Sturdy steel ball mount with hollow shank measures 8-1/2" from center of hitch pin hole to center of ball hole. Angle-cut shank slides easily into your hitch. Powder coat finish over a-coat base provides excellent rust protection.
Replace a lost or damaged remote for your Firestone Air Command Single air spring compressor system. This OEM remote control restores wireless operation and works only with Firestone Air Command Single kits 2922 and 2923.Features: Replaces a lost or damaged remote for your Firestone Air Command Single compressor system Works with Firestone Air Command Single kits 2922 and 2923 Lets you wirelessly adjust air spring pressure from inside your vehicle Direct OEM replacement from Firestone Fits: Firestone Air Command Single Air Spring Compressor Kit: 2922 Firestone Air Command Single Air Spring Compressor Kit: 2923
Moves your trailer's leafsprings to the top of your axle with this kit. For 2-3/8" diameter axles and works with double-eye leafsprings only.Features: Fits 2-3/8" axle Allows moving trailer leafsprings to top of axle For use with double-eye springs only Sleeve bolts allow the setup to install level Will fit up to 1-5/8" wide leafsprings Includes: (2) Spring Seat (8) Nut (4) U-Bolt (2) Tie Plate 4 Nut couplings U-bolt length: 5-1/8"
Double-eye leafspring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leafspring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leafspringSpring capacity: 1,750 lbs Axle capacity: 3,500 lbs Length from center of spring eye to center of spring eye (unloaded): 23-1/8" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 3 Additional dimensions: see table Part Number A B C D e59SR 11-9/16" 12-7/16" 23-1/8" 3-1/2" Note: To ensure proper axle alignment and suspension performance, leafsprings should always be replaced in pairs.
... Up to 3" of suspension travel helps to compensate for different types of terrain. Fits trailers with double-eye leafsprings.Features: Rubber equalizers replace your trailer's factory steel equalizers to upgrade your setup Delivers a smoother, more comfortable ride Reduces stress on your trailer frame Protects trailer contents from getting damaged while towing Up to 3" of up-and-down travel gives your trailer the ability to compensate for different types of terrain Rubber inserts absorb and dampen road shock and vibration Limit back-and-forth chucking Require less maintenance than suspension upgrades that use air bags Easy, bolt-on installation (mounting hardware sold separately) Made in the USA Specs: Application: tandem-axle trailers with 35" wheelbase and double-eye leafsprings To determine your wheelbase, measure the distance between the center of your front wheel to the center of your rear wheel Bolt hole diameter: 9/16" Dimensions: Distance between outer shackle bolt holes (center on center): 8" Distance between hanger bolt hole and outer shackle bolt hole (center on center): 4" Height from shackle bolt hole to hanger bolt hole: 3-1/2" Axle capacity: up to 8,000 lbs Quantity: 2 equalizers 2-Year warranty (or 45,000 miles) Rubber Equalizers Absorb Road Shock and Reduce Chucking Hauling a trailer that's still equipped with standard steel equalizers is bound to produce a less-than-ideal towing experience.
Double-eye leafspring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Leafsprings are an integral part of your trailer suspension system. The leafsprings provide the attachment points for your trailer's axle, suspending it from the frame of your trailer.
Upgrade your trailer's suspension system with these rubber equalizers for a smoother, more comfortable ride. The rubber insert offers up to 3" of suspension travel for greater shock absorption.Features: Rubber equalizers replace your stock equalizers for a smoother ride Rubber insert dampens road shock Provides up to 3" of suspension travel Reduces back-and-forth chucking Requires less maintenance than equalizers with air bags Mounting hardware sold separately Made in the USA Specs: Application: tandem-axle trailer with 33" wheelbase and double-eye leafsprings Axle capacity: 8,000 lbs Dimensions: Distance between outer shackle bolt holes (center on center): 6-1/2" Distance between hanger bolt hole and outer shackle bolt hole (center on center): 3-1/4" Height from shackle bolt hole to hanger bolt hole: 3-1/4" Quantity: 2 equalizers 2-Year warranty (or 45,000 miles) Measuring to Determine Fit How to Measure to Determine Fit
Mount your round, 2-3/8" diameter axle to your trailer's leafsprings with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leafsprings Includes: (4) 5-1/2" Long U-bolts (2) U-Bolt plates for 1-3/4" springs (8) 7/16"-20 Hex nuts Spring seats required for mounting axle to leafspring sold separately Specs: Axle diameter: 2-3/8" Typical 3,500-lb axle Spring width: 1-3/4" Dimensions: see below
Double-eye leafspring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Leafsprings are an integral part of your trailer suspension system. The leafsprings provide the attachment points for your trailer's axle, suspending it from the frame of your trailer.
Double-eye leafspring acts as part of a trailer's suspension system by providing an attachment point for a 4,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leafspring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leafspringSpring capacity: 2,000 lbs Axle capacity: 4,000 lbs Length from center of spring eye to center of spring eye (unloaded): 26" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 4 Additional dimensions: see table Part Number A B C D e22YR 13" 14" 26" 4-1/4" Double-Eye LeafSpring Basics Leafsprings, as you probably know, make up an important part of your trailer's suspension.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.
Suspension kit includes equalizers and hardware for attaching 4 leafsprings to the hangers on your trailer's frame. Works with 33" axle spacing. Built-in grease zerks for easy lubrication. Heavy-duty shackle straps ensure strength.Features: Suspension kit lets you attach 4 leafsprings (sold separately) to your trailer frame Works with 1-3/4" wide double-eye springs Hangers sold separately Equalizers transfer load and impacts from one axle to another by permitting movement between the axles Springs attach to ends of equalizers with included hardware Wet bolts secure equalizers and springs to the hangers on your trailer Grease zerks allow for fast, easy lubrication to keep moving parts functioning at their best Heavy-duty shackle link assemblies with bolts secure springs to equalizers 1/2" thick links are thicker than standard straps for greater durability Bushings fit into spring eyes to help maintain a well-functioning system and ensure proper sizing for suspension bolts Bronze construction resists corrosion Made in the USA Specs: Application: tandem-axle trailers with 1-3/4" double-eye springs Axle spacing: 33" Kit includes: 2 Equalizers Distance between outer shackle bolt holes (center on center): 5-3/4" Distance between hanger bolt hole and shackle bolt hole (center on center): 2-7/8" Height of side bolt hole to hanger bolt hole: 2" Bolt hole diameter: 9/16" (4) 2-1/4" Shackle link assemblies with 9/16" x 3-3/8" long wet bolts (4) 2-1/4" Long shackle links (4) 9/16" x 2-7/8" Long wet shoulder bolts (2) 9/16" x 2-7/8" Long shoulder bolts (8) 9/16" x 1-3/4" Bushings (14) 7/16"-20 Flange nuts 5-Year limited warranty
Extend the life of your trailer's suspension with this heavy-duty hardware kit. 1/2" Thick steel shackle straps will outlast the standard straps on your double-eye leafsprings. Wet bolts and bronze bushings help keep your setup lubricated.Features: Leafspring mounting hardware upgrades your leafspring suspension system Thick shackle straps, wet bolts, and bronze bushings are long-lasting and minimize intensive trailer maintenance Heavy-duty shackle straps replace your factory shackle straps 1/2" Thick shackles are more durable and twice as thick as most stock shackles Wet bolts with built-in grease fittings are long-lasting and ease maintenance Bronze bushings are more durable and last longer than the plastic bushings found on most factory suspensions Work with wet bolts to ensure a well-lubricated setup Quick, simple installation Shackle straps replace your trailer's factory straps Included bolts, nuts, and bushings replace your existing suspension hardware Includes: 8 Shackle straps 8 Wet bolts (for attaching the springs to your equalizers) 6 Wet bolts (for suspending your equalizers and springs from the hangers) 14 Bronze bushings (for spring eyes and equalizer bolt holes) 14 Locknuts Made in the USA Specs: Application: tandem-axle trailers with double-eye leafsprings Shackle strap length (from center of hole to center of hole): 3-1/8" Bolt hole diameter: 9/16" Wet bolt dimensions: 9/16" Diameter x 3-3/8" long 9/16" Diameter x 2-7/8" long Bushing dimensions: Outer diameter: 11/16" Inner diameter: 9/16" Length: 1-3/4" 1-Year limited warranty
Slipper leafspring acts as part of a trailer's suspension system by providing an attachment point for a 10,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Leafsprings are an integral part of your trailer suspension system. The leafsprings provide the attachment points for your trailer's axle, suspending it from the frame of your trailer.
Double-eye leafspring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leafspring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leafspringSpring capacity: 1,000 lbs Axle capacity: 2,000 lbs Length from center of spring eye to center of spring eye (unloaded): 23-1/2" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 3 Additional dimensions: see table Part Number A B C D SP-113275 11-3/4" 12-5/8" 23-1/2" 3-1/2" Note: To ensure proper axle alignment and suspension performance, leafsprings should always be replaced in pairs.
Double-eye leafspring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leafspring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leafspringSpring capacity: 3,000 lbs Axle capacity: 6,000 lbs Length from center of spring eye to center of spring eye (unloaded): 25-1/4" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 5 Additional dimensions: see table Part Number A B C D e34SR 12-3/4" 13-1/3" 25-1/4" 3-1/8" Double-Eye LeafSpring Basics Leafsprings, as you probably know, make up an important part of your trailer's suspension.
Double-eye leafspring acts as part of a trailer's suspension system by providing an attachment point for a 5,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leafspring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leafspringSpring capacity: 2,500 lbs Axle capacity: 5,000 lbs Length from center of spring eye to center of spring eye (unloaded): 25-1/4" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 4 Additional dimensions: see table Part Number A B C D e44SR 12-5/8" 13-1/4" 25-1/4" 3" Double-Eye LeafSpring Basics Leafsprings, as you probably know, make up an important part of your trailer's suspension.
Slipper leafspring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Leafsprings are an integral part of your trailer suspension system. The leafsprings provide the attachment points for your trailer's axle, suspending it from the frame of your trailer.
Double-eye leafspring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leafspring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leafspringSpring capacity: 3,000 lbs Axle capacity: 6,000 lbs Length from center of spring eye to center of spring eye (unloaded): 26" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 6 Additional dimensions: see table Part Number A B C D e94SR 13" 14" 26" 4-1/4" Double-Eye LeafSpring Basics Leafsprings, as you probably know, make up an important part of your trailer's suspension.
Double-eye leafspring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leafspring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leafspringSpring capacity: 1,750 lbs Axle capacity: 3,500 lbs Length from center of spring eye to center of spring eye (unloaded): 23-1/8" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 1-1/16" Number of leaves: 3 Additional dimensions: see table Part Number A B C D 072-009-00 12" - 23-1/8" 3-1/2" Note: To ensure proper axle alignment and suspension performance, leafsprings should always be replaced in pairs.
USA-made leafspring provides an attachment point for your trailer's axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushings with 9/16" inner diameter.Features: Leafspring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Made in the USA Specs: Quantity: 1 leafspringSpring capacity: 1,750 lbs Axle capacity: 3,500 lbs Length from center of spring eye to center of spring eye (unloaded): 23-1/4" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 1/4" Number of leaves: 3 Double-Eye LeafSpring Basics Leafsprings, as you probably know, make up an important part of your trailer's suspension.
Double-eye leafspring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leafspring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leafspringSpring capacity: 3,500 lbs Axle capacity: 7,000 lbs Length from center of spring eye to center of spring eye (unloaded): 24-7/8" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 6 Additional dimensions: see table Part Number A B C D e64SR 12-7/16" 13-3/16" 24-7/8" 3-1/2" The leafsprings provide the attachment points for your trailer's axle, suspending it from the frame of your trailer.
Suspension kit includes equalizers and hardware for attaching 4 leafsprings to the hangers on your trailer's frame. Works with 33" axle spacing.Features: Suspension kit lets you attach 4 leafsprings (sold separately) to your trailer frame Works with 1-3/4" wide double-eye springs Hangers sold separately Equalizers transfer load and impacts from one axle to another by permitting movement between the axles Springs attach to ends of equalizers with included hardware Bolts secure equalizers and springs to the hangers on your trailer Shackle link assemblies with bolts secure springs to equalizers Kit includes: 2 Equalizers 8 Shackle straps 14 Bolts with locknuts Specs: Application: tandem-axle trailer with 1-3/4" wide double-eye springs Axle spacing: 33" Equalizer dimensions: Distance between outer shackle bolt holes (center on center): 5-3/4" Distance between hanger bolt hole and shackle bolt hole (center on center): 2-7/8" Height of side bolt hole to hanger bolt hole: 2" Shackle strap length: 2-1/4" from center hole to center hole Bolt dimensions: 3" long x 9/16" diameter Note: Locknuts are tapered to prevent vibrational loosening.
Mount your round, 3" diameter axle to your trailer's leafsprings with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leafsprings Includes: (4) 7" Long U-bolts (1755892) (2) U-Bolt plates for 1-3/4" springs (TP-3000175) (8) 1/2"-20 Hex nuts (12N) Spring seats required for mounting axle to leafspring sold separately Specs: Axle diameter: 3" Typical 5,200-lb to 7,000-lb axle Spring width: 1-3/4" Thread dimensions: 2" long x 1/2"-20 Dimensions: see below
Filters
