2" Stays in place with tabs Includes 4" hitch pin and clip Made of heavy-duty steel with black powder coat finish Specs: Dimensions: Large tube: 6-1/4" long x 3" wide x 3" tall Smaller tube: 6-1/4" long x 2-1/2" wide x 2-1/2" tall Distance from center of hitch pin hole to front of the tubes: 2-3/4" Distance from from center of hitch pin hole to back of tubes: 3-1/2" Note: Do not use for towing.
This 5/8" diameter receiver lock codes to your vehicle's ignition key. Made of automotive grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your ball mount safe and secure.Features: Hitch lock is used in place of a standard pin and clip to prevent theft of your ball mount or hitch-mounted accessories Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT cylinder Turn the key once Lock is permanently coded to your key 6-Plate tumbler sidebar prevents picking or bumping Automotive-quality lock is durable and weatherproof Cast zinc cylinder offers superior corrosion resistance Stainless steel lock shutter keeps out dirt and moisture Durable, easy-to-grip hard rubber casing protects lock Attached hard rubber dust cover protects lock face Lock cylinder attaches to shaft with double ball bearing locking mechanism Locks automatically when key is removed Stainless steel pin shaft is rustproof Specs: Application: 2", 2-1/2" (Class III, IV, and V), and 3" trailer hitch receivers Pin diameter: 5/8 inch Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
Designed for wide 2" and standard 2-1/2" hitches, this hitch lock has a covered keyhole and chrome plating to help prevent corrosion. Steel construction ensures long-lasting dependability. Can be keyed alike to match other etrailer locks.Features: Flush-style trailer hitch receiver lock is used in place of standard pin and clip to prevent theft of ball mount or hitch-mounted accessory Secure your bike rack, cargo carrier, hitch cover and more to your trailer hitch Extended-length pin ensures excellent fit on wider than average, factory 2" hitches Pick-proof screw-and-lock security Hardened steel construction ensures long-lasting dependability Double chrome plated for maximum rust resistance Rubber end and textured lock core make it easy to grip Covered key slot prevents internal corrosion 2 Reversible, automotive-style keys included Locks can be keyed-alike to match other etrailer locks Select "Keyed Alike" from drop down menu above and enter number of locks into Quantity box Made in the USA Specs: Application: 2" x 2" and 2-1/2" x 2-1/2" trailer hitch receivers Inside pin length (span): 3-5/8" Overall length: 6-7/8" Pin diameter: 5/8" 1-Year warranty Note: Lock can be keyed alike to match other etrailer locks.
Adapter lets you use your 1-1/4" hitch-mounted accessories with your 2" x 2" trailer hitch receiver. Sturdy steel is powder coated for corrosion resistance. Hitch pin and clip or hitch lock are sold separately.Features: Reduces your 2" trailer hitch receiver to a 1-1/4" receiver so that you can mount a bike rack, cargo carrier, or other 1-1/4" hitch accessory Durable steel with matte black powder finish and e-coat that resists corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitch receiversReceiver size: 1-1/4" x 1-1/4" Maximum tongue weight: 350 lbs Overall length: 9" Distance between hitch pin holes (center to center): 4-3/8" Distance from receiver end to nearest pin hole: 2-1/2" Distance from accessory end to nearest pin hole: 2" Limited lifetime warranty Notes: Using this adapter will reduce your hitch's weight capacity by 50 percent.
Adapter sleeves let you use 2" and 2-1/2" towing and hitch-mounted accessories with your 3" hitch receiver. Use the small sleeve separately to use 2" accessories with a 2-1/2" receiver. Carbide black powder coat finish.Features: Adapters reduce a 3" x 3" hitch receiver opening to 2-1/2" x 2-1/2" or 2" x 2" Small sleeve can be used separately to reduce a 2-1/2" x 2-1/2" hitch receiver opening to 2" x 2" Lets you use 2-1/2" and 2" towing and hitch-mounted accessories Easy to use - slides directly into your hitch or onto the shank of your accessory Durable, carbide black powder coat finish Specs: Pin hole diameter: 3/4" Limited lifetime warranty
This secure anti-rattle hitch lock dramatically reduces movement and vibration in your towing setup. Extra-long pin fits wide 2-1/2" GM and 2" Toyota hitches. Designed for use with hollow-shank ball mounts and accessories. 5/8" Pin.Features: Trailer hitch receiver lock is used in place of standard pin and clip to prevent theft of ball mount or hitch-mounted accessory Secure your bike rack, cargo carrier, hitch cover, and more to your trailer hitch Anti-rattle pin reduces play and vibration in the hitch connection Place block with spring inside shank of ball mount or hitch accessory Slide ball mount or accessory into hitch receiver Insert pin through hitch pin hole and anti-rattle block with spring Twist pin so ball mount or accessory is pulled tight against side of hitch receiver wall 90-Degree, barrel-style lock swivels for easy access in tight spaces Includes 2 rubber-capped, stainless steel keys Weather-resistant rubber dust cap keeps cylinder free of debris Extra-long pin accommodates wide factory 2" hitch receivers from Toyota and 2-1/2" hitch receivers from GM Chrome finish is self-lubricating and corrosion resistant Sturdy steel construction Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Also fits wide factory 2" Toyota hitch receivers and 2-1/2" GM hitch receivers Ball mount or hitch accessory must have a hollow shank Pin diameter: 5/8" Inside pin length (span): 3-7/8" Overall length: 6-3/4" Note: This device can only be used with hollow-shank ball mounts and hitch accessories.
Build or modify a hitch setup with this 3" receiver tube. Featuring an 18" length and a 5/8" pin hole, it's made from heavy-duty steel for reliable performance. ... Specs Receiver Size: 3" Length: 18" Hitch Pin Hole Diameter: 5/8" Construction: Heavy-duty steel Installation: Requires welding
Designed for 1-1/4" and 2" trailer hitch receivers, this lock is perfect for keeping any hitch accessory or ball mount locked securely to your hitch. Carbon steel construction with black e-coat resists corrosion.Features: Flush-style hitch lock is used in place of standard pin and clip to prevent theft of your ball mount or hitch-mounted accessory Secure your bike rack, cargo carrier, hitch cover, and more to your trailer hitch Textured grips on both ends for improved handling Weather-resistant PVC dust cap keeps cylinder free from water and debris Carbon steel construction with black e-coat is durable and corrosion resistant 2 Keys included Specs: Application: 1-1/4" x 1-1/4" or 2" x 2" trailer hitch receivers Pin diameter: 1/2" Adapter sleeve diameter: 5/8" Inside pin length (span): 2-3/4"
... This stainless steel locking pin is tough as nails and built to fit 2-1/2" Class V receivers like a glove. Rain, shine, or dirt roads - this lock is a workhorse.Specs: Application: 2" x 2" and 2-1/2" x 2-1/2" Class V trailer hitch receivers Pin diameter: 5/8" Inside pin length (span): 3-1/2" Weight rating: 40,000 lbs
Powder coated, carbon steel receiver tube bolts onto your cab and chassis truck's hitch plate to give you a 2" hitch for towing or mounting accessories. Fits standard pintle hook mounting hole spacing.Features: Receiver tube bolts onto the hitch plate on your cab and chassis truck to add towing capabilities Fits standard pintle hook mounting hole spacing Heavy-duty carbon steel construction Black powder coat finish resists corrosion Specs: Receiver opening: 2" x 2" Gross towing weight: 20,000 lbs Maximum tongue weight: 2,000 lbs Hitch pin hole diameter 5/8" Mounting hole spacing: Vertical: 3-1/2" apart on center Horizontal: 3-3/8" apart on center Length from center of pin hole to collared end: 2-1/2" Length from center of pin hole to mounting plate end: 4" Tube thickness: 1/4" Collar thickness: 1/2" Mounting plate dimensions: 6" tall x 5" wide x 1/2" thick Overall length: 6-1/2"
Powder coated, carbon steel receiver tube bolts onto your cab and chassis truck's hitch plate to give you a 2-1/2" hitch for towing or mounting accessories. ... Features: Receiver tube bolts onto the hitch plate on your cab and chassis truck to add towing capabilities Fits standard pintle hook mounting hole spacing Heavy-duty carbon steel construction Black powder coat finish resists corrosion Specs: Receiver opening: 2-1/2" x 2-1/2" Gross towing weight: 20,000 lbs Maximum tongue weight: 2,000 lbs Hitch pin hole diameter 5/8" Mounting hole spacing: Vertical: 5-1/2" apart on center Horizontal: 3-3/8" apart on center Length from center of pin hole to collared end: 2-1/2" Length from center of pin hole to mounting plate end: 4" Tube thickness: 1/4" Collar thickness: 1/2" Mounting plate dimensions: 6" tall x 5" wide x 1/2" thick Overall length: 7"
Give yourself a bit more clearance when using your factory 3" hitch. 24" Cannon hitch extender helps you clear obstacles such as a bed-mounted camper or other items in your truck bed. 10,000-lb Towing capacity and 5,000-lb carry capacity.Features: Hitch extension works with your factory 3" receiver opening to clear obstacles such as a bed-mounted camper to let you tow or use hitch-mounted accessories Heavy-duty design lets you maintain a high towing or carrying capacity Hardened, reinforced pin holes prevent elongation from wear Black powder coat finish resists corrosion Patened, lateral-support safety chains are included Made in the USA Specs: Application: trucks with factory 3" hitch receiversReceiver opening: 2-1/2" Length: 24" Maximum gross trailer weight: 5,000 lbs Maximum GTW when used with weight distribution: 10,000 lbs Maximum tongue weight: 500 lbs Maximum tongue weight when used with weight distribution: 1,000 lbs Lifetime warranty
Insert this heavy-duty mount into your 3" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitch receivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 9" Maximum rise: 9" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 12-3/4" Total length with included ball mount installed: 17-3/8" Total length without ball mount installed: 13" Hitch pin hole diameters: 5/8" and 3/4" Accessory pin hole diameter: 3/4" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit.
Extend your trailer hitch receiver opening so that you can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. ... Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your rear-mounted spare tire Powder coated black finish helps resist rust and corrosion Solid steel shank construction Hitch pin or hitch lock sold separately Specs: Application: 1-1/4" x 1-1/4" receiver hitches Maximum gross trailer weight : 1,750 lbs Maximum tongue weight: 175 lbs Shank length: Overall: 8-3/4" Extension: 5-3/4" from hitch pin hole to hitch pin hole (center to center) From center of hitch pin hole to weld: 3" Note: The limiting factor is the capacity of your hitch or vehicle, whichever has the lowest capacity.
COMING SOON! BOLT is actively working on a hitch receiver lock for Toyota center-cut keys. We'll update info as we get it. Preorder now for quickest deliver. This 5/8" diameter receiver lock codes to your vehicle's ignition key.Features: Available for preorder Hitch lock is used in place of a standard pin and clip to prevent theft of your ball mount or hitch-mounted accessories Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT cylinder Turn the key once Lock is permanently coded to your key 6-Plate tumbler sidebar prevents picking or bumping Automotive-quality lock is durable and weatherproof Cast zinc cylinder offers superior corrosion resistance Stainless steel lock shutter keeps out dirt and moisture Durable, easy-to-grip hard rubber casing protects lock Attached hard rubber dust cover protects lock face Lock cylinder attaches to shaft with double ball bearing locking mechanism Locks automatically when key is removed Stainless steel pin shaft is rustproof Specs: Application: 2", 2-1/2" (Class III, IV, and V), and 3" trailer hitch receivers Pin diameter: 5/8 inch Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
Powder coated, carbon steel tube welds to your cab and chassis truck to give you a 2" receiver for towing. Can be cut and customized to act as the center section of your fabricated hitch.Features: Receiver tube welds onto your heavy-duty cab and chassis truck to add towing capabilities Tube can be trimmed to fit your application Heavy-duty carbon steel construction Black powder coat finish resists corrosion Made in the USA Specs: Receiver opening: 2" x 2" Overall length: 6" Length from center of pin hole to collared end: 2-1/2" Length from center of pin hole to non-collared end: 3-3/4" Tube thickness: 1/4" Collar thickness: 1/2" Gross towing weight: 20,000 lbs Hitch pin hole diameter: 5/8"
Powder coated, carbon steel tube welds to your cab and chassis truck to give you a 2" receiver for towing. Can be cut and customized to act as the center section of your fabricated hitch.Features: Receiver tube welds onto your heavy-duty cab and chassis truck to add towing capabilities Tube can be trimmed to fit your application Heavy-duty carbon steel construction Black powder coat finish resists corrosion Made in the USA Specs: Receiver opening: 2" x 2" Overall length: 8" Length from center of pin hole to collared end: 2-1/2" Length from center of pin hole to non-collared end: 5-3/4" Tube thickness: 1/4" Collar thickness: 1/2" Gross towing weight: 20,000 lbs Hitch pin hole diameter: 5/8"
Powder coated, carbon steel tube welds to your cab and chassis truck to give you a 2" receiver for towing. Can be cut and customized to act as the center section of your fabricated hitch.Features: Receiver tube welds onto your heavy-duty cab and chassis truck to add towing capabilities Tube can be cut to a custom length to fit your application Heavy-duty carbon steel construction Black powder coat finish resists corrosion Made in the USA Specs: Receiver opening: 2" x 2" Overall length: 24" Length from center of pin hole to collared end: 2-1/2" Length from center of pin hole to non-collared end: 21-3/4" Tube thickness: 1/4" Collar thickness: 1/2" Gross towing weight: 20,000 lbs Hitch pin hole diameter: 5/8"
Both 2" and 1-1/4" cargo carriers or bike racks can be used with your 1-1/4" hitch receiver with this adapter. Simple design makes it a snap to use. Much more economical solution than having to buy two bike racks or cargo carriers.Features: Convert any Class II 1-1/4" receiver to a 2" receiver Will not fit Class I 1-1/4" receiver Has black painted finish Measures 6" long from pin hole to pin hole Maximum Tongue Weight - 50 percent of the tongue weight shown on the rating sticker of your trailer hitch Note: shank of hitch accessory (bike rack, etc.) cannot be more than 2-3/4" long from the center of the hitch pin hole to the end of the shank (end that slides into the hitch) Requires hitch pins and clips, sold separately Requires 5/8" pin for 2" receiver (PC3) Requires 1/2" pin for 1-1/4" receiver (PC2) This adapter allows you to use your current hitch accessories in either a 2" or an 1-1/4" receiver hitch.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.Features: Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle Precision, robotic welding maximizes strength and improves fit Bolt-on installation - no welding required Complete hardware kit and installation instructions included Lifetime technical support from the experts at etrailer Matte black powder coat finish over protective base coat offers superior rust resistance Sturdy, square-tube design Ball mount, pin and clip sold separately Made in the USA Mounting hardware may be imported Specs: Receiver opening: 2" x 2" Rating: Class III Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs Limited lifetime warranty Rugged, Matte Black Finish The sturdy steel construction is protected with a matte black finish for added durability.
This stainless steel lock is perfect for keeping any hitch accessory or ball mount locked securely to your 2" x 2" or 2-1/2" x 2-1/2" hitch. Tube-style-key pin lock with 3-5/8" span resists picking, providing peace of mind.Features: Flush-style trailer hitch receiver lock is used in place of standard pin and clip to prevent theft of ball mount or hitch-mounted accessory Secure your bike rack, cargo carrier, hitch cover and more to your trailer hitch Weather-resistant dust cap keeps cylinder free from water and debris Stainless steel construction provides superior durability and corrosion resistance 2 Keyed-alike keys included Specs: Application: 2" x 2" or 2-1/2" x 2-1/2" trailer hitch receivers Pin diameter: 5/8" Inside pin length (span): 3-5/8" Overall length: 6" Limited lifetime warranty 1-Year finish 1-Year parts
This convenient starter kit puts you on the towing fast track. Includes a 9-3/4" long powder coated ball mount with a 3/4" rise and a 1-1/4" drop; a pre-torqued 2" hitch ball; and a pin and clip.Features: Starter kit contains the basic components needed for towing Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball Hitch ball provides connection point for your trailer's coupler Pre-torqued to factory specifications Pin and clip included - hitch lock sold separately Sturdy steel construction with rust-resistant finishes Black powder coat finish on ball mount Chrome-plated hitch ball Zinc finish on pin and clip Ball mount Assembled in the USA Specs: Application: 1-1/4" x 1-1/4" trailer hitch receiver Compatible with Curt Class I and Class II hitches Gross towing weight: 3,500 lbs Tongue weight: 350 lbs Ball diameter: 2" Ball mount length: 9-3/4" from center of hitch pin hole to center of ball hole Rise: 3/4" from top of inside of hitch opening Drop: 1-1/4" from top of inside of hitch opening Warranty: Lifetime for ball mount 1-Year limited for hitch ball and pin and clip
Filters
